User Manual

Product Overview

This manual provides essential information for the operation and maintenance of your Winner Retro Manual Mechanical Skeleton Watch. This timepiece features a high-quality mechanical skeleton movement, Roman numeral dial with diamond accents, and a leather strap, offering a classic and sophisticated design.

Image: Front view of the Winner Retro Manual Mechanical Skeleton Watch, showcasing its intricate skeleton dial and diamond-studded bezel.

Safety Information

• Keep the watch away from strong magnetic fields to prevent interference with the mechanical movement and ensure accurate timekeeping.
• Avoid exposing the watch to extreme temperatures or sudden temperature changes.
• While the watch is designed for daily wear, it is not intended for swimming or diving. Avoid direct contact with water beyond splashes.
• Handle the watch with care to prevent impacts or drops, which can damage the delicate internal components.

Setup and Initial Operation

Setting the Time

1. Locate the crown on the right side of the watch case.
2. Gently pull the crown outwards to the time-setting position. You may feel a slight click.
3. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
4. Once the time is set, push the crown back into its original position to secure the setting.

Manual Winding

This is a manual mechanical watch and requires daily winding to operate. It does not use a battery.

1. Ensure the crown is pushed fully in (not in the time-setting position).
2. Turn the crown clockwise approximately 15-20 times until you feel resistance. Do not overwind, as this can damage the movement.
3. It is recommended to wind the watch at the same time each day to maintain consistent power reserve.

Image: Close-up view of the watch dial and crown, illustrating the component used for time setting and winding.

Operating the Watch

Once properly wound, your mechanical watch will begin to operate. The transparent skeleton dial allows you to observe the intricate gears and springs in motion.

Image: The watch worn on a wrist, demonstrating its appearance during use.

Luminous Features

The watch hands may feature luminous material for visibility in low-light conditions. Exposure to light will charge the luminous elements.

Image: The watch dial in darkness, highlighting the green luminous glow of the hands.

Maintenance

• Cleaning: Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, use a damp cloth and mild soap if necessary, then dry thoroughly.
• Storage: When not in use for extended periods, store the watch in a cool, dry place, away from direct sunlight and extreme temperatures.
• Servicing: Mechanical watches benefit from periodic professional servicing (typically every 3-5 years) to ensure optimal performance and longevity.

Image: Rear view of the watch, revealing the intricate mechanical movement through the transparent case back.

Troubleshooting

Specifications

• Model Number: GMT1089-2K
• Brand: FORSINING (also associated with T-WINNER)
• Movement: Manual Mechanical
• Case Material: Stainless Steel (implied by description)
• Band Material: Leather (implied by description)
• Clasp Type: Buckle
• Product Dimensions: 9.44 x 0.78 x 0.51 inches
• Item Weight: 2.08 ounces

Image: A diagram illustrating the key dimensions of the watch, including diameter, band width, and case thickness.

Warranty and Support

Your Winner Retro Manual Mechanical Skeleton Watch is designed for durability and performance. For any quality concerns, please contact the manufacturer or seller directly.

Additional protection plans may be available for purchase to extend coverage beyond the standard manufacturer's terms. Please refer to your purchase documentation for details on available plans, such as 2-Year Protection Plan, 3-Year Protection Plan, or Complete Protect options.

For after-sale service, please contact WINNER Watch customer support. They are committed to providing satisfactory assistance for any inquiries regarding your watch.