Introduction
The Portronics Toad 23 Wireless Optical Mouse is designed for seamless and comfortable navigation. Featuring 2.4GHz wireless connectivity and adjustable DPI, it offers precise control for various computing tasks. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Image: The Portronics Toad 23 Wireless Optical Mouse, showcasing its sleek black design.
Setup and Installation
Follow these steps to set up your Portronics Toad 23 Wireless Optical Mouse:
- Insert Battery: The mouse requires one AA battery (not included). Open the battery compartment located on the underside of the mouse. Insert the AA battery, ensuring correct polarity (+/-).
- Locate USB Nano Dongle: The tiny USB Nano Dongle is stored inside the battery compartment for convenience during transport. Carefully remove it.
- Connect Dongle: Plug the USB Nano Dongle into an available USB port on your computer (laptop or desktop).
- Automatic Connection: The mouse is designed for plug-and-play functionality. No software or driver installation is needed. The mouse will automatically connect to your computer system within a few seconds.
- Power On: Ensure the mouse is switched on using the power switch, usually located on the underside.
Image: Underside of the mouse showing the battery compartment and the USB Nano Dongle storage slot.
Image: The Portronics Toad 23 mouse next to a laptop with its USB Nano Dongle plugged into a USB port, illustrating 2.4 GHz wireless connectivity.
Once connected, you can enjoy a wireless range of up to 10 meters.
Operating Instructions
The Portronics Toad 23 mouse features a 4-button design for enhanced functionality and an ergonomic shape for comfortable use.
Image: Diagram of the Portronics Toad 23 mouse, labeling the Left Button, Right Button, Scroll Wheel, and DPI Switch Button.
- Left Button: Standard click function for selecting items, opening files, etc.
- Right Button: Accesses contextual menus and additional options.
- Scroll Wheel: Used for vertical scrolling through documents and web pages. It also functions as a third click button.
- DPI Switch Button: Located behind the scroll wheel, this button allows you to adjust the mouse sensitivity (DPI - Dots Per Inch). Press the button to cycle through available DPI settings (e.g., 800, 1000, 1200, 1600 DPI) to match your preference and task requirements.
Image: Close-up of the mouse showing the DPI switch button and an arc indicating adjustable DPI settings from 800 to 1600.
The ergonomic design ensures comfortable use for extended periods, suitable for both left and right-handed users.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. Avoid using abrasive cleaners or solvents. For the optical sensor, use a cotton swab lightly dampened with isopropyl alcohol if necessary, ensuring no liquid enters the mouse.
- Battery Replacement: When the mouse performance degrades or it stops responding, it is likely time to replace the AA battery. Follow the steps in the "Setup and Installation" section to replace the battery.
- Dongle Storage: When not in use or during travel, store the USB Nano Dongle inside the mouse's battery compartment to prevent loss.
- Durability: The Portronics Toad 23 is built for durability, with a lifespan of over 30 lakh clicks for its buttons.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low or dead battery; Dongle not properly connected; Mouse not powered on; Interference. | Replace the AA battery. Ensure the USB Nano Dongle is firmly plugged into a working USB port. Check the power switch on the mouse. Move the mouse closer to the dongle or away from other wireless devices. |
| Erratic cursor movement | Dirty optical sensor; Unsuitable surface; Interference. | Clean the optical sensor on the underside of the mouse. Use the mouse on a clean, non-reflective, opaque surface or a mouse pad. Reduce interference from other 2.4GHz devices. |
| DPI adjustment not working | Button not pressed correctly; Software conflict (rare). | Ensure you are pressing the DPI switch button firmly. Restart your computer. |
| Short battery life | Frequent use; Battery quality; Mouse not turned off when idle. | Use high-quality alkaline batteries. Turn off the mouse when not in use for extended periods to conserve battery life. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Portronics |
| Model Name | Toad 23 |
| Item Model Number | POR-1610 |
| Connectivity Technology | 2.4GHz Wireless (USB Nano Dongle) |
| Movement Detection Technology | Optical |
| Adjustable DPI | Yes (Multiple levels, e.g., 800, 1000, 1200, 1600) |
| Buttons | 4 (Left, Right, Scroll Wheel/Middle, DPI Switch) |
| Form Factor | Ambidextrous |
| Power Source | 1 x AA Battery (not included) |
| Average Battery Life | Up to 12 Months (depending on usage) |
| Product Dimensions | 12 x 8 x 0.1 cm |
| Item Weight | 75 g |
| Operating System Compatibility | Linux, Windows 7 and above |
| Included Components | 1N Mouse |
Warranty and Support
Portronics products are designed for reliability. For warranty information, customer care, or technical support, please use the following resources:
- Customer Care Portal: For instant access to warranty and customer care services, please visit the official Portronics support portal: https://linktr.ee/portronicsdigital
- Email Support: help@portronics.com
- Phone Support: +91 9555-245-245
- Manufacturer Address: Portronics Digital Pvt Ltd, First Floor Property No D 8 Upper Basement Sector 8 Noida Uttar Pradesh 201301, India.
Image: An overview of key features including battery requirement, connectivity, DPI, power saving, and a QR code for warranty and customer care access.
