1. Introduction
Thank you for choosing the Outsunny 2-Seat Patio Swing Chair. This manual provides important information for the safe assembly, operation, and maintenance of your new patio swing. Please read this manual thoroughly before assembly and retain it for future reference.

Image 1.1: The Outsunny 2-Seat Patio Swing Chair in a patio setting.
2. Safety Information
To ensure safe use of this product, please observe the following precautions:
- Weight Capacity: Do not exceed the maximum weight capacity of 264 lbs (120 kg) per seat, or 528 lbs (240 kg) total. Overloading can cause structural failure and injury.
- Assembly: Assembly requires two adults. Ensure all parts are correctly installed and fasteners are tightened securely before use.
- Stability: Place the swing on a flat, level surface. Do not use on uneven ground.
- Weather Conditions: Do not use the swing during strong winds, heavy rain, or other severe weather conditions. The canopy should be lowered or removed in high winds to prevent damage.
- Children: Supervise children at all times when they are near or using the swing.
- Maintenance: Regularly inspect the swing for loose bolts, damaged parts, or wear. Replace any damaged components immediately.
- Moving the Swing: Always lift the swing when moving it. Do not drag it, as this can damage the frame or footpads.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support.
- Main Frame Components (Legs, Crossbars)
- Swing Seats (2 units)
- Canopy Frame and Fabric
- Central Storage Table with Cup Holders
- Hardware Pack (Bolts, Nuts, Washers, Wrenches)
- Bungie Cords for Seat Suspension
- Anti-Slip Footpads
- Instruction Manual
4. Assembly Instructions
Assembly typically takes approximately 1 hour with two adults. It is recommended to have a second person assist, especially when attaching the main frame components.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Main Frame: Connect the leg sections and crossbars to form the A-frame structure. Secure all bolts loosely at first, then tighten once the frame is stable.
- Attach Swing Seats: Hang the two swing seats onto the main frame using the provided hooks and bungie cords. Ensure the bungie cords are securely attached to the seat fabric and frame.
- Install Central Storage Table: Position the central console area between the two seats. This includes the tabletop with cup holders and the hidden storage bag. Secure it according to the diagrams.
- Assemble and Attach Canopy: Assemble the canopy frame and slide the fabric onto it. Attach the assembled canopy to the top of the main frame. Ensure it can tilt and lock into position.
- Final Tightening: Once all components are in place, systematically tighten all bolts and fasteners using the provided tools. Do not overtighten.
- Check Stability: Gently shake the assembled swing to ensure it is stable and all connections are secure.

Image 4.1: Detail of the robust frame connection, essential for stability.
5. Operating Instructions
5.1 Using the Swing
Gently sit on the swing seats. The bungie seat suspension provides a comfortable and gentle rocking motion. Avoid excessive force or standing on the seats.
5.2 Adjusting the Canopy
The swing features a tilting sun shade canopy. To adjust the angle, locate the controller mechanism on the side of the canopy frame. Rotate the controller to tilt the canopy to your desired position, blocking direct sunlight. Ensure it is securely locked in place after adjustment.

Image 5.1: The adjustable canopy can be tilted to block the sun.
5.3 Using the Pivot Storage Table
The central console includes a tabletop with two drink holders and a hidden storage space. The tabletop can be rotated outwards for easier access to the seats or to reveal the storage compartment. Use the drink holders for beverages and the hidden bag for small outdoor essentials.

Image 5.2: The central table offers convenient drink holders and hidden storage.
6. Maintenance
6.1 Cleaning
- Frame: Wipe the steel frame with a damp cloth and mild soap. Rinse thoroughly and dry to prevent rust.
- Sling Fabric Seats: The mesh fabric seats are designed to be breathable and quick-drying. Clean with mild soap and water, then air dry. Avoid harsh chemicals.
- Canopy: Clean the canopy fabric with a soft brush or cloth and mild soap. Rinse and allow to air dry completely before folding or storing.

Image 6.1: The sling fabric is designed for comfort and easy maintenance.
6.2 Inspection
Periodically check all bolts, nuts, and connections to ensure they remain tight. Inspect the bungie cords for any signs of fraying or damage. Check the frame for rust or structural integrity issues. Address any problems promptly.
6.3 Storage
During off-season or prolonged periods of non-use, it is recommended to store the swing in a dry, protected area. If storing outdoors, use a weather-resistant cover to protect it from elements.
7. Troubleshooting
- Swing feels unstable: Ensure all bolts are fully tightened. Verify the swing is placed on a flat, level surface. Check for any damaged frame components.
- Canopy does not stay in position: Check the canopy adjustment mechanism. Ensure it is clean and free of debris, and that the locking knob is tightened.
- Squeaking noise during use: Apply a small amount of silicone-based lubricant to the pivot points and spring hooks. Avoid oil-based lubricants that can attract dirt.
- Missing parts during assembly: Refer to the package contents list. If parts are missing, contact Outsunny customer support with your model number and purchase information.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 84A-141BK |
| Brand | Outsunny |
| Color | Black |
| Overall Dimensions (L x W x H) | 68.5" x 43.25" x 64.5" (174 cm x 109.8 cm x 163.8 cm) |
| Single Seat Size (W x D) | 20" x 19.75" (50.8 cm x 50.2 cm) |
| Seat Depth | 19.75 inches |
| Weight Capacity (per seat) | 264 lbs (120 kg) |
| Total Weight Capacity | 528 lbs (240 kg) |
| Frame Material | Powder Coated Steel |
| Seat Material | Mesh Fabric (Sling Fabric) |
| Assembly Required | Yes (Approx. 1 hour with 2 adults) |
| Item Weight | 51.04 lbs (23.15 kg) |

Image 8.1: Detailed dimensions of the swing chair.
9. Warranty and Support
For warranty information, missing parts, or technical support, please contact Outsunny customer service directly. Keep your purchase receipt and model number (84A-141BK) handy for faster service.
Manufacturer: Aosom LLC





