Smoby Little 2-in-1 Bath Seat with Adjustable Activity Tray

Introduction

Thank you for choosing the Smoby Little 2-in-1 Bath Seat. This product is designed to provide a safe and enjoyable bath time experience for your child, combining comfort with engaging activities. Please read this manual carefully before assembly and use to ensure proper function and safety.

Image: The Smoby Little 2-in-1 Bath Seat featuring its ergonomic design and integrated activity tray.

Safety Information

WARNING: NEVER LEAVE YOUR CHILD UNATTENDED IN THE BATH, EVEN FOR A MOMENT. DROWNING CAN OCCUR QUICKLY AND IN SHALLOW WATER.

• Always keep your child within arm's reach.
• Ensure the bath seat is securely attached to a smooth, clean bathtub surface using the suction cups before placing your child in it.
• The bath seat is suitable for children from 6 months of age who can sit up unaided, up to a maximum weight of 18 kg (approximately 3 years).
• Regularly check the bath seat for any signs of wear or damage. Discontinue use if damaged.
• Do not use the bath seat on textured or uneven surfaces, as this may prevent proper suction.
• Always check the water temperature before placing your child in the bath.

What's in the Box

The Smoby Little 2-in-1 Bath Seat package includes:

• 1 x Smoby Little Bath Seat with integrated activity tray

Setup

Assembly of the Smoby Little Bath Seat is required. Follow these steps for secure installation:

1. Prepare the Bathtub: Ensure the bathtub surface where the seat will be placed is clean, smooth, and dry.
2. Position the Seat: Place the bath seat in the desired position in the bathtub.
3. Engage Suction Cups: Press down firmly on the bath seat to engage the suction cups on the bottom. Ensure all suction cups are fully adhered to the bathtub surface. You should hear a click or feel a strong resistance when trying to lift the seat.
4. Verify Stability: Before placing your child in the seat, always test its stability by gently pulling upwards on the seat to confirm it is securely fixed and does not move.

Image: Illustration of the bath seat's dimensions and the easy clip-on system with suction cups for secure attachment.

Operating Instructions

Using the Smoby Little Bath Seat for a fun and safe bath time:

1. Placing Your Child: Once the seat is securely installed and the bath water is at a safe temperature, gently place your child into the seat. Ensure they are comfortably seated and supported.
2. Activity Tray: The bath seat features an adjustable activity tray with various toys: a whale sprayer, a paddle wheel, a water flower, and a cup. These toys are designed to entertain and stimulate your child during bath time.
3. Removing Your Child: To remove your child, use the double-button system to slide the activity tray forward. This provides ample space to safely lift your child out of the seat.
4. Removing the Seat: After bath time, to release the bath seat from the tub, locate the suction cup release tabs (usually small tabs or levers near the suction cups) and lift them to break the seal. Then, lift the seat out of the tub.

Image: A baby enjoying bath time in the Smoby bath seat, with an inset highlighting the interactive features of the activity tray.

Image: Detailed views of the bath seat's interactive elements, including the whale sprayer, paddle wheel, water flower, and cup, along with the suction cup release mechanism.

Image: This graphic highlights how the bath seat's design supports a child's development in logic, motor skills, and sensory perception during play.

Maintenance

To keep your Smoby Little Bath Seat clean and hygienic:

• After each use, rinse the bath seat thoroughly with clean water to remove soap residue and bath products.
• Wipe the seat with a soft cloth and mild soap if necessary. Avoid abrasive cleaners or harsh chemicals.
• Allow the bath seat to air dry completely before storing to prevent mold and mildew.
• Store in a dry, well-ventilated area.

Troubleshooting

Common issues and solutions:

• Seat does not stick to the tub:
  - Ensure the bathtub surface is clean, smooth, and free of soap scum or residue.
  - Make sure the suction cups are clean and free of debris.
  - Press down firmly on the seat to fully engage the suction cups.
• Activity tray is difficult to slide:
  - Check for any obstructions in the sliding mechanism.
  - Ensure the double-button release system is fully pressed when attempting to slide the tray.
• Water toys are not functioning:
  - For the whale sprayer, ensure it is filled with water.
  - Check for any blockages in the water flow for the water flower or paddle wheel.

Specifications

Warranty and Support

Smoby products are manufactured with high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Smoby website.

For customer support, spare parts, or further assistance, please contact Smoby customer service through their official channels. Contact details can typically be found on the product packaging or the Smoby brand website.

Online Resources:

• Visit the Smoby Brand Store for more products and information.