YAOHUIMI A420220521452

YAOHUIMI Replacement Remote Control Instruction Manual

For Midea Arctic King Window Air Conditioners

Introduction

This manual provides instructions for the YAOHUIMI Replacement Remote Control, designed for use with various Midea and Arctic King window air conditioner models. This remote control offers direct functionality without the need for programming.

Product Overview

The replacement remote control is designed to operate your compatible Midea or Arctic King window air conditioner. It features an ergonomic design and clearly labeled buttons for various functions.

Front view of the YAOHUIMI replacement remote control

Figure 1: Front view of the YAOHUIMI replacement remote control, showing power, timer, temperature/timer adjustment, sleep, fan speed adjustment, cool, heat, fan only, mode, energy saver, auto fan, auto swing, and light buttons.

YAOHUIMI replacement remote control with included wall mount

Figure 2: The replacement remote control shown alongside its included wall mount case, providing a convenient storage solution.

Compatibility

This remote control is compatible with the following Midea and Arctic King window air conditioner models:

Note: This is not a universal remote control. If you are unsure about compatibility, please verify your air conditioner model number.

Setup

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover downwards to open it.
  3. Insert two (2) AAA 1.5V batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
  4. Slide the battery cover back into place until it clicks securely.

The remote control is ready for use immediately after battery installation; no programming is required.

Back view of the remote control showing the battery compartment

Figure 3: Rear view of the remote control, highlighting the battery compartment for AAA battery insertion.

Operating Instructions

Point the remote control directly at the air conditioner unit when operating. Ensure there are no obstructions between the remote and the unit.

Button Functions:

Remote control in use, pointing towards an air conditioner

Figure 4: Illustration of the remote control being used to operate a window air conditioner, demonstrating typical usage.

Maintenance

Battery Replacement

Replace batteries when the remote control's range decreases or it becomes unresponsive. Always replace both batteries simultaneously with new AAA 1.5V batteries. Do not mix old and new batteries or different types of batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.

Troubleshooting

Specifications

Model NumberA420220521452
Power Source2 x AAA 1.5V Batteries (not included)
CompatibilityMidea and Arctic King Window Air Conditioners (specific models listed in Compatibility section)
Special FeatureErgonomic Design, No Programming Required

Warranty and Support

For any questions or support regarding this replacement remote control, please contact the seller or manufacturer directly. Specific warranty information may vary; please refer to your purchase documentation for details.

Manufacturer: HUIMIKEJI

Brand: YAOHUIMI

Documents - YAOHUIMI – A420220521452

no relevant documents