TENGA TOC-201XS

TENGA Original Vacuum Cup Extra Gentle (TOC-201XS) Instruction Manual

Model: TOC-201XS

1. Product Overview

The TENGA Original Vacuum Cup Extra Gentle is designed to provide a soft and subtle stimulation experience. It features an elastomer sleeve with detailed internal structures and a urethane foam wall for enhanced sensation. The unique design allows for vacuum control to adjust pressure during use.

Key Features:

TENGA Original Vacuum Cup Extra Gentle product and internal structure diagram

Image 1.1: Overview of the TENGA Original Vacuum Cup Extra Gentle, showing its exterior and internal structure with soft gel and dense details.

Diagram of TENGA Original Vacuum Cup Extra Gentle internal features

Image 1.2: Detailed diagram illustrating the internal features, including the air hole for vacuum control, soft gel, premium urethane, and smooth insertion pad.

2. Setup and Preparation

The TENGA Original Vacuum Cup Extra Gentle is designed for immediate use. Follow these steps to prepare the product:

  1. Unwrap the Product: Carefully remove the outer packaging and any protective seals.
  2. Remove the Cap: Twist or pull off the top cap of the cup. The product is pre-lubricated, so no additional lubricant is typically needed.
  3. Inspect the Interior: Ensure the internal elastomer sleeve is clean and intact before use.
Image showing the top opening of the TENGA Original Vacuum Cup Extra Gentle

Image 2.1: The top opening of the cup, revealing the pre-lubricated entrance.

Three-step image showing how to uncap and prepare the TENGA cup for use

Image 2.2: Step-by-step guide for uncapping the product and preparing it for use.

3. Operating Instructions

To use the TENGA Original Vacuum Cup Extra Gentle, follow these instructions:

  1. Insertion: Gently insert into the opening of the cup. The Smooth Pad will assist with easy entry and lubricant distribution.
  2. Vacuum Control: The cup features an air-hole at the top. To increase the vacuum sensation and tightness, cover the air-hole with your finger or thumb. To release the vacuum and reduce tightness, uncover the air-hole. Experiment with covering and uncovering the hole to find your preferred level of suction and pressure.
  3. Movement: Move the cup up and down to experience the internal textures and sensations.
Hand pressing the air hole on top of the TENGA cup to control vacuum

Image 3.1: Demonstrating how to use the air hole on the top of the cup to control the vacuum pressure.

Diagram illustrating vacuum control and sensation within the TENGA cup

Image 3.2: Diagram showing how vacuum control affects the internal sensation, creating a gentle release or a tight squeeze.

4. Maintenance and Disposal

The TENGA Original Vacuum Cup Extra Gentle is designed for single use and is not intended for cleaning or reuse.

  1. After Use: Once finished, replace the original cap securely onto the cup.
  2. Disposal: Dispose of the used product responsibly according to local waste disposal guidelines. Do not attempt to clean or store for future use.

5. Troubleshooting

This product is designed for simple, single-use operation. If you encounter any issues, please consider the following:

For further assistance, please refer to the manufacturer's official website or contact customer support.

6. Specifications

Product Dimensions2.72 x 2.72 x 6.1 inches
Item Weight5.01 ounces
Model NumberTOC-201XS
MaterialThermoplastic Elastomer (TPE)
ColorWhite
ManufacturerTENGA

7. Safety Information

Please read and adhere to the following safety guidelines:

8. Warranty and Support

Specific warranty information for this disposable product is not provided in the available documentation. For general inquiries or support, please visit the official TENGA website or contact their customer service department.

Manufacturer: TENGA