Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Funsicle SkimmerPlus 1,500 GPH 2-in-1 Filter Pump and Skimmer System. Please read all instructions carefully before use and retain this manual for future reference.
Safety Information
Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this product.
- Connect only to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not operate the pump if the power cord or plug is damaged.
- Keep children away from the pump and pool area during operation.
- Disconnect the pump from the power supply before performing any maintenance or cleaning.
- Ensure the pump is placed on a stable, level surface.
Product Overview
The Funsicle SkimmerPlus system is a multi-function 2-in-1 filter pump and skimmer designed to keep your above-ground pool water clean and clear. It combines effective skimming technology with ultra-fine filter paper to capture debris and purify pool water.
Image 1: The Funsicle SkimmerPlus 2-in-1 Filter Pump and Skimmer System, shown with a Type C filter cartridge. This system efficiently combines skimming and filtration for clear pool water.
Key Features:
- 2-in-1 Functionality: Combines a skimmer and filter pump in one unit.
- Powerful Filtration: 1,500 gallons per hour (GPH) water flow rate.
- Debris Removal: Skimmer basket continuously removes surface debris.
- Water Purification: Filter cartridge with ultra-fine filter paper purifies pool water.
- Easy Installation: Attaches to the pool's sidewall with included clamps.
- Compatibility: Fits all above-ground pools with outlet and inlet openings, including Funsicle Oasis and Activity Pools.
Image 2: Visual representation of the Funsicle SkimmerPlus highlighting its key benefits: compatibility with all above-ground pools, innovative filtration, and a powerful 1,500 GPH water flow.
Setup and Installation
Proper setup is crucial for optimal performance and safety. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the packing list are present.
- Positioning the Pump: Place the SkimmerPlus unit on a stable, level surface near your pool. Ensure it is close enough for the power cord to reach a GFCI-protected outlet without an extension cord.
- Attaching to Pool Sidewall:
- Identify the existing outlet and inlet openings on your above-ground pool.
- Attach the SkimmerPlus unit to the pool's sidewall using the provided clamps. Ensure a secure and watertight fit.
- Connect the 1.5-inch hose from the SkimmerPlus to the pool's inlet opening. Use hose clamps to secure connections.
Image 3: The Funsicle SkimmerPlus unit securely attached to the side of an above-ground pool, demonstrating the hose connection to the pool's inlet.
- Installing Filter Cartridge:
- Open the top cover of the SkimmerPlus unit.
- Insert the Type C filter cartridge into the designated compartment. Ensure it is seated correctly.
- Close the top cover securely.
- Filling the Pool: Ensure your pool is filled to the appropriate water level, covering the skimmer opening.
- Power Connection: Plug the GFCI power cord into a properly grounded and GFCI-protected electrical outlet.
Operating Instructions
Once installed, operating your SkimmerPlus is straightforward:
- Starting the Pump: After connecting to power, the pump will begin circulating water and filtering.
- Skimming Action: The skimmer opening will draw water from the surface, collecting floating debris into the skimmer basket.
- Filtration: Water then passes through the Type C filter cartridge, where fine particles are trapped.
- Clean Water Return: Purified water is returned to the pool through the inlet opening.
- Timer Function (if applicable): The pump may include a timer feature on its power cord. Refer to the timer's specific instructions to set desired operating hours. This allows for automated filtration cycles.
Image 4: The Funsicle SkimmerPlus actively circulating water, with clean, filtered water being returned to the pool, demonstrating its powerful flow.
Maintenance
Regular maintenance ensures the longevity and efficiency of your SkimmerPlus system:
- Emptying Skimmer Basket:
- Periodically check the skimmer basket for collected debris (leaves, insects, etc.).
- Disconnect the pump from power before opening the skimmer basket.
- Remove the basket, empty its contents, and rinse it clean.
- Replace the basket and secure the cover.
Image 5: A hand demonstrating the process of removing collected debris from the skimmer basket, an essential part of routine maintenance for the Funsicle SkimmerPlus.
- Replacing Filter Cartridge:
- The Type C filter cartridge should be replaced every 2 weeks for optimal filtration.
- Disconnect the pump from power.
- Open the top cover and remove the old filter cartridge.
- Insert a new Type C filter cartridge.
- Close the top cover securely.
Image 6: A close-up of the Type C filter cartridge, which is recommended for replacement every two weeks to maintain optimal water clarity and pump efficiency.
- Cleaning the Pump Housing: Wipe down the exterior of the pump with a damp cloth as needed to keep it clean.
- Winterization: Before freezing temperatures, disconnect the pump, drain all water, and store it in a dry, protected area.
Troubleshooting
If you encounter issues with your Funsicle SkimmerPlus, refer to the table below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not running | No power; GFCI tripped; Motor overheated | Check power connection; Reset GFCI; Allow motor to cool down. |
| Weak water flow | Clogged filter cartridge; Full skimmer basket; Air in system | Replace filter cartridge; Empty skimmer basket; Bleed air from system (refer to specific instructions for your pool type). |
| Water not clearing | Dirty filter; Insufficient run time; Chemical imbalance | Replace filter cartridge; Increase pump run time; Test and adjust pool chemicals. |
| Unusual noise from pump | Debris in impeller; Air in system; Worn bearings | Disconnect power and check for debris; Bleed air; Contact customer support if noise persists. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | P53FX1500 |
| Flow Rate | 1,500 GPH (Gallons Per Hour) |
| Power Source | AC/DC (with GFCI power cord) |
| Filter Type | Type C Cartridge |
| Product Dimensions (L x W x H) | 9.50 x 10.80 x 21.50 inches |
| Item Weight | 8.9 Pounds |
| Compatibility | All above-ground pools with outlet and inlet openings, Funsicle Oasis and Activity Pools |
| Manufacturer | Polygroup Pacific Limited |
| UPC | 195545003484 |
Warranty and Support
The Funsicle SkimmerPlus 1,500 GPH 2-in-1 Filter Pump and Skimmer System comes with a 1-year manufacturer warranty. For warranty claims, technical support, or replacement parts, please contact Funsicle customer service through their official website or the retailer where the product was purchased.
For additional resources, you may refer to the official User Manual (PDF).
