SEALY Electric Blanket King Size KTHB-ATVS-K User Manual

Introduction

This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of your SEALY Electric Blanket. Please read all instructions carefully before use and retain this manual for future reference.

Image: The SEALY King Size Electric Blanket in beige, folded with its dual controllers visible.

Safety Information

Your SEALY Electric Blanket is ETL & FCC certified, ensuring lower electromagnetic radiation. It features insulated heating wire that monitors real-time temperature and prevents overheating, providing a safe and comfortable experience. The soft heating wire is manufactured with advanced processes for even heat distribution.

• Always ensure the blanket is used with the correct type of controller as indicated by the caution sticker near the connector.
• Do not use if the blanket is wet.
• Do not dry clean or bleach the blanket.
• Disconnect the controller and power cable before washing.

Image: Diagram illustrating the safety and energy-saving features, including overheat protection and even heat distribution.

Setup

1. Unpack the Blanket: Carefully remove the electric blanket and its components from the packaging.
2. Position the Blanket: Lay the electric blanket flat on your bed, ensuring it is spread evenly without any folds or creases. The connectors for the controllers should be positioned near the bottom of the bed for easy access.
3. Connect the Controllers: Locate the connectors on the blanket. Align the arrows on the blanket's connector and the controller's module. Firmly plug in the controller until it securely locks. For King size blankets, there are two independent controllers, one for each side.
4. Plug into Power Outlet: Connect the power cord from the controller to a standard electrical outlet. Ensure the power cord (6 ft) and controller cord (10.5 ft) have sufficient length to reach the outlet without strain.

Operating Instructions

The SEALY Electric Blanket features dual digital controllers for personalized comfort and ease of use.

1. Power On/Off: Press the ON/OFF power button on the controller to turn the blanket on or off.
2. Adjust Heat Settings: Use the '+' and '-' buttons under 'HEAT' to select your desired heat level. There are 10 heat settings available, ranging from 87°F to 126°F. The built-in continuous sensing technology will monitor and adjust the temperature to maintain your selected heat level.
3. Set Auto Shut-Off Timer: Use the '+' and '-' buttons under 'TIME' to set the auto shut-off timer. You can choose a duration from 1 to 12 hours. This feature ensures safer use and peace of mind.
4. Dual Control (King Size): King size blankets include two controllers that can be adjusted independently. This allows each user to personalize their heat zone according to their preference.

Image: A detailed view of the digital controller, highlighting the 10 heat settings, 1-12 hour auto shut-off, and quick on-off button.

Image: An illustration of a King size electric blanket on a bed, demonstrating the two independent heat zones controlled by separate units.

Maintenance

Proper care ensures the longevity and performance of your electric blanket.

1. Disconnect Power: Before washing, always disconnect the controller(s) and power cable(s) from the blanket.
2. Machine Wash: The blanket is machine washable. Use a gentle cycle with slow agitation and low spin speed.
3. Drying: Do not use a machine dryer. Air dry the blanket completely before reconnecting the controllers and using it.
4. Avoid Harsh Treatments: Do NOT dry clean, DO NOT bleach, and do not iron the blanket.
5. Storage: Store the blanket in a cool, dry place when not in use.

Image: A person placing the electric blanket into a washing machine, with an inset showing the detachable power connection.

Troubleshooting

If you encounter issues with your electric blanket, please refer to the following common solutions:

• Blanket Not Heating: Ensure all connections between the blanket, controller, and power outlet are secure. Check if the power outlet is functional.
• Uneven Heating: Verify that the blanket is spread flat on the bed without any folds or bunching, which can impede even heat distribution.
• Controller Display Not Lit: The controller display may dim after a few seconds to save energy. Press any button to reactivate the display.
• Automatic Shut-off: The blanket has an adjustable auto shut-off timer (1-12 hours). If the blanket turns off unexpectedly, check the timer setting.
• Insufficient Heat: Ensure the heat setting is appropriate for your desired warmth. The blanket offers 10 heat levels.

Specifications

Warranty

The SEALY Electric Blanket comes with a 5-Year Warranty. Please retain your proof of purchase for warranty claims.

Support

For any questions or assistance regarding your SEALY Electric Blanket, please contact the manufacturer, KATA. It is their honor to provide the best support for you to maintain a healthy and balanced life.