ASHATA 3D Hologram Fan Instruction Manual

Introduction

The ASHATA 3D Hologram Fan is a cutting-edge holographic projection device designed to display vivid 3D images and videos without borders or backgrounds, creating a floating visual effect. Equipped with 224 professional HD LED beads, it offers an 800x480P resolution for clear visuals in various environments. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your 3D Hologram Fan.

What's in the Box

Please verify that all components are present before proceeding with installation.

• 1 x 3D Hologram Fan
• 2 x Screws
• 2 x Screw Sleeve
• 1 x Adapter
• 1 x Memory Card (16GB)
• 1 x Manual

Setup

Physical Installation

The 3D Hologram Fan is designed for various display scenarios. Ensure the installation location is secure and allows for proper air circulation around the device. Use the provided screws and sleeves for mounting. Due to the exposed nature of the fan blades and internal components, consider installing the device in a location where it is protected from physical impact or accidental contact, especially in public areas.

Power Connection

Connect the provided power adapter to the fan and then to a suitable power outlet. The fan will begin to operate immediately upon power connection.

Content Management and Connectivity

The 3D Hologram Fan supports multiple control methods including remote control, PC control, and mobile app control. It is compatible with Windows (7 and 10), Android, and iOS operating systems.

• Memory Card: The included 16GB memory card comes pre-loaded with gobo editing software for Windows 7 and Windows 10. You can transfer video and image files to this card for display.
• WiFi Connection: The fan emits its own WiFi signal, typically named "3D_42CM_********". To manage content via a smartphone or PC, connect your device directly to the fan's WiFi network.
• Mobile App: Utilize the dedicated mobile application (e.g., "3D Circle" on iOS) to connect to the fan via its WiFi. From the app, you can select from built-in images, upload your own files, and even project normal photos.

Operating Instructions

Displaying Content

The fan supports common video, animation, and image displays. For optimal visual effect, content with black backgrounds is recommended as it enhances the illusion of a floating image. The device's 224 LED beads and high-speed motor work in conjunction to create clear and stable holographic projections.

Applications

The 3D Hologram Fan is suitable for a variety of industries and scenarios, including restaurants, malls, supermarkets, clothing stores, science museums, jewelry shops, and shoe stores, providing an eye-catching display for products or information.

Official Product Video

Video: This video demonstrates the 3D holographic projection capabilities of the ASHATA fan, showcasing various animated objects and figures appearing to float in mid-air. It highlights the visual clarity and dynamic nature of the display.

Maintenance

To ensure the longevity and optimal performance of your ASHATA 3D Hologram Fan, consider the following maintenance guidelines:

• Protection: The fan's LED blades and internal components are exposed. It is highly recommended to install the device in a location where it is protected from physical impact, dust, and moisture. Consider constructing a protective enclosure or placing it in a secure, elevated position.
• Temperature: After approximately 30 minutes of continuous operation, the charger and motor of the fan may become warm. This is normal. Ensure adequate ventilation around the device to prevent overheating.
• Cleaning: Gently wipe the fan blades and housing with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials that could damage the LEDs or surface.

Troubleshooting

If you encounter issues with your ASHATA 3D Hologram Fan, please refer to the following common problems and solutions:

• Software/App Not Working: Ensure you are connected to the fan's direct WiFi signal (e.g., "3D_42CM_********") and not your home or office WiFi. Some users have reported issues with app compatibility or installation; ensure your operating system is supported (Windows 7/10, Android, iOS) and try reinstalling the app.
• No Holographic Image/Fan Not Spinning: Check that the power adapter is securely connected to both the fan and the power outlet. Ensure there are no obstructions preventing the fan blades from rotating freely.
• Image Quality Issues (Flickering, Blurry): Verify that the content being displayed has a black background for optimal clarity. Ensure the fan blades are clean and free from dust or debris.
• Connectivity Problems: If your device cannot connect to the fan's WiFi, try restarting both the fan and your connecting device (smartphone/PC). Ensure your device's WiFi is enabled and it is within range of the fan.
• Physical Damage: The device is delicate. If the fan stops working after a physical impact, it may indicate internal damage, such as to the motherboard. Such damage may not be user-repairable.

Specifications

Warranty and Support

Specific warranty information for this product is not provided in the available data. For any support inquiries, technical assistance, or warranty claims, please contact ASHATA customer service or visit the official ASHATA store on Amazon:

Visit the ASHATA Store