Introduction
This manual provides instructions for the safe assembly, installation, and maintenance of your HOMCOM 36.5" x 23.5" Large Farmhouse Arch Window Wall Mirror (Model: 830-487V80ND). Please read all instructions carefully before proceeding and retain this manual for future reference.
Safety Information
- Always handle the mirror with care to prevent breakage.
- Ensure the wall mounting surface is structurally sound and capable of supporting the mirror's weight.
- Use appropriate hardware for your specific wall type (e.g., drywall anchors, stud screws). Mounting hardware is not included.
- Keep children and pets away from the mirror during installation.
- Do not hang the mirror in areas where it may be easily bumped or knocked down.
- Clean the mirror using a soft, lint-free cloth and a non-abrasive glass cleaner.
Package Contents
Verify that all components are present before beginning assembly.
- 1 x HOMCOM 36.5" x 23.5" Large Farmhouse Arch Window Wall Mirror
- Note: Mounting hardware (screws, anchors) is not included and must be purchased separately based on your wall type.
Specifications
| Brand | HOMCOM |
| Model Number | 830-487V80ND |
| Overall Dimensions | 36.5" L x 23.5" W |
| Frame Material | Engineered Wood |
| Mirror Material | Thick Glass with Scatter and Oxidation Prevention |
| Mounting Type | Wall-Mounted (2 built-in hooks) |

Figure 1: Product Dimensions
Setup and Installation
- Unpack the Mirror: Carefully remove the mirror from its packaging. Inspect for any damage. Retain packaging materials until you are satisfied with the product.
- Choose a Location: Select a suitable wall location. Consider the mirror's weight and ensure the wall can support it. Avoid areas with high humidity or direct sunlight that could affect the frame over time.
- Determine Mounting Points: The mirror features two built-in hooks on the back for wall mounting. Measure the distance between these hooks.
- Mark Wall for Drilling: Using a level, mark two points on the wall that correspond to the distance between the mirror's hooks. Ensure these marks are level.
- Install Wall Anchors/Screws: Drill pilot holes at the marked locations. Insert appropriate wall anchors (e.g., drywall anchors for drywall, plastic anchors for masonry) if not drilling into a wall stud. Then, insert screws into the anchors or directly into studs, leaving a small portion of the screw head exposed for the mirror hooks to rest on.
- Hang the Mirror: Carefully lift the mirror and align the built-in hooks with the installed screws on the wall. Gently lower the mirror until it rests securely on the screws. Ensure the mirror is stable and level.

Figure 2: Detail of Frame Connection Point

Figure 3: Mirror Installed in an Entryway Setting
Operating (Usage)
The HOMCOM Arch Window Wall Mirror is designed for decorative and functional use in various indoor settings. It does not require power or complex operation.
- Placement: Ideal for living rooms, bedrooms, entryways, or dining rooms. Its arch window design and distressed wood grain finish complement farmhouse, rustic, and transitional decor styles.
- Light Reflection: Position the mirror to reflect natural light or light from lamps to brighten a room and create a sense of spaciousness.
- Visual Interest: The unique arch and trellis design adds architectural interest to any wall.

Figure 4: Mirror Enhancing a Living Room
Maintenance
- Cleaning the Mirror Surface:
- Spray a small amount of glass cleaner onto a soft, lint-free cloth. Do not spray directly onto the mirror to avoid liquid seeping into the frame.
- Wipe the mirror surface gently until clean and streak-free.
- Avoid abrasive cleaners or harsh chemicals that could damage the mirror's coating or frame finish.
- Cleaning the Frame:
- Wipe the engineered wood frame with a dry or slightly damp soft cloth.
- For stubborn dirt, use a mild wood cleaner, testing it on an inconspicuous area first.
- Avoid excessive moisture.
- Regular Inspection: Periodically check the mounting hardware to ensure the mirror remains securely attached to the wall. Tighten screws if necessary.
- Environmental Conditions: Avoid placing the mirror in direct sunlight for prolonged periods or in areas with extreme temperature fluctuations, as this may affect the wood frame.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror appears unstable or wobbly. | Loose mounting screws or inadequate wall anchors. | Carefully remove the mirror. Ensure screws are fully tightened into appropriate wall anchors or studs. Replace anchors if they are stripped or damaged. Re-hang the mirror. |
| Mirror surface has streaks after cleaning. | Dirty cloth, incorrect cleaner, or residue. | Use a clean, lint-free microfiber cloth. Ensure the glass cleaner is streak-free. Wipe thoroughly until dry. |
| Frame shows signs of warping or discoloration. | Exposure to excessive moisture, direct sunlight, or extreme temperature changes. | Relocate the mirror to an area with stable environmental conditions. Avoid direct sunlight and high humidity. |
Warranty and Support
For warranty information or product support, please contact HOMCOM customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Manufacturer: Aosom LLC
Website: www.aosom.com (Aosom is the parent company of HOMCOM)