1. Introduction
Thank you for choosing PChero LED Flameless Taper Candles. These candles are designed to provide the warm ambiance of traditional candles without the risks associated with open flames, smoke, or dripping wax. Featuring realistic 3D flickering flames and a convenient remote control with timer functions, these battery-operated candlesticks are ideal for various decorative purposes in your home or for special events.
Image 1.1: PChero LED Flameless Taper Candles with Remote Control.
2. Safety Information
These flameless candles offer a safe alternative to traditional candles. Please observe the following safety guidelines:
- No Open Flame: As these are LED candles, there is no actual flame, eliminating fire hazards.
- No Smoke or Dripping Wax: Enjoy clean ambiance without smoke residue or wax spills.
- Battery Safety: Use only recommended AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for extended periods to prevent leakage.
- Indoor Use: These candles are designed for indoor use and are not waterproof. Avoid exposure to water or high humidity.
Image 2.1: Flameless candles provide safety benefits by eliminating fire, smoke, matches, and dripping wax.
3. Package Contents
Your PChero LED Flameless Taper Candles package includes:
- 6 x Ivory Real-Wax Taper Candles (AAA Batteries NOT Included)
- 1 x Remote Control (Button Battery INCLUDED)
4. Specifications
| Feature | Description |
|---|---|
| Candle Dimensions | Diameter 0.78" x Height 6.4" (2cm x 16.5cm) |
| Material | Real Wax Shell, Plastic Base |
| Light Source | LED with 3D Flickering Flame |
| Power Source (Candle) | 1 x AAA Battery (per candle, not included) |
| Power Source (Remote) | 1 x CR2 Battery (included) |
| Battery Life | Approx. 120 hours of continuous lighting |
| Control Method | Remote Control, Manual Bottom Switch |
| Special Features | 3D Flickering Flame, Real Wax Exterior, Remote Timer (2/4/6/8H), Dimmer, Steady/Flicker Mode |
5. Setup
5.1. Battery Installation (Candles)
- Gently twist the bottom cap of each taper candle counter-clockwise to open the battery compartment.
- Insert one (1) AAA alkaline battery into each candle, ensuring the positive (+) and negative (-) terminals are correctly aligned.
- Twist the bottom cap clockwise to securely close the battery compartment.
- To activate the candle, press the black button located on the bottom of the candle. Press again to turn off.
Image 5.1: The bottom of the candle reveals the battery compartment and power switch.
5.2. Battery Activation (Remote Control)
The remote control comes with a pre-installed CR2 button battery. Before first use, remove the clear plastic tab from the battery compartment at the bottom of the remote to activate the battery.
Video 5.1: This video demonstrates the features of the PChero Real Wax LED Taper Candles, including battery installation and remote control operation.
6. Operating Instructions
Once batteries are installed and activated, you can control your candles using the remote control. Ensure the candles are switched ON via their bottom button before using the remote.
6.1. Remote Control Functions
Image 6.1: The remote control for PChero LED Flameless Taper Candles, detailing its various functions.
- ON/OFF: Press the green 'ON' button to turn all candles on. Press the red 'OFF' button to turn all candles off.
- Timer: Select a timer setting (2H, 4H, 6H, 8H). The candles will remain lit for the selected duration and then automatically turn off. They will then turn on again at the same time the next day.
- Mode:
- Candle: Activates the realistic 3D flickering flame effect.
- Light: Provides a steady, non-flickering light.
- Dimmer: Use the '+' button to increase brightness and the '-' button to decrease brightness.
Image 6.2: The timer function allows candles to automatically turn on and off daily.
Image 6.3: The dimmable feature allows custom glow adjustment from dim to bright.
Video 6.1: This video provides a detailed overview of the Ivory LED Tapers, highlighting their 3D flicker, remote control, and timer functions for holiday use.
7. Maintenance
- Battery Replacement: Replace AAA batteries in candles and the CR2 battery in the remote when light output diminishes or the remote becomes unresponsive.
- Cleaning: Wipe the candles with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Storage: Store candles in a cool, dry place away from direct sunlight when not in use. Remove batteries before long-term storage.
8. Troubleshooting
- Candles not turning on:
- Ensure the bottom switch on each candle is in the 'ON' position.
- Check if batteries are inserted correctly with proper polarity.
- Replace old or depleted AAA batteries with new ones.
- Remote control not working:
- Ensure the plastic tab has been removed from the remote's battery compartment.
- Point the remote directly at the candles.
- Replace the CR2 button battery in the remote control.
- Short battery life:
- Use high-grade alkaline batteries for optimal performance.
- Avoid continuous use of the brightest setting, as this consumes more power.
- Utilize the timer function to conserve battery life.
9. Warranty and Support
For any questions, concerns, or support regarding your PChero LED Flameless Taper Candles, please contact PChero customer service through the retailer's platform or visit the official PChero store online. Please retain your purchase receipt for warranty purposes.