Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AFWFilters Iron Pro 2 Whole Home Water Softener and Iron Filter. This system is designed to provide comprehensive water treatment for your entire home, effectively removing hardness, iron, manganese, sediment, and rust.
Image: The AFWFilters Iron Pro 2 system, showing the main tank with the Fleck 5600SXT digital metered valve and the separate brine tank. This image highlights the 64,000 grain capacity, 2 cubic foot fine mesh resin, and 5600 SXT digital metered valve.
Safety Information
Please read all safety warnings and instructions before installing or operating the system. Failure to follow these instructions may result in property damage, injury, or death. Keep this manual for future reference.
- Ensure all plumbing connections are secure to prevent leaks.
- Do not operate the system if any components are damaged.
- Always disconnect power before performing any maintenance.
- Follow local plumbing codes during installation.
Setup
Proper installation is crucial for the optimal performance of your Iron Pro 2 system. Refer to the included installation guideline booklet for detailed step-by-step instructions.
Brine Tank Setup
Set up the brine tank according to the manufacturer's instructions. Ensure the overflow line is properly installed and connected to a drain. This prevents water damage in case of an overflow.
Image: A visual guide illustrating the brine tank setup on the left and the bypass valve installation on the right. The brine tank is shown as a black cylindrical unit, and the bypass valve components are displayed separately.
Bypass Installation
Install the 1" MNPT Plastic Bypass onto the plumbing system according to local plumbing codes. The bypass valve allows you to isolate the water softener for maintenance or in case of an emergency without shutting off water to your entire home.
Brine Tank Connection Video
Video: This video demonstrates the process of connecting the brine tank to the water softener system. It shows how to properly install the overflow fitting and connect the brine line.
Operating Instructions
The Iron Pro 2 system features a Fleck 5600SXT digital metered valve for efficient, on-demand regeneration. This means the system regenerates based on your actual water usage, optimizing salt and water consumption.
Initial Startup and Programming
Upon initial startup, follow the programming instructions in your manual to set the water hardness and regeneration cycle. The digital metered valve will track water usage and initiate regeneration cycles automatically when needed.
Image: A family enjoying clean water, illustrating the benefit of the efficient water softener. The text emphasizes meter-based on-demand regeneration with the Fleck 5600SXT valve, complete with brine tank and standard plastic connection.
Water Treatment Capabilities
The Iron Pro 2 effectively removes:
- Hardness: Softens water throughout your home.
- Iron: Up to 6 parts per million (ppm).
- Manganese: Up to 6 parts per million (ppm).
- Sediment, Sand, Rust: Filters out various particulate impurities.
Image: Diagram showing the key features of the Iron Pro 2: 64,000 grain capacity, iron removal up to 6 ppm, and removal of manganese up to 6 ppm, sediment, sand, and rust. The Fleck 5600SXT digital metered valve is prominently displayed.
All-Purpose Use
Enjoy treated water for all household needs, including drinking, cooking, bathing, and laundry.
Image: A collage demonstrating the all-purpose use of softened and filtered water, including washing vegetables, drinking water, laundry, and showering.
Maintenance
Regular maintenance ensures the longevity and efficiency of your water treatment system.
- Salt Level Monitoring: Periodically check the salt level in the brine tank. Refill with high-quality water softener salt as needed to ensure proper regeneration.
- Backflushing: The system is designed to backflush automatically. Some users may experience backflushing approximately every 1000 gallons, depending on water usage and hardness settings.
- Cleaning: Keep the exterior of the system clean. Avoid using harsh chemicals that could damage the unit.
- Resin Bed: The fine mesh resin is pre-loaded in the tank and designed for high iron removal and long life. No regular user maintenance is typically required for the resin bed itself.
Troubleshooting
If you encounter issues with your Iron Pro 2 system, refer to the following common problems and solutions. For more complex issues, contact AFWFilters customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water is not soft or iron is still present. | Low salt level in brine tank, incorrect hardness setting, bypass valve in bypass position. | Check and refill salt. Verify hardness setting on Fleck 5600SXT valve. Ensure bypass valve is in service position. |
| System regenerates too frequently or not enough. | Incorrect water usage programming or hardness setting. | Review and adjust programming on the Fleck 5600SXT digital metered valve according to your water usage and hardness. |
| Loud noise during regeneration cycle. | Normal operation noise, or potential issue with valve components. | Some noise is normal during regeneration. If noise is excessive or unusual, consult the detailed manual or contact support. |
| Water pressure drop. | Clogged pre-filter (if installed), or issues within the softener. | Check and replace any pre-filters. If the issue persists, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | IRONPRO2 |
| Capacity | 64,000 Grain |
| Valve Type | Fleck 5600SXT Digital Metered Valve |
| Resin Type | Fine Mesh Resin (pre-loaded) |
| Iron Removal | Up to 6 ppm |
| Manganese Removal | Up to 6 ppm |
| Other Removals | Hardness, Sediment, Sand, Rust |
| Product Dimensions | 12 x 12 x 48 inches (or 52 inches, depending on availability) |
| Item Weight | 118 pounds |
| Included Components | Complete system, resin loaded in tank, bypass valve, brine tank with safety float, installation guideline booklet. |
Image: A diagram illustrating the dimensions of the Iron Pro 2 main tank (48" or 52" height, 12" diameter) and the brine tank (33" height, 18" diameter).
Warranty & Support
Warranty Information
The AFWFilters Iron Pro 2 system comes with a 5-year manufacturer warranty on the valve. The Pentair tank boasts a 10-year assurance. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty claims, please contact AFWFilters customer service. They are available to provide support and guidance for your water treatment needs.
Visit the official AFWFilters store for more information: AFWFilters Store
