1. Introduction
Thank you for choosing the atomberg Ikano 1200mm BLDC Ceiling Fan. This fan is designed for energy efficiency and high air delivery, featuring a remote control and LED indicators. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
Figure 1: atomberg Ikano 1200mm BLDC Ceiling Fan (Gloss Black)
Figure 2: BLDC Motor with ATOMsense Algorithm
2. Safety Information
Always follow basic safety precautions when installing, operating, and maintaining electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Ensure the power supply is disconnected before installation or maintenance.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Mount the fan securely to a ceiling joist or a structure capable of supporting the fan's weight.
- Ensure fan blades are at least 2.3 meters (7.5 feet) from the floor and 0.5 meters (1.6 feet) from any wall or obstruction.
- Do not insert objects into the path of the rotating blades.
- Keep children away from the fan during operation.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 Blade set
- 1 Remote control
- 1 Motor box
- 2 Canopies
- 1 Downrod
- 1 Shackle kit
- Warranty card
4. Setup and Installation
Professional installation is recommended for the atomberg Ikano ceiling fan. You can arrange for doorstep installation through Urban Company or directly via Atomberg customer support.
Figure 3: Easy Installation Options
Installation Steps (Overview):
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling structure.
- Downrod and Motor Assembly: Attach the downrod to the motor and route electrical wires.
- Wiring: Connect the fan's electrical wires to the household wiring. Ensure correct polarity.
- Canopy Installation: Slide the canopies up to cover the wiring and mounting bracket.
- Blade Attachment: Securely attach the fan blades to the motor housing.
- Power On: Restore power and test fan operation.
For detailed instructions, please refer to the installation guide provided in the fan packaging or contact Atomberg customer support.
5. Operating Instructions
The atomberg Ikano fan is operated using the included Smart IR Remote. The remote allows control from up to 20 feet without pairing.
Figure 4: Smart IR Remote Control
Remote Control Functions:
- Power On/Off: Press the red power button to turn the fan on or off.
- Speed Control: Use buttons 1-5 to adjust fan speed. The fan has 6 speed levels.
- Boost Mode: Activates maximum speed for quick cooling.
- Timer Mode: Set the fan to turn off automatically after a specified duration.
- Sleep Mode: Gradually decreases fan speed every two hours for comfortable sleep.
- LED Lights: Controls the integrated LED indicators.
The fan maintains consistent speed even during voltage fluctuations between 165V-285V.
Figure 5: Power Consumption by Speed
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your atomberg Ikano fan.
- Cleaning: Dust the fan blades and motor housing regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Blade Inspection: Periodically check that all blade screws are tight. Loose blades can cause wobbling and noise.
- Motor Lubrication: The BLDC motor is designed for maintenance-free operation and does not require lubrication.
- Electrical Connections: Ensure all electrical connections remain secure. If you notice any loose wiring, contact a qualified technician.
Always disconnect power to the fan before performing any cleaning or maintenance.
7. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply; Remote battery low; Loose wiring. | Check circuit breaker; Replace remote batteries; Verify wiring connections. |
| Fan wobbles | Loose blades or mounting; Unbalanced blades. | Tighten all screws; Ensure blades are balanced (refer to installation guide). |
| Remote not responding | Remote battery low; Obstruction between remote and fan sensor. | Replace remote batteries; Ensure clear line of sight to fan. |
| Fan makes unusual noise | Loose components; Motor issue. | Check and tighten all screws; If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Atomberg customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | atomberg |
| Model Name | Ikano |
| Colour | Gloss Black |
| Electric Fan Design | Ceiling Fan |
| Power Source | Corded Electric |
| Product Dimensions (D x W x H) | 42.5D x 28.5W x 21.5H Centimeters |
| Special Features | LED Light, Timer |
| Controller Type | Remote Control |
| Number Of Speeds | 6 |
| Noise Level | 57 Decibels |
| Wattage | 28 Watts |
| Number of Blades | 3 |
| Air Flow Capacity | 230 Cubic Meters Per Minute |
| Speed | 365 RPM |
| Voltage | 140 Volts (Operating range 165V-285V) |
| Material Type | Aluminium |
| Blade Length | 48 Inches (1200mm) |
| Item Weight | 4 Kilograms |
Figure 6: Understanding Fan Sweep Size
Figure 7: Energy Efficiency of BLDC Motor
9. Warranty and Support
Warranty Information:
The atomberg Ikano ceiling fan comes with a standard two-year warranty. An additional one-year warranty can be obtained by registering your purchase on the official Atomberg website, totaling 3 years of onsite warranty.
Figure 8: Warranty and Service Network
Customer Support:
For any queries, technical assistance, or warranty claims, please contact Atomberg customer care:
- Email: support@atomberg.com
- Phone: 08448449442
Manufacturer Address: Atomberg Technologies Pvt Ltd, Mind Space Shelters LLP/ Vithai Developers LLP, Gat No. 51-59, Village Bhamboli, Chakan, Pune, Maharashtra-410507.