Introduction
This manual provides instructions for the installation, operation, and maintenance of your VIANIS 3-Head Outdoor Lamp Post Light Fixture. This hard-wired outdoor lighting solution features a built-in dusk to dawn sensor, durable aluminum construction, and tempered glass for reliable performance in various outdoor conditions.
Safety Information
- Always turn off power at the circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician if you are not familiar with electrical wiring.
- Ensure all connections are secure and properly insulated.
- Do not exceed the maximum wattage specified for bulbs (3 x 100W E26).
- This product is designed for outdoor use and is waterproof and weather-resistant.
Package Contents
Verify that all components are present before beginning installation.
- Lamp Head Assembly (3 heads)
- Top Column
- Middle Column
- Bottom Column
- Post Base
- Mounting Hardware (Anchor Bolts, Cap Nuts, Machine Screws)
- Template Card for Positioning
- Supply Wire (pre-installed, 5-10 inches out from base)
Image showing the disassembled components of the lamp post, including the base, column sections, and the three-head lamp assembly.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 58.4L x 58.4W x 224H Centimetres (23 x 23 x 88 inches) |
| Weight | 9.07 kg (20 lbs) |
| Material | 100% Aluminum with Tempered Glass |
| Finish | Black Matte, Powder Coated |
| Power Source | Corded Electric, Hardwired |
| Voltage | 120 Volts |
| Bulb Base | E26 (Bulbs not included) |
| Max Wattage per Bulb | 100 watts |
| Special Features | Dusk to Dawn Sensor, Waterproof, Anti-Rust |
| Installation Type | Pole Mount, Hardwired |
| Certifications | UL Listed |
UL Listed certification mark, indicating compliance with safety standards.
Setup and Installation
This lamp post requires hardwired installation into a concrete base. Ensure the power is OFF at the circuit breaker before proceeding.
- Prepare the Base: Ensure you have a stable concrete base for mounting. The product includes a template card for accurate positioning of anchor bolts, which should be 7.68 inches apart. The concrete base should be at least 24-36 inches deep.
- Mount the Post Base: Secure the post base to the concrete using the provided anchor bolts and cap nuts. The supply wire should extend 5-10 inches out from the base.
- Assemble the Column: Thread the bottom column onto the post base, then the middle column, and finally the top column. Secure with machine screws as indicated in the diagram.
- Install the Lamp Head Assembly: Attach the lamp head assembly to the top column.
- Wiring: Connect the supply wire from the lamp post to your main power supply. Follow local electrical codes. Ensure all connections are tight and properly insulated.
- Install Bulbs: Insert three E26 base bulbs (max 100W each, not included) into the lamp sockets.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Detailed diagram illustrating the assembly steps and concrete base requirements for the lamp post.
An image of the fully assembled lamp post installed in an outdoor garden setting.
Operating Instructions
This lamp post features a built-in dusk to dawn sensor for automatic operation.
- Automatic On/Off: The integrated high-sensitivity sensor detects ambient light levels. The light fixture will automatically turn on at dusk when it gets dark and turn off at dawn when it becomes light.
- Manual Override: There is no manual override switch for the dusk to dawn sensor. The operation is fully automatic based on light detection.
Diagram illustrating the automatic on/off function of the dusk to dawn sensor, showing the light turning off during the day and on at night.
Maintenance
- Cleaning: Periodically clean the tempered glass panels and aluminum frame with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: Ensure power is OFF at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before handling. Use E26 base bulbs with a maximum wattage of 100W.
- Inspection: Regularly inspect the wiring and connections for any signs of wear or damage. Ensure the mounting remains secure.
- Weather Resistance: The fixture is designed to be waterproof and anti-rust. However, extreme weather conditions may require additional inspection.
The lamp post standing in a snowy outdoor setting, demonstrating its weather-resistant design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | 1. Power is off. 2. Faulty bulb(s). 3. Sensor obstructed or malfunctioning. 4. Wiring issue. | 1. Check circuit breaker and wall switch. 2. Replace bulb(s). 3. Ensure sensor is clear of obstructions. If still not working, contact support. 4. Consult a qualified electrician to check wiring. |
| Light stays on during the day. | 1. Sensor obstructed or covered. 2. Sensor malfunctioning. | 1. Ensure sensor is not covered by debris, leaves, or other objects. 2. If the issue persists, contact support. |
| Light flickers or dims. | 1. Loose bulb. 2. Incompatible bulb. 3. Wiring issue. | 1. Tighten bulb(s). 2. Ensure bulbs are E26 base, max 100W. 3. Consult a qualified electrician to check wiring. |
Warranty and Support
The VIANIS 3-Head Outdoor Lamp Post Light Fixture comes with a 3-year limited warranty. For warranty claims or technical support, please contact VIANIS customer service.
Manufacturer: VIANIS
Model Number: st-ting-l
For further assistance, please refer to the contact information provided with your purchase or visit the official VIANIS website.
Image of a badge indicating a 3-year warranty.