1. Introduction
This manual provides essential information for the proper handling, display, and care of your Jada Toys Just Trucks 1:24 2021 Ford Bronco Die-cast Car. This highly detailed collectible model is designed for enthusiasts and collectors, featuring authentic design and robust construction.
The 2021 Ford Bronco die-cast model is an authentically licensed product from Ford, crafted from durable 100% die-cast metal with premium rubber tires. It features detailed paint, highly stylized wheels, and functional elements such as an opening hood, doors, and tailbed, along with a detailed interior.
2. Components and Features
Your Jada Toys 2021 Ford Bronco Die-cast Car package includes the following:
- 1:24 Scale 2021 Ford Bronco Die-cast Car
- Extra set of wheels
- Tire rack
- Screwdriver (for wheel changes)
Key features of the model include:
- Authentically licensed product from Ford
- Crafted from durable 100% die-cast metal and premium rubber tires
- High-end casting method allowing for feature-rich details
- Opening hood, doors, and tailbed
- Detailed interior
3. Setup
The Jada Toys 2021 Ford Bronco Die-cast Car is ready for display or play right out of the box. No complex assembly is required.
- Unboxing: Carefully remove the die-cast car and its accessories (extra wheels, tire rack, screwdriver) from the packaging. Inspect for any visible damage during transit.
- Initial Inspection: Ensure all movable parts (hood, doors, tailbed) operate smoothly.
- Optional Wheel Change: If you wish to change the wheels, use the provided screwdriver to carefully loosen the screws securing the wheels. Replace with the alternative set and re-tighten the screws. Exercise caution to avoid stripping screws or damaging the model.
Figure 3.1: The 2021 Ford Bronco die-cast car with its doors open, showcasing the detailed interior and the roof-mounted light bar and rack.
4. Operating Instructions
This die-cast model is primarily intended for display and light play. Follow these guidelines for optimal enjoyment and preservation:
- Handling: Always handle the model with care. Avoid dropping or applying excessive force, which can damage delicate parts or paintwork.
- Display: For display purposes, place the model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or paint fading.
- Interactive Features: Gently open and close the hood, doors, and tailbed. Do not force them beyond their intended range of motion.
- Wheel Movement: The wheels are designed to roll smoothly. Avoid forcing them over rough surfaces or applying excessive pressure that could bend axles.
Figure 4.1: A front three-quarter view of the Jada Toys 2021 Ford Bronco die-cast model, highlighting its detailed front grille and headlights.
5. Maintenance
Proper maintenance will help preserve the appearance and longevity of your die-cast model.
- Cleaning: Use a soft, dry, lint-free cloth to gently wipe dust from the model. For stubborn dirt, slightly dampen the cloth with water only. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the paint or plastic components.
- Storage: When not on display, store the model in its original packaging or a protective case to prevent dust accumulation and accidental damage. Keep it in a cool, dry place.
- Moving Parts: Periodically check the functionality of opening parts (hood, doors, tailbed) and wheels. If they become stiff, do not force them. A very small amount of silicone lubricant can be applied to hinges if necessary, but avoid contact with painted surfaces.
Figure 5.1: A top-down rear view of the die-cast Ford Bronco, showing the open doors, roof rack, and spare tire mounted on the back.
6. Troubleshooting
While die-cast models are generally robust, minor issues can occur. Here are some common concerns and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Loose or detached small parts (e.g., mirrors, light bar) | Rough handling, manufacturing variation. | Carefully reattach if possible. For permanent reattachment, a small amount of model-safe adhesive (e.g., super glue gel) can be used, applied sparingly with a toothpick. Avoid getting glue on painted surfaces. |
| Doors/hood/tailbed do not close properly | Misalignment, bent hinge, or debris in hinge mechanism. | Gently check for any obstructions. Carefully try to realign the part. Do not force closure. If a hinge is bent, professional repair may be needed. |
| Wheels do not roll smoothly | Debris in axle, bent axle, or tight fit. | Check for hair or lint around the axle. If the axle appears bent, it may require careful straightening or professional attention. |
| Paint chips or scratches | Impact, abrasion, or rough handling. | Minor chips can sometimes be touched up with model paint matching the original color. For significant damage, consider professional restoration if desired. |
7. Specifications
| Product Dimensions | 8.5 x 3.63 x 3 inches |
| Item Weight | 1.72 pounds |
| Model Number | 33852 |
| Manufacturer Recommended Age | 8 years and up |
| Manufacturer | Jada Toys |
| Material | 100% Die-cast metal, premium rubber tires |
Figure 7.1: A direct front view of the die-cast Ford Bronco, showcasing its detailed grille and bumper with auxiliary lights.
8. Safety Information
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This product is recommended for ages 8 years and up. It contains small parts that may pose a choking hazard for younger children. Adult supervision is recommended during play, especially when changing wheels or handling small components.
9. Warranty and Support
Jada Toys stands behind the quality of its products. For any questions regarding your 2021 Ford Bronco Die-cast Car, including product defects or missing parts, please contact Jada Toys customer support directly.
Please visit the official Jada Toys website for the most current warranty information and contact details. Keep your purchase receipt as proof of purchase.
Manufacturer: Jada Toys
Website: www.jadatoys.com (Note: This is a placeholder URL as no specific support URL was provided in the input. Please refer to the product packaging or official brand channels for accurate contact information.)
