Devoko Wood Lift Top Coffee Table (Model 13FW)

1. Introduction

Thank you for choosing the Devoko Wood Lift Top Coffee Table, Model 13FW. This versatile furniture piece is designed to enhance your living space with its functional lift-top mechanism, hidden storage compartment, and additional shelving. This manual provides essential information for safe assembly, proper operation, and effective maintenance to ensure the longevity and optimal performance of your coffee table.

Image 1.1: Devoko Wood Lift Top Coffee Table in a living room setting with the top closed.

2. Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand or sit on the coffee table.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Avoid placing excessively heavy items on the lift-top surface or inside the hidden compartment. The table surface when not lifted supports up to 200 lbs.
• Use caution when lifting or lowering the tabletop to avoid pinching fingers or hands.
• This product is intended for indoor use only.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Wood Desktop Panels
• Side Panels
• Bottom Panels
• Legs
• Lift-Top Mechanism (Gas Struts and Hinges)
• Hardware Pack (Screws, dowels, cam locks, etc.)
• Assembly Tool (e.g., Allen wrench)

4. Assembly Instructions

Assembly typically requires two people. Follow these general steps for assembly. Refer to the detailed diagram included in your package for specific part identification and placement.

1. Prepare Components: Unpack all components and lay them out on a soft, clean surface. Identify each part using the provided diagrams.
2. Assemble Base Frame: Attach the side panels to the bottom panel using the designated hardware (e.g., dowels and cam locks). Ensure all connections are snug.
3. Install Legs: Securely attach the four angled legs to the bottom of the assembled base frame using the provided screws.
4. Construct Storage Compartment: Assemble the internal dividers and shelves for the hidden compartment and open storage areas.
5. Attach Lift Mechanism: Carefully attach the hydraulic lift mechanism to the main table frame and the underside of the lift-top panel. Ensure correct orientation as per diagrams.
6. Secure Tabletop: Attach the lift-top panel to the lift mechanism. Test the lifting and lowering function to ensure smooth operation.
7. Final Checks: Verify all screws are tightened and the table is stable.

Image 4.1: Detail of the table's wood finish and angled legs, highlighting construction elements.

5. Operating Instructions

The Devoko Lift Top Coffee Table features a hydraulic lifting mechanism for convenient height adjustment.

5.1. Lifting the Tabletop

• Grasp the edge of the main tabletop firmly with both hands.
• Gently pull upwards. The hydraulic mechanism will assist in smoothly raising the tabletop to its extended position.
• Ensure the tabletop is fully extended and stable before placing items on it.

5.2. Lowering the Tabletop

• Clear any items from the lifted tabletop surface.
• Grasp the edge of the tabletop firmly with both hands.
• Apply gentle downward pressure. The hydraulic mechanism will allow the tabletop to slowly and smoothly descend back into its closed position.
• Ensure the tabletop is fully closed and flush with the rest of the table.

Image 5.1: The coffee table with its top lifted, providing an elevated surface for work or dining.

5.3. Using Storage Compartments

• The hidden compartment beneath the lift-top is accessible when the top is lifted. It is ideal for storing laptops, remote controls, and other items you wish to keep out of sight.
• The open shelves on the side provide additional space for magazines, books, or decorative items.

Image 5.2: An overhead view demonstrating the large storage capacity of the hidden compartment when the top is lifted.

6. Maintenance

6.1. Cleaning

• Wipe the table surfaces with a soft, damp cloth.
• Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the wood finish.
• Promptly clean up spills to prevent staining.

6.2. General Care

• Keep the table away from direct sunlight and extreme temperature changes to prevent warping or fading.
• Use coasters under drinks and placemats under hot items to protect the surface.
• Periodically check and re-tighten all hardware to maintain stability.

7. Troubleshooting

7.1. Tabletop is Hard to Lift or Lower

• Check Mechanism: Ensure no obstructions are interfering with the hydraulic lift mechanism.
• Lubrication: If the mechanism feels stiff, a small amount of silicone-based lubricant can be applied to the moving parts (avoid oil-based lubricants on wood).
• Even Pressure: Apply even pressure when lifting or lowering. Avoid pushing or pulling from only one side.

7.2. Table Feels Wobbly

• Tighten Hardware: Re-tighten all screws and bolts, especially those connecting the legs and frame.
• Level Surface: Ensure the table is placed on a flat, level surface. Use furniture pads under legs if necessary to compensate for uneven floors.
• Re-assembly Check: If wobbling persists, carefully review the assembly steps to ensure all parts are correctly installed.

8. Specifications

Image 8.1: Product dimensions and weight capacity diagram.

9. Warranty and Support

For warranty information, missing parts, or technical support, please contact Devoko customer service directly. Refer to your purchase documentation for specific contact details or visit the official Devoko website.

Customer Service: Please refer to the contact information provided at the point of purchase or on the manufacturer's official website.