1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BOBOVR M1 Plus Head Strap with Battery for Meta Quest 2. This accessory is designed to enhance comfort, provide stable support, and extend the battery life of your Meta Quest 2 VR headset.
2. Package Contents
Please verify that all items listed below are included in your package:
- Battery Head Strap (x1)
- B2 Battery Pack (x1)
- Replaceable Honeycomb Pad (x1)
- Thickened Top Strap (x1)
- PU Leather Pad (x1)
Image: Contents of the BOBOVR M1 Plus Head Strap package.
3. Features
- Enhanced Comfort: Features a flexible frame design and dual material pads (soft PU leather and breathable honeycomb) for improved head support and reduced facial pressure.
- Balanced Weight Distribution: The included B2 battery pack, weighing only 140g, helps balance the weight of the Quest 2, improving overall comfort during extended use.
- Hot-Swappable Battery System: The magnetic B2 battery pack (5200mAh) can be easily swapped and charged without removing the headset, significantly extending playtime.
- Adjustable Hinge: A 120-degree adjustable hinge allows for easy wearing and removal, and convenient lifting of the headset to view your surroundings.
- Durable Construction: Designed for stability and durability, suitable for active VR experiences.
Image: Key features of the BOBOVR M1 Plus Head Strap, including magnetic battery attachment and lightweight design.
Image: Comfort features of the head strap, highlighting the flexible frame and interchangeable pads.
Image: The head strap worn, demonstrating balanced weight and comfort with various pad options.
4. Setup and Installation
Follow these steps to install the BOBOVR M1 Plus Head Strap on your Meta Quest 2 headset:
- Step 1: Install the back of the head strap to the corresponding clip of the headband.
- Step 2: Place the M1 Plus fixing arm over the speaker structure on both sides of Quest 2.
- Step 3: Connect the top soft strap to the Quest 2 and adjust the length to suit your head.
Image: Step-by-step guide for installing the head strap.
Video: Demonstrates the installation process, including attaching the strap, adjusting for fit, and connecting the magnetic battery pack.
5. Operating Instructions
5.1 Adjusting the Head Strap
- Use the adjustment knob at the back of the strap to tighten or loosen the fit around your head.
- The flexible support structure is designed to conform to the curve of your head for optimal comfort.
- The 120-degree flip support allows you to easily lift the headset without fully removing it.
Video: Shows how to adjust the head strap for a comfortable and secure fit, including the 120-degree flip feature.
5.2 Using the Hot-Swappable Battery Pack
- Attach the B2 battery pack magnetically to the designated slot on the back of the head strap. Ensure it clicks securely into place.
- To charge the battery pack, detach it from the head strap and connect it via its USB-C port.
- For continuous play, you can hot-swap battery packs by replacing a depleted one with a fully charged one without interrupting your VR experience.
Video: Illustrates the magnetic attachment and hot-swapping of the B2 battery pack.
6. Maintenance
6.1 Cleaning the Pads
- The PU leather pad can be wiped clean with a damp cloth and mild soap.
- The honeycomb pad is designed for better airflow and can be easily cleaned with water and air-dried.
- Ensure pads are completely dry before reattaching them to the head strap.
Video: Shows how to remove and replace the head strap pads for cleaning or switching between types.
6.2 Battery Care
- Store the battery pack in a cool, dry place when not in use.
- Avoid exposing the battery to extreme temperatures.
- Charge the battery regularly to maintain its health, even if not used frequently.
7. Troubleshooting
If you encounter any issues with your BOBOVR M1 Plus Head Strap, please consider the following:
- Head strap feels loose: Ensure the adjustment knob is tightened sufficiently and the top strap is properly secured and adjusted.
- Battery not charging: Verify that the USB-C cable is securely connected to both the battery pack and a power source. Check the power indicator lights on the battery pack.
- Battery not powering Quest 2: Ensure the battery pack is correctly attached to the head strap and the power cable from the battery is plugged into the Quest 2.
For further assistance, please contact BOBOVR customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | BOBOVR |
| Model Number | M1 Plus |
| Compatible Devices | Meta Quest 2 |
| Battery Capacity | 5200mAh (B2 Battery Pack) |
| Connectivity Technology | USB Type C |
| Item Weight | 362 Grams |
| Special Feature | Hot swappable battery |
9. Warranty and Support
The BOBOVR M1 Plus Head Strap with Battery comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures product quality.
For warranty claims, technical support, or any questions regarding your product, please visit the official BOBOVR website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty services.
