1. Introduction
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Fellowes LX25 Paper Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.
The Fellowes LX25 is designed for personal use, offering cross-cut shredding for enhanced security of your documents.
2. Important Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the shredder.
- Keep hands, hair, and loose clothing away from the paper entry slot.
- Keep children and pets away from the shredder at all times.
- Unplug the shredder before moving, cleaning, or emptying the waste bin.
- Do not use aerosol products, petroleum-based lubricants, or other flammable products on or near the shredder.
- Do not shred metal objects, wet paper, or adhesive materials as this can damage the cutting mechanism.
- The shredder features a Patented Safety Lock. Always engage the safety lock when the shredder is not in use to prevent accidental operation.
Image: A hand is shown pushing a switch on the top of the shredder, labeled 'Safety Lock', indicating the activation of the safety feature.
3. Package Contents
Verify that all items are present in the package:
- Fellowes LX25 Shredder Unit
- Waste Bin
- Instruction Manual (this document)
4. Setup
- Unpack the Shredder: Carefully remove all packaging materials from the shredder and its components.
- Position the Shredder: Place the shredder on a flat, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and operation.
- Insert Waste Bin: Ensure the waste bin is correctly inserted into the shredder unit. The shredder will not operate if the bin is not properly seated.
- Connect Power: Plug the power cord into a standard electrical outlet.
Image: The Fellowes LX25 shredder is positioned on the floor next to an office desk, illustrating its compact size and typical placement. Dimensions are indicated as 14¼" H x 12⅜" W x 8⅛" D.
5. Operating Instructions
- Power On: Locate the power switch on the top of the shredder. Slide the switch to the 'ON' position.
- Disengage Safety Lock: If the safety lock is engaged, slide the safety lock switch to the 'UNLOCKED' position.
- Feed Documents: Insert up to 6 sheets of paper into the paper entry slot. The shredder will automatically start and stop.
- Shredding Other Materials: The LX25 can also shred staples, small paper clips, and plastic credit cards. Insert these items one at a time into the paper entry slot.
- Continuous Operation: The shredder is designed for intermittent use. It has a maximum continuous run time of approximately 3 minutes, followed by a cool-down period.
- Power Off and Engage Safety Lock: When finished shredding, slide the power switch to the 'OFF' position and engage the safety lock for security.
Image: A hand feeds multiple sheets of paper into the shredder's entry slot. Graphics indicate a sheet capacity of 6 sheets and illustrate the cross-cut shredding pattern (5/32" x 1¼"). Icons also show that staples, paper clips, and credit cards can be shredded.
Image: The shredder is displayed alongside icons indicating it is suitable for 1 user, has a run time of up to 3 minutes, and operates quietly.
6. Maintenance
- Emptying the Waste Bin: Regularly check and empty the 3-gallon waste bin to prevent paper jams and ensure optimal performance. Always unplug the shredder before removing the bin.
- Cleaning the Shredder: Use a soft, dry cloth to clean the exterior of the shredder. Do not use abrasive cleaners or solvents.
- Oiling the Blades: For optimal performance and longevity, it is recommended to oil the shredder blades periodically (e.g., after every 30 minutes of accumulated shredding or when performance decreases). Use a shredder-specific oil and follow the oil manufacturer's instructions.
Image: A person's hands are shown lifting the top section of the shredder, exposing the waste bin below, which contains shredded paper. Text indicates 'Less Mess' and that the '3 gallon bin holds 60 shredded sheets'.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shredder does not turn on. | Not plugged in; Waste bin not properly seated; Safety lock engaged; Overheat protection activated. | Ensure power cord is securely plugged in. Re-seat the waste bin. Disengage the safety lock. Allow shredder to cool down for 20-30 minutes. |
| Paper jam. | Too many sheets inserted; Material not suitable for shredding. | Unplug the shredder. Carefully remove paper from the entry slot. If accessible, remove paper from the cutting mechanism. Plug in and try again with fewer sheets. |
| Shredder stops during operation. | Overheat protection activated; Waste bin full. | Allow shredder to cool down for 20-30 minutes. Empty the waste bin. |
8. Specifications
- Model: LX25 (4300401)
- Shred Type: Cross-Cut
- Security Level: P-4
- Sheet Capacity: 6 sheets per pass
- Particle Size: 5/32" x 1-1/4"
- Shreds: Paper, staples, small paper clips, plastic credit cards
- Bin Capacity: 3 gallons
- Dimensions (H x W x D): 14.2 x 8.7 x 12.2 inches
- Weight: 9.28 pounds
- Continuous Run Time: Up to 3 minutes
- Cool Down Period: Approximately 20-30 minutes after continuous use
9. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Fellowes website. You may also contact Fellowes customer service directly for assistance with your LX25 Paper Shredder.
