Funsicle P53FX100F

Funsicle SkimmerPlus 1000 GPH 2-in-1 Filter Pump and Skimmer System User Manual

Model: P53FX100F | Brand: Funsicle

Introduction

The Funsicle SkimmerPlus 1000 GPH 2-in-1 Filter Pump is designed to maintain crystal clear water in your above-ground swimming pool. This innovative system combines the functions of a skimmer and a filter pump into a single, efficient unit. It continuously removes debris from the water's surface and purifies the water using a filter cartridge and ultra-fine filter paper. The design allows for convenient attachment to the pool's sidewall, promoting safety by preventing tripping hazards. This filter pump is compatible with all Funsicle Activity and Oasis pools.

Important Safety Information

Read and understand all instructions before installing and using this product. Failure to follow these instructions could result in property damage, serious injury, or death. Keep this manual for future reference.

Package Contents

Verify that all components are present before beginning installation.

Funsicle SkimmerPlus pump unit with a Type C filter cartridge next to it.
Image: The Funsicle SkimmerPlus filter pump unit shown alongside a Type C filter cartridge, illustrating the main components included.

Setup and Installation

Follow these steps to properly install your Funsicle SkimmerPlus Filter Pump.

  1. Prepare the Pool: Ensure your above-ground pool has the necessary outlet and inlet openings for the pump. The pump is designed to attach to the pool's sidewall.
  2. Attach the Pump Unit: Securely attach the SkimmerPlus filter pump unit to the sidewall of your pool. Ensure it is firmly in place and level.
  3. Connect the Hose: Connect the provided 1.5-inch hose from the pump's outlet to the pool's water return inlet. Use the hose clamps to secure both ends of the hose tightly to prevent leaks.
  4. Install Filter Cartridge: Open the filter compartment on the pump unit and insert the Type C filter cartridge. Ensure it is seated correctly. Close the compartment securely.
  5. Fill the Pool: If not already filled, fill your pool to the recommended water level, ensuring the skimmer opening is submerged.
  6. Connect to Power: Plug the pump's power cord into a grounded electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for safety.
Funsicle SkimmerPlus pump installed on the side of an above-ground pool, with the hose connected to the water return.
Image: The SkimmerPlus filter pump unit correctly installed on the exterior sidewall of an above-ground swimming pool, showing the hose connection.
Close-up of a hand connecting the hose to the pump's outlet.
Image: A detailed view of the hose being connected to the pump's water outlet, highlighting the secure attachment process.

Operation

The Funsicle SkimmerPlus pump operates to continuously filter and skim your pool water.

Diagram illustrating the water flow through the Funsicle SkimmerPlus pump, showing dirty water entering, debris collected in the skimmer basket, water passing through the filter, and clean water returning to the pool.
Image: A schematic diagram detailing the filtration process of the SkimmerPlus pump, from debris intake to clean water output.
Close-up of water being returned to the pool through the pump's outlet, showing clear, aerated water.
Image: A close-up view of the filtered water being returned to the pool, indicating proper pump operation.

Maintenance

Regular maintenance is crucial for the optimal performance and longevity of your SkimmerPlus pump.

  1. Clean Skimmer Basket: Periodically check and empty the skimmer basket of collected debris. This prevents clogging and maintains efficient skimming.
  2. Replace Filter Cartridge: The Type C filter cartridge should be replaced every two weeks under normal usage conditions. More frequent replacement may be necessary with heavy use or high debris levels.
  3. Inspect Hoses and Connections: Regularly check hoses and connections for any signs of wear, cracks, or leaks. Tighten hose clamps if necessary.
  4. Clean Pump Exterior: Wipe down the exterior of the pump unit with a damp cloth to remove dirt and grime.
  5. Winterization: Before winter, disconnect the pump, drain all water from it, and store it in a dry, protected area away from freezing temperatures.
A hand removing the skimmer basket from the pump unit.
Image: Demonstrating the removal of the skimmer basket for cleaning, a key maintenance step.
A hand inserting a new Type C filter cartridge into the pump unit.
Image: Illustrating the process of inserting a fresh Type C filter cartridge into the pump, essential for effective filtration.

Troubleshooting

If you encounter issues with your Funsicle SkimmerPlus pump, refer to the following common problems and solutions.

ProblemPossible CauseSolution
Pump not runningNo power; tripped RCD; motor malfunctionCheck power connection; reset RCD; contact customer support if motor is faulty.
Low water flowClogged filter cartridge; full skimmer basket; air in system; kinked hoseClean or replace filter cartridge; empty skimmer basket; bleed air from system; straighten hose.
Water leaking from connectionsLoose hose clamps; damaged O-rings/gaskets; improper hose connectionTighten hose clamps; inspect and replace O-rings/gaskets if damaged; ensure hoses are properly seated.
Unusual noise from pumpDebris in impeller; pump running dry; worn bearingsDisconnect power and check impeller for debris; ensure pump is fully submerged; contact customer support for internal issues.

Specifications

FeatureDetail
BrandFunsicle
Model NumberP53FX100F
Water Flow Rate1000 Gallons Per Hour (GPH)
Maximum Flow Rate16.67 Gallons Per Minute
Filter Cartridge TypeType C
Power SourceAC/DC
Voltage230 Volts (AC)
MaterialPlastic
ColorWhite
Item Weight7.1 Pounds
Product Dimensions (L x W x H)20.5 x 10.75 x 9.5 inches
Specific UsesAbove-Ground Pool
UPC195545003477

Warranty and Support

The Funsicle SkimmerPlus Filter Pump comes with a 1-year manufacturer warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please refer to the official Funsicle customer support channels or visit their website. A detailed User Manual in PDF format is also available for download: Funsicle SkimmerPlus User Manual (PDF).

Related Documents - P53FX100F

Preview Funsicle Oasis Pool User Guide: Setup, Maintenance, and Safety
Comprehensive user guide for the Funsicle Oasis Pool, covering setup instructions, safety guidelines, maintenance tips, and winterizing procedures for optimal enjoyment and longevity.
Preview Funsicle SkimmerPlus Filter Pump User Guide
User guide for the Funsicle SkimmerPlus Filter Pump, detailing setup, operation, maintenance, and troubleshooting for clean pool water. Features include power specifications and parts list.
Preview Funsicle SkimmerPlus Filter Pump User Guide
Comprehensive user guide for the Funsicle SkimmerPlus Filter Pump, detailing setup, operation, maintenance, and troubleshooting for clean and enjoyable pool water.
Preview Funsicle Activity Pool User Guide: Setup, Safety, and Maintenance
Comprehensive user guide for the Funsicle Activity Pool, covering setup instructions, safety guidelines, maintenance tips, and parts information. Ensure safe and enjoyable outdoor play.
Preview Funsicle Activity Pool User Guide: Setup, Safety, and Maintenance
Comprehensive user guide for the Funsicle Activity Pool, covering setup, safety precautions, maintenance, storage, and troubleshooting. Learn how to safely enjoy your outdoor pool.
Preview Funsicle Oasis Pool User Guide
Comprehensive user guide for the Funsicle Oasis Pool, covering setup, safety, maintenance, and troubleshooting for a safe and enjoyable swimming experience.