Introduction
This manual provides instructions for the Timex x Stranger Things T80 Atlantis100 Camper digital watch. This special edition watch combines classic Timex functionality with unique elements inspired by the Netflix series Stranger Things.
Key features include a Stranger Things themed alarm sound, an Indiglo backlight that reveals a "Mind Flayer" silhouette, and a unique display at 3:00 AM/PM.
Image: Front view of the Timex x Stranger Things T80 Atlantis100 Camper digital watch, displaying the time and date.
Watch Controls
The watch features four primary buttons for operation:
- INDIGLO: Activates the Indiglo backlight. (Top left button)
- MODE: Cycles through different modes (Time, Alarm, Chronograph). (Bottom left button)
- ALARM ON/OFF: Toggles the alarm function. (Top right button)
- SET: Used to adjust settings within a mode. (Bottom right button)
Setup
Setting Time and Date
- Press the MODE button repeatedly until the time setting mode is displayed (usually indicated by flashing digits).
- Press the SET button to select the digit or setting you wish to adjust (e.g., hours, minutes, 12/24-hour format, year, month, day).
- Use the ALARM ON/OFF button to increase the value or cycle through options.
- Continue pressing SET and ALARM ON/OFF until all desired time and date settings are correct.
- Press the MODE button to exit the setting mode and return to the normal time display.
Setting the Alarm
- Press the MODE button until the alarm time is displayed.
- Press the SET button to begin adjusting the alarm time. The hour digits will flash.
- Use the ALARM ON/OFF button to set the desired hour.
- Press SET again to move to the minute digits, then use ALARM ON/OFF to set the desired minutes.
- Press MODE to save the alarm time.
- To activate or deactivate the alarm, press the ALARM ON/OFF button while in the alarm display mode. An alarm icon will appear or disappear on the screen.
Note: The alarm features a unique Stranger Things themed sound.
Operating Instructions
Using the Indiglo Backlight
Press the INDIGLO button (top left) to illuminate the watch face in low-light conditions. When activated, a silhouette of the "Mind Flayer" from Stranger Things will appear on the display.
Image: The watch display illuminated by Indiglo, revealing the Mind Flayer silhouette.
Special 3:00 AM/PM Display
This watch features a unique display at 3:00 AM and 3:00 PM. Depending on your watch's settings, the number "3" will be displayed in reverse during these times, adding to the Stranger Things theme.
Chronograph (Stopwatch) Function
- Press the MODE button until the chronograph (stopwatch) display appears (usually indicated by "00:00:00").
- Press the ALARM ON/OFF button to start the chronograph.
- Press the ALARM ON/OFF button again to pause the chronograph.
- To reset the chronograph, press the SET button while the chronograph is paused.
- Press MODE to exit the chronograph mode.
Maintenance
Cleaning Your Watch
To clean your watch, wipe it gently with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or seals.
Water Resistance
This watch is water resistant up to 100 meters (WR 100 METERS). This means it is suitable for swimming and snorkeling, but not for scuba diving. Do not press any buttons while the watch is submerged in water to prevent water ingress.
Battery Replacement
The watch uses a CR2016 cell battery. When the display dims or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Image: Close-up of the watch's stainless steel back, showing "CR2016 CELL" and "WR 100 METERS" markings.
Troubleshooting
- Watch not powering on or display is blank: The battery may be depleted. Refer to the "Battery Replacement" section and consider having the battery professionally replaced.
- Incorrect time or date: Enter the time setting mode and adjust the time and date as described in the "Setting Time and Date" section.
- Alarm not sounding: Ensure the alarm function is activated. Check for the alarm icon on the display. If not present, press the ALARM ON/OFF button to activate it. Verify the alarm time is set correctly.
- Buttons not responding: Ensure the watch is not in a locked mode (if applicable, though not specified for this model). If the issue persists, a battery replacement might be necessary, or professional service is recommended.
Specifications
| Model Number | TW2V51000 |
| Case Size | 40 x 40 mm (H 1.6 x W 1.6 inches) |
| Wrist Size | 14.5 x 21 cm (5.7 x 8.3 inches) |
| Water Resistance | 100 meters (WR 100 METERS) |
| Battery Type | CR2016 Cell |
| Manufacturer | TIMEX |
Warranty and Support
Your Timex watch is covered by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For further assistance, product registration, or to locate an authorized service center, please visit the official Timex website.
Official Timex Website: www.timex.com
