Introduction
Thank you for choosing the atolla 4-in-1 USB 3.0 SuperSpeed Card Reader. This device is designed to provide fast and efficient data transfer between various memory card formats and your computer. With its plug-and-play functionality and broad compatibility, it simplifies your digital workflow. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Figure 1: The atolla 4-in-1 USB 3.0 SuperSpeed Card Reader, showcasing its compact design and compatibility with multiple memory card types including SD, Micro SD, CF, and MS cards.
Setup Guide
1. Package Contents
- 1 x atolla 4-in-1 USB 3.0 SuperSpeed Card Reader
- 1 x User Manual (this document)
2. System Requirements
The atolla card reader is designed for wide compatibility. Ensure your system meets the following requirements:
- Operating System: Windows XP/Vista/7/8/8.1/10/11, macOS, Linux, Chrome OS.
- Available USB Port: USB 3.0 port recommended for SuperSpeed performance, but compatible with USB 2.0 ports (at USB 2.0 speeds).
Figure 2: The card reader is compatible with various operating systems and features LED indicators for activity and link status.
3. Connecting the Device
- Locate an available USB port on your computer (PC or laptop).
- Plug the USB 3.0 connector of the atolla card reader into the USB port.
- The device is plug-and-play, meaning no additional drivers are required for most operating systems. Your computer should automatically detect and install the necessary drivers.
- A blue LED indicator on the card reader will illuminate, indicating that the device is connected and active. A green LED indicates link status when a card is inserted and being accessed.
Operating Instructions
1. Inserting Memory Cards
The atolla card reader features four distinct card slots:
- SD Slot: For SD, SDHC, SDXC, Extreme I III SD, Ultra II SD, MMC, RS-MMC cards.
- Micro SD Slot: For Micro SD, TF, Micro SDXC, Micro SDHC, UHS-I cards.
- CF Slot: For CF I 3.0/4.0, Extreme I III CF, Ultra II CF, HS CF, XS-XS CF, CF Elite Pro, CF Pro, CF Pro II cards.
- MS Slot: For MS, MS PRO, MS PRO-HG, MS XC DUO cards.
Gently insert your memory card into the corresponding slot until it clicks into place. Ensure the card is inserted in the correct orientation to avoid damage.
Figure 3: Detailed view of the card reader's slots and compatible memory card formats.
2. Data Transfer
Once a memory card is inserted and recognized by your computer, it will appear as a removable drive. You can then:
- Read Data: Open the drive to access files on the memory card.
- Write Data: Drag and drop files from your computer to the memory card drive.
- Simultaneous Access: The atolla card reader supports reading and writing to all four card slots simultaneously, allowing for efficient multi-card operations without constant plugging and unplugging.
The USB 3.0 interface provides SuperSpeed data transfer rates of up to 5Gbps, which is significantly faster than USB 2.0 (up to 480Mbps).
Figure 4: High-speed data transfer capabilities of the atolla card reader.
Figure 5: Simultaneous access to four different memory cards, saving time and effort.
3. Safely Removing Memory Cards
To prevent data corruption, always safely eject the memory card from your operating system before physically removing it from the card reader. This can typically be done by right-clicking the drive icon in "My Computer" (Windows) or dragging the drive icon to the Trash (macOS) and selecting "Eject".
Maintenance
1. Cleaning
To maintain the performance and appearance of your card reader:
- Disconnect the device from your computer before cleaning.
- Wipe the exterior with a soft, dry, lint-free cloth.
- Do not use liquid cleaners, aerosols, or solvents, as they may damage the device.
- Avoid getting moisture into the card slots or USB connector.
2. Storage
When not in use, store the card reader in a cool, dry place, away from direct sunlight and extreme temperatures. Its compact size makes it easy to carry and store.
Figure 6: The compact design allows for easy portability.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Solution |
|---|---|
| Device not recognized by computer. |
|
| Memory card not detected. |
|
| Slow data transfer speed. |
|
| Blue/Green LED not lighting up. |
|
Product Specifications
| Brand | atolla |
| Model | CR01(42) |
| Part Number | CR01 |
| Manufacturer | Ruiwei Technology (Shenzhen) Co., LTD. |
| Hardware Interface | USB 3.0 Type-A |
| Data Transfer Speed | Up to 5 Gigabits Per Second (USB 3.0) |
| Compatible Operating Systems | Windows XP/Vista/7/8/8.1/10/11, macOS, Linux, Chrome OS |
| Compatible Devices | Personal Computer, Laptop |
| Supported Memory Card Types | SD, SDHC, SDXC, Micro SD, TF, Micro SDHC, Micro SDXC, CF I 3.0/4.0, MS, MS PRO, MS PRO-HG, MS XC DUO, and more. |
| Max Card Capacity | Up to 512GB |
| Special Features | Compact, Plug and Play, Lightweight, Simultaneous 4-card reading/writing |
| Color | Black |
| Dimensions (L x W x H) | 6.9 x 6.5 x 1.8 cm (2.7 x 2.5 x 0.7 inches) |
| Weight | 63 g (2.2 oz) |
| Batteries Required | No |
Warranty and Support
1. Warranty Information
atolla provides an 18-month hassle-free replacement warranty for this product from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
2. Customer Support
For any questions, technical assistance, or warranty claims, please contact atolla customer service. We are committed to providing lifetime customer service to ensure your satisfaction.
Please refer to the contact information provided on the product packaging or the official atolla website for the most up-to-date support channels.
