Introduction
Thank you for choosing the Tribesigns U0088WJ 2-Tier Round End Table. This versatile table features a rustic brown finish and a sturdy metal frame, designed to complement various interior styles. It includes two tiers for convenient storage and display. This manual provides essential information for safe assembly, proper use, and maintenance of your new end table.
Safety Information
WARNING:
- Assembly is required. Ensure all steps are followed carefully to prevent injury or damage.
- Do not exceed the maximum weight recommendation of 70 pounds (31.75 kg). Overloading may cause the table to collapse.
- Always place the table on a flat, stable surface.
- Keep small parts and packaging materials away from children to avoid choking hazards.
- Periodically check all screws and connections to ensure they remain tight.
Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Tribesigns customer support.
- Top Round Shelf (1)
- Bottom Round Shelf (1)
- Metal Frame Sections (4)
- Crossbar Support (1)
- Assembly Guide (1)
- Installation Tool (1)
- Hardware Pack (screws, anti-slip pads)
Assembly Instructions
For a visual guide, please refer to the official Tribesigns assembly video below. It is recommended to assemble the table on a soft surface, such as a blanket or carpet, to prevent scratching.
Official Tribesigns End Table Assembly Video. This video demonstrates the assembly process for the Tribesigns End Table.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Refer to the Assembly Guide and the Package Contents list to identify each part.
- Assemble the Metal Frame: Connect the four metal frame sections using the provided screws and installation tool. Ensure the frame forms a stable structure.
Image: Metal frame components during assembly.
- Attach the Bottom Shelf: Secure the smaller round shelf to the lower section of the assembled metal frame using the designated screws. Ensure it is centered and firmly attached.
Image: Bottom shelf attachment.
- Attach the Top Shelf: Place the larger round shelf onto the top section of the metal frame and secure it with the remaining screws. Ensure all connections are tight.
Image: Top shelf attachment.
- Install Anti-Slip Pads: Attach the anti-slip pads to the bottom of the table legs. These pads protect your floors and enhance stability.
Image: Anti-slip pads on table legs.
- Final Check: Once assembled, gently shake the table to ensure it is stable. Tighten any loose screws if necessary.
Operating Instructions
The Tribesigns 2-Tier Round End Table is designed for indoor use in various settings:
- Placement: Position the table in your living room, bedroom, or reception area as an end table, nightstand, coffee accent table, or lamp table.
- Weight Distribution: Distribute items evenly across both shelves. Avoid placing heavy objects on the edges.
- Maximum Load: Do not place items exceeding 70 pounds (31.75 kg) total weight on the table.
Image: Tribesigns 2-Tier Round End Table in use.
Maintenance
To ensure the longevity and appearance of your Tribesigns end table, follow these maintenance guidelines:
- Cleaning: Wipe the table surfaces with a dry or damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Spills: Promptly clean up any spills to prevent water damage or staining, especially on the wooden surfaces.
- Inspection: Periodically inspect the table for any loose screws or signs of wear. Tighten screws as needed.
- Environment: Avoid placing the table in direct sunlight or near heat sources, which can cause fading or warping.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly or unstable. | Loose screws or uneven floor surface. | Ensure all assembly screws are tightened. Adjust the anti-slip pads on the bottom of the legs to compensate for uneven flooring. |
| Missing parts or hardware. | Packaging error or parts lost during unpacking. | Carefully re-check all packaging materials. If parts are still missing, contact Tribesigns customer support for assistance. |
| Scratches on surfaces. | Improper handling during assembly or use. | Use a soft cloth during assembly. For minor scratches, wood repair kits or markers may be used. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model Number | U0088WJ |
| Product Dimensions (D x W x H) | 19.68"D x 19.68"W x 23.62"H (50cm x 50cm x 60cm) |
| Top Shelf Diameter | 19.68 inches (50 cm) |
| Bottom Shelf Diameter | 15.55 inches (39.5 cm) |
| Item Weight | 37.26 Pounds (16.9 kg) |
| Maximum Weight Recommendation | 70 Pounds (31.75 kg) |
| Frame Material | Metal |
| Top Material Type | Wood (E1 grade particleboard) |
| Color | Rustic Brown |
| Shape | Round |
| Style Name | Industrial |
| Indoor/Outdoor Usage | Indoor |
| Product Care Instructions | Wipe with Dry/Damp Cloth |
Image: Product dimensions diagram.
Warranty and Support
The Tribesigns U0088WJ 2-Tier Round End Table comes with a Limited Warranty. For specific warranty details, claims, or any product-related inquiries, please contact Tribesigns customer support. Free replacement parts are available for any quality problems within 1 year of purchase.
Contact Information: Please refer to the contact details provided in your product packaging or visit the official Tribesigns website for support.
