Introduction
Thank you for choosing the JBL Clip 4 Waterproof Wireless Bluetooth Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity.
This bundle includes two JBL Clip 4 speakers, allowing for a versatile audio experience.
What's in the Box
- 2 x JBL Clip 4 Speakers
- 2 x USB-C Cables
- 1 x Quick Start Guide (not included in this digital manual)
- 1 x Safety Sheet (not included in this digital manual)
This image displays two JBL Clip 4 speakers. Each speaker is oval-shaped, covered in black fabric, and features a prominent JBL logo. A blue metallic carabiner clip is integrated at the top, with a red accent on the clip's hinge. Control buttons for volume and play/pause are visible on the front surface.
Setup
1. Charging the Speakers
Before first use, fully charge your JBL Clip 4 speakers. Each speaker is equipped with a built-in rechargeable Lithium-ion battery.
- Locate the USB-C charging port on the side of the speaker.
- Connect one end of the provided USB-C cable to the speaker's charging port.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer's USB port.
- The LED indicator will show charging status. It will turn off once fully charged.
2. Powering On/Off
- To power on, press the power button located on the speaker. The power indicator light will illuminate.
- To power off, press and hold the power button until the power indicator light turns off.
3. Bluetooth Pairing
The JBL Clip 4 uses Bluetooth for wireless audio streaming. It can connect to smartphones, tablets, and laptops.
- Power on your JBL Clip 4 speaker.
- Press the Bluetooth button on the speaker. The Bluetooth indicator light will flash, indicating it is in pairing mode.
- On your device (smartphone, tablet, laptop), go to the Bluetooth settings.
- Select "JBL Clip 4" from the list of available devices.
- Once connected, the Bluetooth indicator light will remain solid.
- Repeat this process for the second speaker if you wish to use them individually with different devices, or refer to JBL's official documentation for stereo pairing instructions if supported (not explicitly mentioned in provided data).
The effective Bluetooth range is approximately 10 meters (33 feet).
Operating the Speakers
Controls
The JBL Clip 4 features intuitive touch controls on its front surface:
- Volume Up (+): Press to increase volume.
- Volume Down (-): Press to decrease volume.
- Play/Pause (Triangle): Press once to play or pause audio.
- Skip Track (Triangle): Double-press to skip to the next track.
Carabiner Use
The integrated carabiner allows for easy portability. You can clip the speaker to bags, belts, or buckles, making it suitable for outdoor activities and travel.
Waterproof and Dustproof Features
The JBL Clip 4 is rated IP67 waterproof and dustproof. This means it can be submerged in up to 1 meter of water for up to 30 minutes and is protected against dust ingress. Ensure the charging port cover is securely closed before exposing the speaker to water or dust.
Battery Life
The speaker provides up to 10 hours of playtime on a single charge, depending on volume level and audio content.
Maintenance
Cleaning
- To clean the fabric surface, gently wipe with a soft, damp cloth.
- Do not use abrasive cleaners or solvents, as these can damage the speaker's finish and fabric.
- After exposure to water, ensure the speaker is completely dry before charging.
Storage
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery | Charge the speaker using the provided USB-C cable. |
| No sound | Volume too low; Not paired; Device issue | Increase speaker and device volume. Ensure speaker is paired correctly. Check audio output settings on your device. |
| Bluetooth pairing fails | Speaker not in pairing mode; Device too far; Interference | Ensure speaker is in pairing mode (flashing Bluetooth LED). Move device closer to speaker (within 10m). Turn off other Bluetooth devices. Try unpairing and re-pairing. |
| Charging issue | Faulty cable/adapter; Port obstruction | Try a different USB-C cable or power adapter. Check the charging port for debris. |
Specifications
| Model Name | CP4-BUN (JBL Clip 4) |
| Brand | JBL |
| Speaker Type | Portable Bluetooth Speaker |
| Connectivity Technology | Bluetooth, USB-C (for charging) |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Power Source | Battery Powered (1 Lithium Ion battery required per speaker) |
| Battery Life | Up to 10 hours (varies by volume and content) |
| Water Resistance Level | Waterproof (IP67) |
| Dust Resistance | Dustproof (IP67) |
| Control Method | Touch buttons |
| Audio Output Mode | Stereo (when two speakers are used individually with separate devices, or if stereo pairing is supported by JBL) |
| Product Dimensions (each speaker) | 2"D x 4"W x 3"H (approximately) |
| Item Weight (each speaker) | 0.53 Pounds (approx. 8.5 ounces) |
| Material | Fabric |
| Included Components | 2x Speakers, 2x USB Cables |
| UPC | 697333830420 |
Warranty Information
The JBL Clip 4 speakers come with a Limited Warranty. For detailed information regarding warranty terms, conditions, and registration, please visit the official JBL website or refer to the warranty card included with your product.
Keep your proof of purchase for warranty claims.
Support
For further assistance, technical support, or frequently asked questions, please visit the official JBL support website:
You may also contact JBL customer service directly through the contact information provided on their website.
