BWE 1012-S-Black-1

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

BWE 5-Piece Matte Black Bathroom Hardware Set Instruction Manual

Model: 1012-S-Black-1

1. Product Overview

This BWE 5-piece bathroom hardware set provides essential accessories for your bathroom, featuring a modern matte black finish and durable SUS304 stainless steel construction. The set includes a single towel bar, a hand towel holder, a toilet paper holder, and two robe hooks, designed for wall-mounted installation.

BWE 5-Piece Matte Black Bathroom Hardware Set

Image 1.1: Complete BWE 5-Piece Matte Black Bathroom Hardware Set.

BWE Bathroom Hardware Set installed in a modern bathroom

Image 1.2: The hardware set installed in a contemporary bathroom setting.

2. Package Contents

Verify that all components are present in the package before beginning installation:

  • 1 x 21.9-inch Single Towel Bar
  • 1 x Hand Towel Holder
  • 1 x Toilet Paper Holder
  • 2 x Robe Hooks
  • Mounting Hardware (screws, wall anchors, hex wrench)
Contents of the BWE bathroom hardware set package

Image 2.1: The complete hardware set and its packaging.

3. Specifications

FeatureDetail
MaterialSUS304 Stainless Steel
FinishMatte Black
Installation TypeWall-Mounted, Screw-In
Total Item WeightApproximately 3.49 pounds (1.58 kg)
Package Dimensions25 x 5 x 3 inches (63.5 x 12.7 x 7.6 cm)
Individual components of the BWE bathroom hardware set on a scale, showing their weight

Image 3.1: Components on a scale, demonstrating the solid construction.

4. Installation Instructions

This hardware set is designed for screw wall mounting. Detailed installation instructions and all necessary screw fittings are included in your package. Please follow the steps below for a secure installation.

4.1. Tools Required (Not Included)

  • Pencil
  • Drill
  • Drill bit (appropriate size for wall anchors)
  • Hammer (optional, for wall anchors)
  • Screwdriver
  • Measuring tape

4.2. General Mounting Steps

  1. Positioning: Choose the desired location for each item. Use a pencil to mark the drilling points for the mounting bracket.
  2. Drilling: Drill holes at the marked points. Ensure the drill bit size matches the wall anchors provided.
  3. Anchoring: Insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if necessary until flush with the wall surface.
  4. Mounting Bracket: Align the mounting bracket with the anchors and secure it to the wall using the provided screws.
  5. Attach Item: Place the hardware item (towel bar, holder, hook) onto the secured mounting bracket.
  6. Secure Item: Use the small hex wrench to tighten the set screw, typically located on the underside of the item's base, to firmly attach it to the mounting bracket.

4.3. Individual Item Dimensions and Placement

4.3.1. Single Towel Bar

Dimensions: Approximately 21.9 inches (55.6 cm) in length, with a projection of 3.07 inches (7.8 cm) from the wall.

Dimensions of the BWE 21.9-inch single towel bar

Image 4.1: Single Towel Bar with detailed dimensions.

4.3.2. Hand Towel Holder

Dimensions: Approximately 9.06 inches (23 cm) in length, with a projection of 3.07 inches (7.8 cm) from the wall.

Dimensions of the BWE hand towel holder

Image 4.2: Hand Towel Holder with detailed dimensions.

4.3.3. Toilet Paper Holder

Dimensions: Approximately 4.72 inches (12 cm) in length, with a projection of 3.07 inches (7.8 cm) from the wall.

Dimensions of the BWE toilet paper holder

Image 4.3: Toilet Paper Holder with detailed dimensions.

4.3.4. Robe Hooks (2 included)

Dimensions: Base is approximately 2.17 inches (5.5 cm) square, with a projection of 2.28 inches (5.8 cm) from the wall.

Dimensions of the BWE robe hook

Image 4.4: Robe Hook with detailed dimensions.

5. Care and Maintenance

To maintain the matte black finish and extend the lifespan of your bathroom hardware set, follow these care instructions:

  • Clean regularly with a soft, damp cloth.
  • Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
  • Dry the hardware immediately after cleaning to prevent water spots.

6. Troubleshooting

If you encounter any issues with your hardware set, consider the following:

  • Loose Item: If an item becomes loose, check the set screw on the underside of the base and tighten it with the hex wrench.
  • Unstable Installation: Ensure that the wall anchors are fully inserted and the mounting bracket is securely fastened to the wall. If installing into drywall without a stud, proper wall anchors are crucial.

7. Warranty and Support

BWE products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the documentation included with your purchase or visit the official BWE store online.

For additional products and information, visit the BWE Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.