KopBeau HC-01R

KopBeau 1500W Oscillating Space Heater User Manual

Model: HC-01R

Introduction

The KopBeau 1500W Oscillating Space Heater is designed to provide efficient and safe heating for indoor spaces up to 200 sq ft. This modern-style heater features multiple heat modes, a programmable timer, and advanced safety mechanisms to ensure comfort and peace of mind.

Figure 1: KopBeau 1500W Oscillating Space Heater with remote control.

Important Safety Information

Your safety is paramount. Please read and understand all safety instructions before operating this appliance. Failure to do so may result in fire, electric shock, or injury.

ETL Certified: This heater is ETL certified, indicating it meets recognized safety standards.
Overheating Protection: The heater is equipped with an internal sensor that automatically shuts off the unit if it overheats.
Tip-Over Protection: An integrated safety switch automatically turns off the heater if it is accidentally knocked over.
Child Lock Function: Prevents unintended operation by children. Refer to the Operating Instructions for activation.
Flame-Retardant Materials: Constructed with V0-rated flame-retardant materials for enhanced safety.
Plug Overheating: Regularly check the power plug and outlet for signs of overheating. If the plug feels hot to the touch, discontinue use immediately and contact customer support. This indicates a potential electrical issue that could lead to fire.
Placement: Always place the heater on a firm, level surface. Do not block air inlets or outlets. Maintain a minimum distance of 3 feet (0.9 meters) from walls, furniture, and curtains.
Indoor Use Only: This appliance is designed for indoor use only. Do not use outdoors or in wet environments.
Power Supply: Ensure the heater is connected to a 120V, 12.5A power outlet. Do not overload circuits.

KopBeau heater with icons for V0 Flame Resistant, Overheat Protection, and Tip-over Protection

Figure 2: Multifold safety features including flame resistance, overheat protection, and tip-over protection.

Setup

Unpacking: Carefully remove the heater from its packaging. Retain packaging for future storage or transport.
Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure there are no obstructions within 3 feet (0.9 meters) of the front, back, or sides of the heater.
Power Connection: Plug the power cord into a grounded 120V AC electrical outlet. Ensure the outlet is in good condition and not loose.

Operating Instructions

The KopBeau space heater can be operated using the touch control panel on the top of the unit or the included remote control.

Control Panel and Display

Close-up of the LED display and touch function controls on top of the heater

Figure 3: LED Display and Function Control Panel.

Power Button (⏻): Press to turn the heater ON or OFF. When turning off, the unit will display a 15-second countdown to cool down before fully shutting off.
Mode Button (☰): Cycle through heat modes: High, Low, ECO, and Fan Only.
Temperature Adjustment (+ / -): Adjust the desired temperature from 40°F to 99°F in 1°F increments.
Oscillation Button (⟳): Activates or deactivates the 70° wide oscillation feature for broader heat distribution.
Timer Button (◷): Set the auto-off timer from 1 to 24 hours.
Child Lock Button (🔒): Press and hold for a few seconds to activate/deactivate the child lock, preventing accidental changes to settings.

Heat Modes and Efficiency

High Heat (1500W): Provides maximum heating power for rapid warming of spaces up to 200 sq ft.
Low Heat: Offers a lower heat output for sustained warmth and energy saving.
ECO Mode: Automatically adjusts power consumption based on the set temperature and ambient room temperature, optimizing energy efficiency.
Fan Only Mode: Circulates air without heat, useful for general air movement.

Diagram showing High, Low, ECO, and Fan Only modes for the space heater

Figure 4: Four adjustment modes for personalized comfort.

Graph illustrating temperature regulation in Normal Mode vs. ECO Mode

Figure 5: Smart Heating Efficiency in ECO mode for energy saving.

Maintenance

Regular maintenance ensures optimal performance and longevity of your KopBeau space heater.

Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth to wipe the exterior. Do not use abrasive cleaners or allow water to drip into the heater.
Detachable Filter: The heater features a detachable filter for easy cleaning. Regularly clean the filter to ensure clean air circulation and efficient operation.
Figure 6: Detachable filter for easy cleaning and improved air quality.
Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging.

Troubleshooting

Problem	Possible Cause	Solution
Heater does not turn on.	Not plugged in, power switch off, tip-over switch activated, overheating.	Ensure power cord is securely plugged into a working 120V outlet. Check if the main power switch is ON. Ensure the heater is on a flat, stable surface. Allow the unit to cool down for 30 minutes if it has overheated.
Plug or outlet feels hot.	Loose connection, overloaded circuit, faulty wiring.	IMMEDIATELY UNPLUG THE HEATER. Do not use the heater with that outlet. Consult a qualified electrician to inspect the wiring and outlet.
Heater stops working unexpectedly (Model HC-01R).	Internal safety breaker tripped.	This model may have an internal safety breaker that requires manual reset. UNPLUG THE HEATER FROM THE WALL BEFORE ATTEMPTING THIS. Remove the "filter" cover on the back. Remove the 6 Phillips screws. Gently press on the sides of the back cover near the visible seam and at the bottom to release internal plastic tabs. Locate the small heating device between the blue and black power wires on the left (when the device is face down with the base closest to you). Identify the small chrome rod with a black plastic cap on top. Using a small flat-bladed screwdriver, firmly press down on the black cap until it descends into the body of the heating device. This resets the breaker. Reassemble the heater and plug it in. Note: This procedure is based on user-reported repairs and should only be attempted by individuals comfortable with minor appliance disassembly. Always prioritize safety and consult a professional if unsure.

Problem

Possible Cause

Solution

Heater does not turn on.

Not plugged in, power switch off, tip-over switch activated, overheating.

Ensure power cord is securely plugged into a working 120V outlet. Check if the main power switch is ON. Ensure the heater is on a flat, stable surface. Allow the unit to cool down for 30 minutes if it has overheated.

Plug or outlet feels hot.

Loose connection, overloaded circuit, faulty wiring.

IMMEDIATELY UNPLUG THE HEATER. Do not use the heater with that outlet. Consult a qualified electrician to inspect the wiring and outlet.

Heater stops working unexpectedly (Model HC-01R).

Internal safety breaker tripped.

This model may have an internal safety breaker that requires manual reset. UNPLUG THE HEATER FROM THE WALL BEFORE ATTEMPTING THIS.

Remove the "filter" cover on the back.
Remove the 6 Phillips screws.
Gently press on the sides of the back cover near the visible seam and at the bottom to release internal plastic tabs.
Locate the small heating device between the blue and black power wires on the left (when the device is face down with the base closest to you).
Identify the small chrome rod with a black plastic cap on top.
Using a small flat-bladed screwdriver, firmly press down on the black cap until it descends into the body of the heating device. This resets the breaker.
Reassemble the heater and plug it in.

Note: This procedure is based on user-reported repairs and should only be attempted by individuals comfortable with minor appliance disassembly. Always prioritize safety and consult a professional if unsure.

Specifications

Feature	Detail
Brand	KopBeau
Model Number	HC-01R
Power Output	1500W
Voltage	120V
Current	12.5A
Heat Modes	High, Low, ECO, Fan Only
Adjustable Thermostat	40°F - 99°F
Oscillation	70° Wide Oscillation
Timer	1-24 Hours Auto-off
Safety Features	Overheat Protection, Tip-over Protection, Child Lock, V0 Flame-Retardant Materials, ETL Certified
Product Dimensions	5.51"D x 5.51"W x 14.17"H
Recommended Coverage	150-200 sq ft
Indoor/Outdoor Usage	Indoor

Warranty and Support

KopBeau is committed to providing high-quality products. For information regarding product warranty, technical support, or replacement parts, please refer to the contact information provided with your purchase or visit the official KopBeau website.

Protection plans are available for purchase to extend coverage beyond the standard warranty. Please refer to your retailer for details on available protection plans.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.