Product Overview
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your HOMCOM Set of 2 Bedside Tables with Drawer and Shelf. Designed for versatility, these tables can function as nightstands in the bedroom or as side tables in the living room, offering convenient storage and a stylish addition to your home decor.
Key Features
- Set of Two: This elegant nightstand set blends seamlessly with various decor styles. It also works effectively as side tables in the living room for books or beverages.
- Spacious Storage: Each side table features a slide-out drawer, an open shelf, and a flat top surface to help keep your home organized.
- Resistant Structure: Constructed from particleboard with a melamine coating, providing a smooth and protected finish.
- Wooden Legs: Angled wooden legs are designed to enhance stability and balance.
- Accent Nightstand Dimensions: 19.75"L x 15.25"D x 20"H. Weight Capacity: 33lbs (overall), 11lbs (shelf), 11lbs (drawer). Assembly required.
Product Images










Product Videos
Safety Information
Warning: This product requires assembly. Use caution when handling to avoid pinch points, especially around the drawer and shelf. Always follow the assembly instructions carefully. To prevent tipping, secure the unit to a wall using the provided anti-tipping hardware, especially in homes with children or pets.
Setup Instructions
Before beginning assembly, ensure all parts and hardware are present by comparing them against the included parts list. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and identify each piece using the provided diagram and hardware list.
- Assemble the Frame: Attach the side panels to the top and bottom panels using the designated screws and connectors. Ensure all connections are snug but do not overtighten.
- Install Drawer Glides: Secure the drawer glides to the interior side panels of the table frame according to the instructions.
- Assemble the Drawer: Construct the drawer box, then attach the drawer face and handle. Insert the drawer into the installed glides.
- Attach Legs: Securely fasten the wooden legs to the bottom of the table.
- Install Anti-Tipping Hardware: For safety, attach the anti-tipping strap to the back of the unit and then to a wall stud, following the specific instructions provided with the hardware.
- Final Check: Verify that all screws are tightened, and the unit is stable.
Operating Instructions
The HOMCOM bedside table is designed for simple and functional use.
- Using the Drawer: Gently pull the drawer handle to open and push to close. Avoid forcing the drawer, especially if it feels stiff. Ensure items are placed evenly to prevent imbalance.
- Using the Open Shelf: The open shelf provides easy access storage for books, magazines, or decorative items. Ensure items do not protrude excessively to avoid accidental knocks.
- Top Surface: Use the flat top surface for lamps, alarm clocks, or other personal items. Do not exceed the recommended weight capacity of 33 lbs.
Maintenance
Proper care will extend the life and appearance of your bedside table.
- Cleaning: Wipe Clean. Use a soft, damp cloth for general cleaning. Avoid abrasive cleaners or harsh chemicals, as these can damage the melamine coating.
- Spills: Immediately wipe up any spills to prevent staining or damage to the surface.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.
- Heat and Moisture: Do not place hot items directly on the surface. Use coasters or protective pads. Keep the table away from excessive moisture.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your HOMCOM bedside table, refer to the following common solutions:
- Wobbly Table: Ensure all leg attachments and frame screws are securely tightened. Check that the table is on a level surface. Adjust leg levelers if applicable.
- Drawer Sticking/Not Closing Smoothly: Check for any obstructions inside the drawer or along the glides. Ensure the drawer glides are properly aligned and free of debris. Lubricate glides with a silicone-based spray if needed.
- Missing Parts: If any parts were missing upon delivery, contact customer support immediately with your product model number and a description of the missing items.
- Surface Damage: For minor scratches, furniture repair pens or touch-up kits can be used. For significant damage, contact customer support for advice.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Number | CA831-372V010231 |
| Colour | White |
| Product Dimensions | 39D x 50W x 51H Centimetres (19.75"L x 15.25"D x 20"H) |
| Material | Engineered Wood |
| Special Features | Scratch Resistant, Space Saving, Storage |
| Item Weight | 17 kg (37.5 Pounds) |
| Maximum Weight Recommendation | 14.97 kg (33 lbs overall, 11 lbs shelf, 11 lbs drawer) |
| Frame Material | Engineered Wood |
| Top Material Type | Engineered Wood |
| Product Care Instructions | Wipe Clean |
| Recommended Uses | Displaying, Storage |
| Shape | Rectangular |
| Manufacturer | Aosom Canada |
| Date First Available | May 25 2022 |
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please contact the manufacturer, Aosom Canada. Keep your purchase receipt and product model number (CA831-372V010231) handy when contacting support.
Manufacturer: Aosom Canada
Place of Business: Markham, Ontario, CA
Telephone: 1-416-792-6088