Introduction
The Lifepro Lumicure Pro is a portable light therapy device designed for targeted application. It utilizes a combination of red, blue, and near-infrared (NIR) light wavelengths to support various wellness applications. This manual provides essential information for the safe and effective use of your device.
Safety Information
WARNING: Always read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.
- Eye Protection: Do not look directly into the light source. Always wear the provided protective eyewear during use to prevent potential eye strain or damage.
- Medical Conditions: Consult with a healthcare professional before use if you have any medical conditions, are pregnant, or are taking medications that may increase light sensitivity.
- Skin Sensitivity: Perform a patch test on a small area of skin before full use to check for any adverse reactions. Discontinue use if irritation occurs.
- Children and Pets: Keep the device out of reach of children and pets.
- Water Exposure: This device is not water-resistant. Avoid contact with water or other liquids.
- Heat: The device may become warm during extended use. Avoid prolonged contact with a single skin area to prevent discomfort.
- Damaged Device: Do not use the device if it appears damaged or is not functioning correctly. Contact customer support for assistance.
Package Contents
Verify that all items are present in your package:
- Lifepro Lumicure Pro Light Therapy Torch
- Transport Bag
- Torch Pouch
- Rechargeable Battery (Nonstandard Battery)
- Charging Cable
- Protective Eyewear
- User Manual (this document)
Product Overview
The Lifepro Lumicure Pro is a compact, handheld light therapy device featuring a dual LED design. It offers multiple light options to suit various needs.
Key Features:
- Dual LED Design: Combines red and near-infrared light in a compact device.
- Multiple Light Options: Includes red (660nm), blue (420nm), and near-infrared (900nm) modes with a pulse setting.
- Focused LED Output: Provides steady light using key wavelengths for targeted application.
- Easy to Use: Simple, handheld design for convenient everyday use.
- Portable Size: Lightweight and easy to carry, making it suitable for travel.
Setup
1. Battery Installation
- Unscrew the tail cap of the Lumicure Pro device.
- Insert the provided rechargeable battery with the positive (+) end facing towards the light head.
- Securely screw the tail cap back onto the device.
2. Initial Charge
Before first use, fully charge the device using the provided charging cable. Connect the cable to the device and a suitable USB power source. The indicator light will show charging status (refer to device for specific indicator behavior).
Operating Instructions
1. Power On/Off
Press and hold the power button located on the side of the device for approximately 2 seconds to turn the device on or off.
2. Mode Selection
Once powered on, short press the power button to cycle through the available light modes:
- Red Light Mode (660nm): Visible red light.
- Blue Light Mode (420nm): Visible blue light.
- Near-Infrared (NIR) Mode (900nm): Invisible light, often combined with red light.
- Pulse Mode: Cycles through the light modes with a pulsing effect.
3. Application
Ensure you are wearing the provided protective eyewear before beginning treatment.
- Hold the device approximately 1-3 inches (2.5-7.5 cm) from the skin surface of the target area.
- Apply the light for 3-5 minutes per area. Do not exceed 10 minutes per area per session.
- Move the device slowly over the area or hold it stationary, depending on your preference and the area being treated.
- Use 1-3 times per day, with at least 4 hours between sessions on the same area.
Maintenance
Cleaning
Wipe the device with a soft, damp cloth after each use. Do not use abrasive cleaners or immerse the device in water.
Storage
Store the device in its transport bag or pouch in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is not inserted correctly or is depleted. | Ensure battery is inserted with correct polarity. Charge the battery fully. |
| Some lights are not working or flicker. | Internal electronic fault or low battery. | Ensure the battery is fully charged. If the issue persists, contact customer support. |
| Device gets too hot. | Prolonged use on one area. | Reduce session duration or move the device more frequently. Allow the device to cool down between uses. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LP-LMCRP |
| Dimensions | 124D x 25W x 20H millimeters (approx. 12.4 x 2.54 x 1 cm) |
| Item Weight | 0.3 Pounds (approx. 136 grams) |
| Power Source | Battery Powered |
| Battery Type | Lithium Ion (1 Nonstandard Battery required) |
| Battery Life | 6 Hours (approximate) |
| Runtime | 10 Hours (approximate) |
| Voltage | 3.7 Volts |
| Wattage | 5 watts |
| Light Source Type | LED |
| Number of Light Sources | 2 (LED arrays) |
| Wavelengths | 420nm (Blue), 660nm (Red), 900nm (Near-Infrared) |
| Material | Iron (Anodized Finish) |
| Country of Origin | China |
Warranty and Support
The Lifepro Lumicure Pro Red Light Therapy Device comes with a Lifetime Support warranty. For any questions, concerns, or warranty claims, please contact Lifepro customer support. Refer to the product packaging or the official Lifepro website for the most current contact information.