Introduction
The VTech VS112 Cordless Phone System is designed to provide a versatile and secure communication experience for your home. This system integrates traditional landline functionality with modern features such as Bluetooth Connect to Cell and an advanced Smart Call Blocker. This manual will guide you through the setup, operation, and maintenance of your new phone system.
Key Features
- Smart Call Blocker: Block up to 1,000 numbers, filter robocalls, and screen unknown callers.
- Bluetooth Connect to Cell: Make and receive cellular calls using your cordless handsets. Pair up to two cell phones or one cell phone and one Bluetooth headset.
- Digital Answering System: Records up to 22 minutes of messages with a voice guide for easy setup.
- Large 2-inch Screen & Lighted Keypad: High-contrast text and enlarged font for easy readability and dialing in low-light conditions.
- Full-Duplex Speakerphone: Allows natural, two-way conversations on the handset.
- Visual Ringer: A light on the handset flashes for incoming calls, useful in noisy environments or for those with hearing impairment.
- Expandable System: Supports up to 5 handsets (VS112-0 or VS112-07 models).
What's in the Box
Verify that your package contains all the items listed below:
- Base unit
- Cordless handset
- AC adaptor
- Battery pack
- Telephone line cord
- Wall mount bracket
- Quick start guide
Image: The VTech VS112 cordless phone system, showing the handset docked in its base unit.
Setup
1. Battery Installation
- Open the battery compartment cover on the back of the cordless handset.
- Connect the battery pack plug securely into the jack inside the compartment.
- Place the battery pack with the label facing up and tuck the wires neatly.
- Close the battery compartment cover.
- Place the handset in the charger or base unit to charge for at least 10 hours before first use. The CHARGE light on the handset will illuminate.
2. Base Unit Connection
- Plug the small end of the AC adaptor into the power jack on the back of the telephone base.
- Plug the large end of the AC adaptor into a wall outlet not controlled by a wall switch.
- Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base.
- Plug the other end of the telephone line cord into a telephone wall jack.
Operating Instructions
Making and Receiving Calls
- To make a call: Press HOME/FLASH or CELL, then dial the number.
- To answer a call: Press any dialing key (0-9, #, *) or HOME/FLASH or CELL.
- To end a call: Press OFF/CANCEL or place the handset in the base/charger.
Digital Answering System
The integrated digital answering system records messages when you are unable to answer calls. It has a recording capacity of up to 22 minutes.
Image: Close-up of the VTech VS112 base unit showing the digital answering system controls and LED message counter.
- Turn On/Off: Press ANS ON/OFF on the base unit.
- Play Messages: Press PLAY/STOP on the base unit.
- Skip/Repeat: Use the SKIP or REPEAT buttons on the base unit during playback.
Smart Call Blocker
This feature helps to filter unwanted calls. You can block up to 1,000 numbers permanently.
Image: Close-up of the VTech VS112 handset keypad, highlighting the 'CALL BLOCK' button for one-touch blocking.
- Block a call during ringing: Press CALL BLOCK on the handset.
- Block a call from Caller ID history: Navigate to the desired number in Caller ID history, then press CALL BLOCK.
- Screening Robocalls: Set the system to ask callers to press the pound key.
- Screening Unknown Callers: Set the system to ask callers to record their names.
Image: The VTech VS112 handset display showing a directory interface, indicating the capacity for 1,000 blocked numbers.
Connect to Cell
Pair your cellular phone(s) with the VS112 system to make and receive cell calls through your cordless handsets.
Image: Illustration showing the VTech VS112 phone system wirelessly connected to two smartphones, indicating its 'Connect to Cell' capability.
- Pairing: Follow the instructions in the quick start guide to pair up to two Bluetooth-enabled devices.
- Making Cell Calls: Press CELL on the handset, then dial the number.
- Accessing Voice Assistants: Access Siri or Google Now from the cordless handsets even if your smartphone is in another room.
Intercom
Use the intercom feature to communicate between handsets within your system.
Image: Two VTech VS112 handsets facing each other with arrows indicating two-way communication, representing the intercom feature.
- To initiate an intercom call: Press INT on the handset, then select the desired handset number.
Speakerphone
The handset features a full-duplex speakerphone for hands-free conversations.
Image: A woman using the VTech VS112 handset's speakerphone feature while chopping vegetables in a kitchen, demonstrating hands-free use.
- To activate/deactivate: Press SPEAKER during a call.
Visual Ringer
A light on top of the handset flashes to signal an incoming call, providing a visual alert.
Image: A close-up view of the top of the VTech VS112 handset, showing the red light indicator for the visual ringer.
Volume Adjustment
Adjust the incoming call volume on both the handset and the base unit.
Image: The VTech VS112 handset and base unit, with circles highlighting the volume control buttons on both components.
- Handset Volume: Press VOLUME during a call.
- Base Unit Volume: Use the VOL + / - buttons on the base unit.
Caller ID/Call Waiting
The system stores up to 50 names and numbers in its Caller ID history.
Image: A close-up of the VTech VS112 handset display showing an incoming call with caller ID information.
Display and Keypad
The handset features a large 2-inch screen with high-contrast text and a lighted keypad for ease of use.
Image: A close-up of the VTech VS112 handset, emphasizing its large, backlit display and clearly labeled buttons.
Maintenance
Cleaning and Care
- Clean the phone with a soft, damp cloth. Do not use cleaning sprays or harsh chemicals.
- Avoid placing the phone in direct sunlight or in areas with high humidity or extreme temperatures.
Battery Care
- To ensure optimal battery life, fully charge the handset for 10 hours before initial use.
- If the phone will not be used for an extended period, remove the battery from the handset.
Troubleshooting
If you experience difficulty with your phone, please try the suggestions below. For more detailed troubleshooting, refer to the full user manual or contact customer support.
| Problem | Solution |
|---|---|
| No dial tone | Ensure the telephone line cord is securely plugged into the base unit and the wall jack. Check if the AC adaptor is properly connected. |
| Handset does not charge | Ensure the handset is correctly placed in the base unit or charger. Clean the charging contacts on both the handset and base unit. Verify the AC adaptor is plugged in. |
| Cannot make/receive calls | Check if the phone line is active. Ensure the handset is registered to the base unit. If using Connect to Cell, verify Bluetooth connection to your mobile phone. |
| Poor audio quality | Move closer to the base unit. Check for interference from other electronic devices. Ensure the handset battery is fully charged. |
| Smart Call Blocker not working | Ensure the Smart Call Blocker feature is enabled and configured correctly in the phone settings. Check your blocked numbers list. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 4.7 x 4 x 7 inches |
| Item Weight | 1.12 pounds |
| Model Number | VS112 |
| Batteries | 1 Product Specific battery required (included) |
| Telephone Type | Cordless |
| Material | Plastic |
| Power Source | Battery Powered |
| Answering System Type | Digital |
| Color | Silver |
Warranty and Support
Customer Support
For technical assistance, product registration, or to purchase replacement parts, please visit the VTech website or contact VTech customer service. Contact information can typically be found in the quick start guide included with your product or on the official VTech support website.
Please retain your purchase receipt as proof of purchase for warranty purposes.
