Introduction
Thank you for choosing the AOGUERBE KT-D009 Magnetic Wireless Portable Charger. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.
Product Overview
The AOGUERBE KT-D009 is a 10000mAh magnetic wireless power bank designed for convenient charging of compatible devices, including iPhone 12, 13, and 14 series. It features both wireless and wired fast charging capabilities, a foldable stand, and an LED display for battery status.
Figure 1: AOGUERBE KT-D009 Magnetic Wireless Portable Charger magnetically attached to a compatible iPhone, illustrating wireless charging functionality.
Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not expose the device to extreme temperatures, direct sunlight, or liquids.
- Do not disassemble, modify, or attempt to repair the device.
- Keep out of reach of children.
- Use only certified charging cables and adapters.
- Avoid dropping or subjecting the device to strong impacts.
- Ensure proper ventilation during charging.
Figure 2: Internal safety mechanisms of the AOGUERBE KT-D009, including advanced temperature control, overcharge protection, foreign object detection, and over-voltage protection.
Setup
Initial Charging of the Power Bank
- Connect the provided USB-C cable to the USB-C port on the power bank.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included).
- The LED display will show the charging progress. Charge the power bank fully before first use.
Operating Instructions
Wireless Charging (Mag-Safe Compatible)
- Ensure your device is compatible with Mag-Safe or Qi wireless charging. For optimal magnetic attachment, use an iPhone 12/13/14 series device or a compatible Mag-Safe case.
- Press the power button on the power bank to activate wireless charging. The LED display may indicate wireless charging activity.
- Align your compatible device with the magnetic charging area on the power bank. The magnets will snap into place, and charging will begin automatically.
- The power bank features a foldable stand for convenient viewing while charging wirelessly.
Wired Charging (USB-C and USB-A)
- Connect your device to the USB-C or USB-A output port on the power bank using an appropriate charging cable.
- Charging will typically begin automatically. If not, press the power button on the power bank.
- The power bank supports fast charging via its USB-C (up to 20W) and USB-A (up to 22.5W PD) ports.
Checking Battery Level
Press the power button once to view the remaining battery percentage on the LED display.
Maintenance
- Clean the power bank with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Store the device in a cool, dry place away from direct sunlight and moisture.
- If not used for extended periods, charge the power bank at least once every three months to maintain battery health.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Device not charging wirelessly. |
|
| Device not charging via cable. |
|
| Power bank not charging. |
|
| Slow charging speed. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | KT-D009 |
| Battery Capacity | 10000 mAh |
| Battery Type | Lithium Polymer |
| Wireless Output | 5W / 7.5W / 10W / 15W |
| USB-C Output | Up to 20W |
| USB-A Output | Up to 22.5W (PD) |
| USB-C Input | Up to 20W |
| Dimensions | 16.5 x 9 x 2 cm |
| Weight | 230 g |
| Color | Charcoal Black |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact AOGUERBE customer service through their official website or the retailer where the product was purchased. Please have your model number (KT-D009) and purchase details ready.