Introduction
This manual provides instructions for the QNIGLO Q136 Kids Walkie Talkies. These rechargeable two-way radios are designed for clear communication during outdoor activities, offering a fun and safe way for children to stay connected. Please read this manual thoroughly before using the product to ensure proper operation and longevity.
Package Contents
The QNIGLO Q136 Walkie Talkie set includes the following items:
- 4 x QNIGLO Kids Walkie Talkies (Model Q136)
- 4 x Adjustable Watch Straps
- 4 x USB Charging Cables
- 4 x Lanyards
- 1 x User Manual
Image: Four QNIGLO Q136 walkie talkies in different colors, along with USB charging cables, watch straps, and lanyards, illustrating the complete package contents.
Product Overview
Familiarize yourself with the main components and controls of your QNIGLO Q136 Walkie Talkie:
Image: A detailed diagram of the QNIGLO Q136 walkie talkie, highlighting key components such as the antenna, LED indicator, On/Off button, Plus/Minus buttons, Menu/Lock button, Call/Scan button, PTT (Push-to-Talk) button, Headphone port, Charging port, Speaker, and FM button.
- Antenna: For transmitting and receiving signals.
- LED Indicator: Shows power and charging status.
- On/Off Button: Powers the device on or off.
- Plus (+) / Minus (-) Buttons: Adjust volume, change channels, or navigate menu options.
- M/C (Menu/Lock) Button: Accesses the menu or locks/unlocks the device.
- Call/Scan Button: Initiates a call tone or scans for active channels.
- PTT (Push-to-Talk) Button: Press and hold to transmit your voice.
- Headphone Port: For connecting external headphones (not included).
- Charging Port: Micro-USB port for recharging the internal battery.
- Speaker: Outputs received audio.
- FM Button: Activates the FM radio function.
Setup
1. Charging the Walkie Talkies
Before first use, fully charge each walkie talkie. The devices feature a built-in rechargeable Lithium Polymer battery.
- Connect the provided USB charging cable to the charging port on the side of the walkie talkie.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer's USB port.
- The LED indicator will show the charging status. Once fully charged (typically 2-3 hours), the indicator will change or turn off.
- A full charge provides approximately 24 hours of talk time and 5 days of standby time.
Image: Two QNIGLO Q136 walkie talkies, one purple and one green, are shown connected to a wall charger via USB cables, demonstrating the charging process.
2. Powering On/Off
- To power on, press and hold the On/Off button until the screen lights up.
- To power off, press and hold the On/Off button until the screen turns off.
3. Wearing Options
The QNIGLO Q136 walkie talkies can be worn in two ways:
- Wrist Watch Style: Attach the walkie talkie to the adjustable watch strap and wear it on the wrist.
- Lanyard Style: Attach the walkie talkie to the lanyard and wear it around the neck.
Image: A child is shown wearing a green walkie talkie around their neck with a lanyard. Below, two walkie talkies (green and blue) are displayed with their respective wrist straps, illustrating the different wearing options.
Operating Instructions
1. Channel Setting
All walkie talkies in your group must be set to the same channel to communicate. The Q136 features 22 channels.
- Press the M/C (Menu) button once to enter the channel setting mode. The channel number on the display will flash.
- Use the Plus (+) or Minus (-) buttons to select your desired channel (1-22).
- Press the PTT button to confirm your selection and exit the menu.
Image: A close-up of the QNIGLO Q136 walkie talkie display showing "CH01" and instructions for channel setting, indicating the process of selecting a communication channel.
Video: This video demonstrates how to use the QNIGLO Q136 kids walkie talkies, including basic operation and channel setting.
2. Encryption Code Setting (Privacy Codes)
To reduce interference from other users on the same channel, you can set a privacy code (CTCSS/DCS). The Q136 supports 99 privacy codes.
- Press the M/C (Menu) button twice to enter the encryption code setting mode. The code number on the display will flash.
- Use the Plus (+) or Minus (-) buttons to select your desired code (01-99). "OF" indicates no code.
- Press the PTT button to confirm your selection and exit the menu.
- All walkie talkies in your group must use the same channel and encryption code to communicate.
3. Transmitting and Receiving
- To transmit your voice, press and hold the PTT (Push-to-Talk) button. Speak clearly into the microphone (located near the M/C button).
- Release the PTT button to stop transmitting and listen for a response.
- When receiving a signal, the speaker will output the incoming audio.
4. Call Tone
Press the Call/Scan button briefly to send a call tone to other walkie talkies on the same channel and code, alerting them to an incoming message.
5. VOX (Voice Operated Exchange)
The VOX function allows you to transmit without pressing the PTT button. When activated, the walkie talkie will automatically transmit when it detects your voice.
- Press the M/C (Menu) button three times to enter VOX setting mode.
- Use the Plus (+) or Minus (-) buttons to select the VOX sensitivity level (e.g., 1-3, with 3 being most sensitive) or turn VOX off.
- Press the PTT button to confirm and exit.
6. FM Radio Function
Your walkie talkie can also function as an FM radio.
- Press the FM button to activate the FM radio.
- Use the Plus (+) or Minus (-) buttons to change radio stations.
- Press the FM button again to exit FM radio mode.
Image: A close-up of the QNIGLO Q136 walkie talkie display showing "FM" and a frequency, indicating the device is in FM radio mode.
Maintenance
- Cleaning: Wipe the walkie talkies with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Recharge the batteries regularly, even if not in use, to maintain battery health. Avoid fully depleting the battery for extended periods.
- Storage: Store the walkie talkies in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: The devices are water-resistant (IP65 rated), meaning they can withstand splashes but should not be submerged in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery is depleted. | Charge the walkie talkie using the provided USB cable. |
| Cannot communicate with other walkie talkies | Different channels or privacy codes. | Ensure all walkie talkies are set to the same channel and privacy code. Refer to "Channel Setting" and "Encryption Code Setting" sections. |
| Poor sound quality or interference | Out of range, obstacles, or channel interference. | Move closer to the other user. Avoid large obstacles. Try changing to a different channel and privacy code. |
| PTT button stuck or unresponsive | Physical obstruction or internal issue. | Gently check for any debris around the button. If the issue persists, contact customer support. |
| Walkie talkie receives unwanted transmissions (e.g., from other users) | No privacy code set or common channel used. | Set a unique privacy code for your group. Change to a less congested channel. |
Specifications
- Brand: QNIGLO
- Model Number: Q136
- Number of Channels: 22
- Frequency Range: Up to 2 miles (3 km) in optimal conditions
- Battery: 1 Lithium Polymer battery (included)
- Battery Average Life: 24 hours (talk time)
- Water Resistance Level: Water Resistant (IP65)
- Connectivity Protocol: UHF Radio Frequency
- Special Features: Long Range, Shockproof, FM Radio, VOX
Video: This video provides an overview of the QNIGLO rechargeable walkie talkie watch for kids, highlighting its features and long-range capabilities.
Warranty and Support
QNIGLO offers a 2-year warranty on this product. For any issues or inquiries, please contact QNIGLO customer support. The product also comes with a 45-day money-back promise.
For customer support, please refer to the contact information provided with your purchase or visit the official QNIGLO website.