Amazon Basics 63763

Amazon Basics 14-Inch Round Propane Fire Pit

Model: 63763

Instruction Manual

1. Introduction

Thank you for choosing the Amazon Basics 14-Inch Round Propane Fire Pit. This portable tabletop fire pit is designed to provide ambiance and warmth to your outdoor living spaces. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

2. Important Safety Information

Fire Alert: Keep children away from the fire when the pit is in use. Always supervise the fire pit during operation. Ensure adequate ventilation and never use indoors. Keep flammable materials away from the unit. Do not move the fire pit while it is in operation or still hot. Allow the unit to cool completely before handling or storage.

3. Product Features

4. Package Contents

Your Amazon Basics 14-Inch Round Propane Fire Pit package includes:

5. Setup Instructions

  1. Unpack Components: Carefully remove all items from the packaging and ensure all parts listed in Section 4 are present.
  2. Position the Fire Pit: Place the fire pit unit on a stable, non-combustible surface. If using with a patio table, ensure the table has a minimum 2-inch umbrella hole.
  3. Install Propane Tank Bracket: Attach the propane tank bracket to the underside of the fire pit unit using the provided hardware. This bracket is designed to secure a 1-pound LP gas tank.
  4. Connect Propane Tank: Screw a 1-pound LP gas tank (not included) into the connection point on the underside of the fire pit. Ensure a tight, leak-free connection. The tank will hang discreetly beneath the table if mounted through an umbrella hole.
  5. Add Fire Glass: Carefully distribute the provided fire glass stones over the burner area within the fire pit. Ensure the burner is not completely covered to allow for proper flame distribution.
  6. Install Glass Wind Guard: Place the glass wind guard securely around the perimeter of the fire pit's burner area. This helps to protect the flame from wind and improve heat efficiency.
Propane fire pit mounted in a patio table umbrella hole

Figure 1: The fire pit's base is designed for secure mounting through a minimum 2-inch umbrella hole in a patio table.

Fire pit with decorative glass stones

Figure 2: The fire pit filled with clear glass stones, providing a clean and aesthetic flame display.

6. Operating Instructions

  1. Before Lighting: Ensure the fire pit is on a stable surface and away from any flammable materials. Check all gas connections for leaks.
  2. Lighting the Fire Pit: Locate the control knob on the side of the unit. Push and turn the knob counter-clockwise to the 'LOW' position while simultaneously pressing the igniter button. Hold for a few seconds until the flame ignites.
  3. Adjusting Flame Height: Once lit, rotate the control knob to adjust the flame height to your desired level (between 4 to 10 inches).
  4. Turning Off: To extinguish the flame, turn the control knob clockwise to the 'OFF' position. Ensure the flame is completely out before leaving the unit unattended.
Fire pit control knob for flame adjustment

Figure 3: Detail of the control knob, allowing for easy adjustment of the flame height.

Video 1: Official product video demonstrating the features and setup of Amazon Basics Gas Fire Pits, including the 14-inch round model.

7. Maintenance

8. Troubleshooting

9. Specifications

BrandAmazon Basics
Model Number63763
Product Dimensions14"D x 14"W x 8"H
Item Weight7.98 pounds (3.63 Kilograms)
MaterialStainless Steel
Finish TypePowder Coated
Fuel TypeLiquefied Petroleum Gas
BTU Output9,000 BTU
ColorDark Brown
CertificationCSA Certified

10. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics website. Keep your proof of purchase for any warranty claims.