Product Overview
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your FORGING MOUNT Heavy Duty Long Arm TV Wall Mount, Model 9452-B. This full-motion TV mount is designed to securely hold most 50-90 inch screens, supporting weights up to 198 lbs (90 kg), and features dual articulating arms for extended reach and flexible viewing angles.
Image: Overview of the FORGING MOUNT Heavy Duty Long Arm TV Wall Mount, showing the main bracket, articulating arms, and TV mounting plates, along with included accessories like a bubble level and cable ties.
Setup and Installation
Proper installation is crucial for the safety and stability of your television. Please read all instructions carefully before beginning. It is recommended to have at least two people for installation due to the weight and size of the mount and television.
Pre-Installation Checks:
- TV Size and Weight: Ensure your TV is between 50-90 inches and weighs no more than 198 lbs (90 kg).
- VESA Compatibility: Verify your TV's VESA pattern is within the range of Min 200x100 to Max 600x400 mm.
- Wall Type: This mount is compatible with wood studs (16-24 inch spacing), solid concrete walls, and brick walls. DO NOT MOUNT ON DRYWALL ALONE.
- Cable Outlet Check: Ensure the TV mount will not block any cable outlets on the back of your TV.
Image: Illustration demonstrating how to measure the horizontal and vertical VESA mounting holes on the back of a television.
Image: Visual guide indicating suitable wall types for installation, including wood studs with 16-24 inch spacing, solid concrete, and brick, with a warning against mounting on drywall only.
Image: Diagram illustrating the importance of checking for potential cable outlet blockage on the TV's rear panel by the mounting bracket.
Installation Steps:
- Attach TV Plates: Secure the vertical TV plates to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure they are firmly attached and level.
- Install Wall Plate: Locate and mark the stud centers on your wall. Use the provided drilling template and bubble level to mark pilot holes. Drill the pilot holes and securely fasten the wall plate to the wall using the lag screws. For concrete or brick walls, use the appropriate anchors.
- Hang TV to Wall Plate: Carefully lift the television with the attached TV plates and hook them onto the wall plate. Ensure the TV is securely seated on the mount.
Image: A visual representation of the simplified three-step installation process: attaching the TV plate, installing the wall plate, and hanging the TV onto the wall plate.
Operating Instructions
Your FORGING MOUNT TV wall mount offers full motion capabilities to optimize your viewing experience from various positions within your room.
Adjusting the Mount:
- Extension: The dual articulating arms allow the TV to extend up to 42.9 inches (109 cm) from the wall, providing significant flexibility for viewing from different areas, such as a kitchen or bedroom. It retracts to 2.76 inches (7 cm) from the wall when not extended.
- Swivel: The mount allows for a swivel range of ±90° (180° total), enabling you to turn your TV left or right to achieve the perfect viewing angle from almost anywhere in the room.
- Tilt: Adjust the tilt angle from +5° to -12° to reduce glare from lights or windows and achieve optimal viewing comfort.
- Level Adjustment: The mount features a ±3° level adjustment to ensure your TV is perfectly horizontal after installation.
Image: Illustration demonstrating the mount's ability to extend up to 43 inches from the wall for flexible viewing and retract to a compact position.
Image: Visual representation of the mount's flexible full-motion capabilities, including a 180-degree swivel and tilt adjustment.
Always adjust the TV slowly and carefully. Avoid sudden movements or excessive force.
Maintenance
Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Periodic Inspection: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments may cause fasteners to loosen.
- Movement Check: Test the swivel, tilt, and extension mechanisms to ensure they move smoothly. If any stiffness is noted, a small amount of silicone-based lubricant can be applied to moving joints, avoiding contact with electrical components.
Troubleshooting
If you encounter issues with your TV wall mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level. | Mount not perfectly level during installation, or minor shifting. | Use the ±3° level adjustment feature on the mount to correct the angle. Re-check wall plate level if necessary. |
| Mount feels unstable or wobbly. | Loose fasteners, incorrect installation, or exceeding weight capacity. | Immediately remove TV. Re-check all lag screws securing the wall plate to the wall and all bolts connecting the TV to the mount. Ensure installation followed instructions for your wall type. Verify TV weight is within limits. If issues persist, consult a professional. |
| Difficulty moving the articulating arms. | Joints are stiff or dirty. | Clean the joints and apply a small amount of silicone-based lubricant if necessary. Ensure no cables are obstructing movement. |
| TV not fitting the mount. | Incorrect VESA pattern or TV size/weight. | Double-check your TV's VESA pattern and weight against the mount's specifications (Min 200x100, Max 600x400, Max 198 lbs). This mount is designed for 50-90 inch TVs. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | FORGING MOUNT |
| Model Number | 9452-B |
| Compatible TV Sizes | 50 - 90 Inches |
| Maximum Load Capacity | 198 lbs (90 kg) |
| VESA Compatibility | Min 200x100mm to Max 600x400mm |
| Extension from Wall | 2.76 inches (retracted) to 42.9 inches (extended) |
| Swivel Angle | ±90° (180° total) |
| Tilt Angle | +5° to -12° |
| Level Adjustment | ±3° |
| Material | Alloy Steel |
| Product Dimensions | 43 x 26 x 16 inches (approximate, extended) |
| Item Weight | 23 pounds |
Warranty and Support
FORGING MOUNT products are manufactured with quality and customer satisfaction in mind. For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official FORGING MOUNT website. Protection plans may also be available for extended coverage.
For direct assistance, please contact FORGING MOUNT customer service through the contact information provided on their official channels.