HMA Legend of Galactic Heroes Imperial Total Flagship Brunhirt 1/8000 Scale Plastic Model Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, customization, and care of your HMA Legend of Galactic Heroes Imperial Total Flagship Brunhirt 1/8000 Scale Plastic Model Kit. This kit allows enthusiasts to recreate the iconic Brunhirt flagship from the Legend of Galactic Heroes series. Please read all instructions carefully before beginning assembly.

The Brunhirt model is designed at a 1/8000 scale and features options for displaying the lower part of the fleet with either the Galactic Empire Crest or the New Galaxy Empire Crest. The kit includes two complete sets of parts, enabling the construction of both versions or two separate models.

Image 1.1: The HMA Imperial Total Flagship Brunhirt 1/8000 Scale Plastic Model Kit, showcasing its sleek design.

2. What's Included

Your HMA Brunhirt 1/8000 Scale Plastic Model Kit package contains the following components:

• Plastic model parts for two (2) complete Brunhirt models.
• Instruction Guide (this document, and potentially a physical guide within the box).
• Decals for Galactic Empire Crest and New Galaxy Empire Crest (if applicable, based on product description).

Note: Adhesives, tools (such as nippers, hobby knife, sanding sticks), and paints are not included and must be purchased separately. This is an unpainted plastic assembly kit.

3. Setup and Assembly

Assembly of the Brunhirt model requires careful attention to detail. Follow the steps outlined below and refer to the detailed diagrams in the physical instruction guide provided in the box.

3.1 Required Tools and Materials (Sold Separately)

• Plastic nippers or sprue cutters
• Hobby knife or craft blade
• Plastic model cement/glue
• Fine-grit sandpaper or sanding sticks
• Paints (acrylic or enamel, as desired for customization)
• Paint brushes or airbrush equipment
• Tweezers (optional, for small parts)

3.2 Assembly Steps Overview

1. Part Preparation: Carefully remove all parts from the sprues using nippers. Use a hobby knife and sandpaper to clean any excess plastic (flash) or nubs from the parts.
2. Sub-Assembly: Begin by assembling smaller sections of the model as indicated in the physical instruction guide. This typically includes engine components, weapon systems, and structural elements.
3. Hull Assembly: Join the main hull sections. Ensure proper alignment before applying adhesive.
4. Detailing: Attach smaller detail parts, such as antennae, sensors, and other external features.
5. Crest Selection: The kit provides two options for the lower part of the fleet: the Galactic Empire Crest and the New Galaxy Empire Crest. Choose your preferred crest and attach it according to the instructions. Since two sets are provided, you can build one of each.
6. Stand Assembly: Assemble the display stand as per the instructions and attach the finished model securely.

Image 3.1: Exploded view of the Brunhirt model components, illustrating the various parts for assembly.

Image 3.2: A detailed view of the Brunhirt model's underside, highlighting the area where the crests are attached.

4. Operating and Display

Once assembled, your Brunhirt model is ready for display or further customization.

4.1 Painting and Finishing

The model comes in a molded color, but for a more realistic appearance, painting is recommended. Use hobby-grade acrylic or enamel paints. Apply thin coats to avoid obscuring details. Refer to reference images of the Brunhirt for accurate color schemes.

4.2 Display

The included display stand allows for stable presentation of your finished model. Position the model in a safe location away from direct sunlight, extreme temperatures, and high humidity to preserve its condition.

Image 4.1: The Brunhirt model mounted on its display stand, showcasing its profile.

5. Maintenance

Proper maintenance will ensure the longevity and appearance of your Brunhirt model.

• Dusting: Regularly dust the model using a soft brush or a can of compressed air. Avoid abrasive materials that could scratch the surface or paint.
• Cleaning: If necessary, gently wipe the model with a soft, damp cloth. Avoid harsh chemicals or solvents, as these can damage the plastic or paint.
• Storage: If storing the model, place it in a protective container away from dust and direct light.

6. Troubleshooting

This section addresses common issues encountered during model assembly.

• Parts Not Fitting: Ensure that you are using the correct parts for each step. Refer to the part numbers in the physical instruction guide. Sometimes, minor trimming or sanding may be required for a perfect fit.
• Adhesive Issues: Use plastic model cement specifically designed for polystyrene plastic. Apply sparingly to avoid damaging the plastic or creating visible glue marks. Allow sufficient drying time.
• Paint Application Problems: If paint is not adhering properly or appears uneven, ensure the surface is clean and free of oils. Apply paint in thin, even coats. Humidity and temperature can affect paint drying and finish.
• Missing or Damaged Parts: Carefully check all sprues and the box contents upon opening. If parts are genuinely missing or damaged, contact the manufacturer's customer support.

7. Specifications

Detailed specifications for the HMA Brunhirt 1/8000 Scale Plastic Model Kit:

Note: Dimensions and weight are approximate for the assembled model or package.

8. Warranty and Support

This product is a plastic model kit. Specific warranty information is typically provided by the manufacturer within the product packaging. For any questions regarding missing parts, assembly difficulties not covered in this manual, or other product-related inquiries, please refer to the contact information provided by the manufacturer, HMA, in the original product packaging or on their official website.

Please retain your proof of purchase for any warranty claims or support requests.