Tribesigns F1783 70.9-inch Extra Long Console Table Instruction Manual

1. Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

• Weight Capacity: Do not exceed the maximum weight recommendation of 100 pounds (45 kg) for the tabletop and 50 pounds (22.5 kg) for the lower shelf. Overloading can cause structural failure and injury.
• Assembly: Always assemble according to the provided instructions. Ensure all parts are securely fastened before use. It is recommended that two people assemble this table due to its length and weight.
• Stability: Place the table on a flat, stable surface. Adjustable feet pads are included to help level the table on uneven floors.
• Environment: Keep the table away from direct heat sources, open flames, and excessive moisture to prevent warping, discoloration, or damage.
• Children and Pets: Do not allow children to climb on or play with the table. Keep small parts away from children and pets during assembly.

Failure to follow these safety guidelines may result in injury or damage to the product.

2. Package Contents

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer service.

• Tabletop (1)
• Lower Shelf (1)
• Metal Frame Legs (2 pairs)
• Connecting Bars (2)
• Adjustable Feet Pads (4)
• Hardware Pack (screws, bolts, Allen wrench)
• Assembly Instructions Manual (this document)

Image 2.1: Illustration of the table's construction, highlighting the 1.57-inch thick particle board, sturdy metal frame, and adjustable leg pads for stability.

3. Assembly Instructions

Assembly is estimated to take approximately 30 minutes with two people. All necessary hardware and tools are included.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
2. Attach Legs to Tabletop: Align the metal frame legs with the pre-drilled holes on the underside of the tabletop. Secure them using the provided screws and the Allen wrench. Do not overtighten initially.
3. Install Connecting Bars: Attach the two connecting bars between the leg frames, ensuring they are properly aligned. Fasten them with the designated hardware.
4. Place Lower Shelf: Position the lower shelf onto the designated supports on the metal frame. Secure it using the appropriate screws.
5. Tighten All Fasteners: Once all components are in place, gradually tighten all screws and bolts to ensure a secure and stable structure.
6. Attach Adjustable Feet Pads: Screw the adjustable feet pads into the bottom of each leg. Adjust them as needed to level the table on your floor.

Image 3.1: Detailed dimensions of the console table, useful for planning placement and assembly.

4. Operating Instructions

The Tribesigns F1783 console table is designed for versatile use in various indoor settings.

• Placement: This extra-long table is ideal for placement behind a sofa, in an entryway, hallway, or against a wall. Its narrow design allows it to fit in spaces where traditional tables might be too wide.
• Display Surface: Use the spacious tabletop to display decorative items such as lamps, photo frames, vases, or books.
• Storage: The lower shelf provides additional space for storage baskets, magazines, or other items, helping to keep your area organized.
• Functional Bar Table: When placed behind a sofa, the table can serve as a convenient bar or dining surface, especially when paired with bar stools.

Image 4.1: The console table positioned behind a sofa, showcasing its use as a display and storage unit.

Image 4.2: The long tabletop and lower shelf providing ample space for decoration and storage.

5. Maintenance

Proper care will help maintain the appearance and longevity of your console table.

• Cleaning: Wipe the table surfaces with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
• Spills: Immediately wipe up any spills with a dry cloth to prevent staining or water damage.
• Inspection: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
• Protection: Use coasters under drinks and placemats under hot items to protect the tabletop surface.

6. Troubleshooting

If you encounter any issues with your console table, refer to the following common solutions:

• Table is Wobbly:
  • Ensure all screws and bolts are fully tightened.
  • Adjust the leveling feet pads on the bottom of the legs to compensate for uneven floor surfaces.
• Parts Do Not Align During Assembly:
  • Loosen all fasteners slightly, adjust the parts into correct alignment, then retighten.
  • Double-check that you are using the correct parts for each step as indicated in the assembly diagram.
• Missing or Damaged Parts:
  • Carefully re-check all packaging materials to ensure no small parts were overlooked.
  • Contact Tribesigns customer service with your model number and a description of the missing or damaged part for assistance.

7. Specifications

8. Warranty and Support

Tribesigns provides an 18-month quality assurance guarantee for this product. If you experience any issues or have questions regarding assembly, parts, or product functionality, please do not hesitate to contact our customer service team.

Customer Service Contact:
For support, please visit the official Tribesigns website or refer to the contact information provided on your purchase receipt.