WOPET Automatic Cat Feeder FT30 Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your WOPET Automatic Cat Feeder FT30. Please read this manual thoroughly before using the product to ensure proper function and safety for your pets.

Image: The WOPET Automatic Cat Feeder FT30, a white and black unit with a digital display, dispensing dry pet food into a black bowl.

Product Components

The WOPET Automatic Cat Feeder FT30 includes the following components:

• Main Feeder Unit
• Food Tray/Bowl
• Power Adapter
• Desiccant Bag
• Instruction Manual

Setup Guide

1. Unpacking and Initial Assembly

1. Carefully remove all components from the packaging.
2. Press the two buttons located on both sides of the pet feeder and pull up to remove the food bucket.
3. Take out the food tray and other accessories from the food bucket.
4. Insert the provided desiccant bag into the designated compartment in the lid.
5. Install the food tray by sliding it into the base of the feeder.

Image: A diagram illustrating the internal components of the feeder's lid, highlighting the desiccant box and twist-lock mechanism for food freshness.

2. Power Supply

The WOPET Automatic Cat Feeder FT30 supports dual power modes:

• Wired Adapter: Connect the provided power adapter to the port at the base of the feeder and plug it into a wall outlet.
• Battery Backup: Open the battery cover at the base and insert three D-type batteries (not included). This ensures continuous operation during power outages.

It is highly recommended to use both power modes simultaneously to prevent feeding disruptions.

Image: The underside of the feeder, showing the battery compartment for D-cell batteries and the power cord connection point.

3. Filling the Food Tank

1. Open the twist-lock lid on top of the feeder.
2. Fill the food tank with dry pet food. Ensure the kibble size is between 2-15mm.
3. Close the lid by aligning the arrow sign and twisting to lock it securely.

Operating Instructions

Control Panel Overview

Image: A detailed view of the feeder's control panel, showing buttons for manual feeding, up/down arrows, settings, return, and indicators for clock, meals, child lock, and battery.

1. Unlocking the Control Panel

The control panel features a child lock to prevent accidental changes. If the screen is locked (indicated by a lock icon), long-press the 'Setting' button for 3 seconds to unlock it.

2. Setting Current Time

1. Press the 'Setting' button. The clock icon will flash.
2. Use the 'Up' and 'Down' arrow buttons to adjust the hour. Press 'Setting' again to confirm.
3. Use the 'Up' and 'Down' arrow buttons to adjust the minute. Press 'Setting' again to confirm and save.

Image: A time conversion chart comparing 12-hour and 24-hour clock formats, useful for setting the feeder's time.

3. Programming Meal Times and Portions

The feeder allows for 1-6 meals per day, with up to 8 portions per meal (15g each portion).

1. After setting the current time, the first meal icon (1) will flash. Press 'Setting'.
2. Adjust the portion size using the 'Up' and 'Down' arrow buttons. Press 'Setting' to confirm.
3. Adjust the meal time (hour) using the 'Up' and 'Down' arrow buttons. Press 'Setting' to confirm.
4. Adjust the meal time (minute) using the 'Up' and 'Down' arrow buttons. Press 'Setting' to confirm and save.
5. Repeat steps 1-4 for subsequent meals (up to 6 meals).
6. Once all settings are complete, press the 'Return' button to exit to the main menu.

Image: The WOPET FT30 feeder next to a cat, with icons detailing its features: 1-8 portions, 1-6 meals, 3L food tank capacity, and suitable kibble size of 2-15mm.

4. Voice Recording

You can record a 10-second voice message to call your pet at meal times:

1. Long-press the 'Recording' button for 3 seconds.
2. After hearing a "beep" sound, begin recording your message.
3. Release the button after recording. Two "beeps" will confirm the recording is complete.
4. The recorded message will play each time food is dispensed.

5. Manual Feeding

To dispense food manually:

1. Ensure the control panel is unlocked.
2. Press the 'Manual' button.
3. Use the 'Up' or 'Down' arrow buttons to select the number of portions.
4. Press the 'Setting' button to dispense the food.

Maintenance and Cleaning

Regular cleaning ensures hygiene and optimal performance of your feeder.

Cleaning the Rotator

1. Remove the food bucket from the main unit.
2. Pull out the cover lid.
3. Turn the rotator counter-clockwise to the open position and carefully remove it.
4. Clean the rotator and the food tank with a damp cloth. Ensure all parts are dry before reassembly.
5. Match the rotator to the indicator, press down, and turn it clockwise to the install position.
6. Insert the cover lid.

The food tray is removable and can be hand-washed. Do not immerse the main feeder unit in water.

Troubleshooting

• Feeder not dispensing food: Check power connection (adapter and batteries). Ensure the food tank is not empty and the rotator is not jammed. Verify meal settings are correctly programmed.
• Control panel unresponsive: Ensure the panel is unlocked by long-pressing the 'Setting' button for 3 seconds. Check battery level.
• Inaccurate portion sizes: Ensure kibble size is within the recommended 2-15mm range. Clean the rotator and dispensing mechanism to prevent blockages.
• Voice recording not playing: Ensure a recording has been successfully saved. Check volume settings if available (not explicitly mentioned but a common feature).

Product Specifications

Warranty and Support Information

For warranty claims, technical support, or any inquiries regarding your WOPET Automatic Cat Feeder FT30, please refer to the contact information provided on the product packaging or visit the official WOPET website. Keep your purchase receipt as proof of purchase for warranty purposes.