1. Introduction
This manual provides detailed instructions for the KTC H32S17 32-inch Curved Gaming Monitor. Please read this manual thoroughly before using the product to ensure proper operation and to maximize your user experience. Keep this manual for future reference.

Figure 1.1: Front view of the KTC H32S17 32-inch Curved Gaming Monitor.
2. What's in the Box
Verify that all components are present in the packaging:
- Monitor
- Stand Set
- DP Cable (1.5M/59'')
- Power Cord (1.5M/59'')
- Adapter with 1M Output Line
3. Setup
3.1. Stand Assembly
- Carefully remove the monitor and stand components from the packaging.
- Attach the stand base to the stand neck using the provided screws.
- Secure the assembled stand to the back of the monitor. Ensure it clicks into place or is fastened securely with screws, depending on the design.
3.2. VESA Wall Mount Installation (Optional)
The monitor supports VESA 100x100mm mounting. If using a VESA mount, attach the VESA bracket to the monitor's rear panel after removing the stand. Refer to your VESA mount's instructions for specific installation steps.
3.3. Connectivity
Connect the monitor to your computer or other devices using the appropriate cables.
- DisplayPort (DP 1.4 x 2): For optimal performance, including 170Hz refresh rate and FreeSync/G-Sync compatibility, use the DisplayPort connection.
- HDMI (HDMI 2.0 x 2): Connect to devices supporting HDMI. Note that maximum refresh rates may vary depending on the HDMI version and device capabilities.
- Headphone Jack (x1): Connect headphones or external speakers.
- USB (Upgrade only): This port is for firmware upgrades only.
- DC Input: Connect the power adapter here.

Figure 3.1: Rear view of the monitor with port labels and joystick control.
3.4. Power On
- Connect the power adapter to the monitor's DC input and then plug it into a power outlet.
- Press the power button (often integrated with the joystick) to turn on the monitor.
4. Operating Instructions
4.1. On-Screen Display (OSD) Navigation
The monitor features a joystick control, typically located on the bottom right of the monitor, for navigating the OSD menu. Press the joystick to access the main menu, then move it up, down, left, or right to select and adjust settings.
4.2. Display Features
- Resolution: The monitor supports Wide Quad High Definition (WQHD) 2560 x 1440p resolution.
- Refresh Rate: Experience smooth visuals with a 170Hz refresh rate.
- Response Time: Features a 1ms (MPRT) response time for reduced motion blur.
- Curvature: The 1500R curved HVA panel provides an immersive viewing experience.
- Color Gamut: Offers 120% sRGB color gamut coverage and HDR10 support for vibrant and accurate colors.

Figure 4.1: Visual representation of 60Hz versus 170Hz refresh rate performance.

Figure 4.2: Illustration of the monitor's 1500R curvature and 178° viewing angle.

Figure 4.3: Details on 120% sRGB, 3500:1 contrast ratio, HDR10, and 16.7M display colors.
4.3. Adaptive Sync Technology
The monitor supports FreeSync Premium and G-Sync Compatible technologies to synchronize the graphic card and monitor refresh rates, eliminating screen tearing and stuttering for smoother gameplay.

Figure 4.4: Demonstration of Adaptive-Sync reducing input lag for a smoother experience.
4.4. Game Assist Modes
Utilize built-in game assist features:
- Crosshairs: Provides an on-screen crosshair for improved aiming accuracy in FPS games.
- Black eQualizer: Enhances visibility in dark areas of the screen, revealing hidden details.
- GAMEPLUS Timer: An on-screen timer for tracking in-game events.
4.5. Eye Saver Mode
Activate Eye Saver Mode to reduce blue light emissions and minimize screen flickering, contributing to reduced eye strain during extended use.
5. Maintenance
5.1. Cleaning the Screen
To clean the monitor screen, gently wipe it with a soft, lint-free cloth. For stubborn marks, lightly dampen the cloth with water or a non-abrasive screen cleaner. Avoid using harsh chemicals, alcohol, or ammonia-based cleaners, as these can damage the screen surface.
5.2. Cleaning the Casing
Wipe the monitor casing with a soft, dry cloth. Do not use liquid cleaners directly on the casing to prevent liquid from entering internal components.
5.3. General Care
- Avoid placing heavy objects on the monitor or its cables.
- Do not expose the monitor to direct sunlight or extreme temperatures.
- Ensure adequate ventilation around the monitor to prevent overheating.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Power cable disconnected; Video cable disconnected; Monitor off; Incorrect input source. | Check power and video cable connections. Ensure monitor is on. Select correct input source via OSD. |
| Image flickering or stuttering | Adaptive Sync not enabled; Outdated graphics drivers; Faulty cable. | Enable FreeSync/G-Sync in monitor OSD and graphics card settings. Update graphics drivers. Try a different DisplayPort cable. |
| HDR not working or picture is dark | HDR not enabled in monitor or system settings; Incompatible cable. | Ensure HDR is enabled in both the monitor's OSD and your operating system's display settings. Use a high-quality DisplayPort or HDMI 2.0 cable. |
| Underscan/Black borders on DisplayPort | Graphics card scaling settings; Monitor scaling limitations. | Adjust scaling settings in your graphics card control panel (e.g., AMD Adrenalin, NVIDIA Control Panel). The monitor's OSD may not offer picture size adjustments for DisplayPort. |
| No audio from headphone jack | Incorrect audio output selected; Volume too low. | Ensure the monitor is selected as the audio output device in your computer's sound settings. Check monitor and system volume levels. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | H32S17 |
| Screen Size | 32 Inches |
| Screen Resolution | 2560 x 1440 Pixels (WQHD) |
| Max Screen Resolution | 2560 x 1440 Pixels |
| Refresh Rate | 170Hz |
| Response Time | 1ms (MPRT) |
| Curvature | 1500R |
| Panel Type | HVA Fast Panel |
| Color Gamut | 120% sRGB |
| HDR Support | HDR10 |
| Adaptive Sync | FreeSync Premium & G-Sync Compatible |
| Viewing Angle | 178° (Horizontal & Vertical) |
| Contrast Ratio | 3500:1 |
| Display Colors | 16.7 Million (8-bit) |
| Inputs | 2x DisplayPort 1.4, 2x HDMI 2.0, 1x USB (Upgrade only), 1x Headphone Jack |
| VESA Mount | 100x100mm |
| Dimensions (LxWxH) | 6.69 x 31.1 x 21.06 inches |
| Item Weight | 6.98 pounds |
| Color | BLACK |
| Voltage | 19 Volts (DC) |
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KTC support website. Keep your purchase receipt as proof of purchase for warranty claims.
Additional support documents, such as a detailed User Guide and Installation Manual, may be available for download from the manufacturer's website:







