CrossBeats CB-SLIDE

CrossBeats Slide Bluetooth Truly Wireless Earbuds User Manual

Model: CB-SLIDE

Introduction

Welcome to the CrossBeats Slide Bluetooth Truly Wireless Earbuds user manual. This guide provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new earbuds. The CrossBeats Slide earbuds are designed for an enhanced audio experience, featuring 40ms low latency, Clearcomm™ Quad mic ENC for clear calls, and powerful 13mm EchoBlast™ drivers. Enjoy up to 75 hours of playtime with the charging case and convenient full touch controls.

Included in the box: Earbuds, Charging Case, Ear Cushions, USB Type-C Charging Cable, User Manual, Warranty Card.

CrossBeats Slide Earbuds in charging case

Image: CrossBeats Slide Truly Wireless Earbuds in their charging case, showcasing the sleek blue design.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the CrossBeats Slide earbuds and their charging case. Connect the provided USB Type-C cable to the charging port on the case and a power source. The LED indicators on the case will show the charging status. The Snap Charge™ feature allows for quick charging.

CrossBeats Slide charging case with LED indicators

Image: The CrossBeats Slide charging case with its unique slide-to-open design, showing the LED light indication for charging status.

2. Initial Pairing

  1. Open the charging case. The earbuds will automatically enter pairing mode.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth.
  3. Search for available Bluetooth devices and select "CrossBeats Slide" from the list.
  4. Once connected, you will hear a confirmation prompt, and the earbuds are ready for use. The earbuds feature instant auto-pairing for subsequent connections.

3. Wearing the Earbuds

Gently insert the earbuds into your ears. Adjust them for a comfortable and secure fit to ensure optimal sound quality and noise isolation. The ergonomic design helps them stay in place during various activities.

Person wearing CrossBeats Slide earbuds

Image: A person wearing the CrossBeats Slide earbuds, demonstrating proper fit and placement in the ear.

Operating Instructions

Touch Controls

The CrossBeats Slide earbuds feature multi-function touch controls on each earbud for easy management of music, calls, and voice assistants.

  • Play/Pause Music: Single tap on either earbud.
  • Next Track: Double tap on the right earbud.
  • Previous Track: Double tap on the left earbud.
  • Answer/End Call: Single tap on either earbud during an incoming call or active call.
  • Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
  • Activate Voice Assistant: Triple tap on either earbud.
CrossBeats Slide earbud showing touch control area

Image: A close-up of a CrossBeats Slide earbud highlighting the multi-function touch control area.

Voice Assistant Access

Access your device's voice assistant (Siri, Ok Google) with a simple triple tap on either earbud. This allows you to set reminders, direct tasks, and manage calendar events hands-free.

CrossBeats Slide earbuds with Siri and Google Assistant logos

Image: CrossBeats Slide earbuds depicted with icons for Siri and Ok Google, illustrating swift voice command capabilities.

Call Management

The Clearcomm™ Quad mic ENC (Environmental Noise Cancelling) technology ensures clear hands-free calling by reducing background noise.

Woman making a handsfree call with CrossBeats Slide earbuds

Image: A woman using CrossBeats Slide earbuds for hands-free calling, demonstrating the quad microphone feature.

Audio Experience

Experience rich bass and clear audio with the 13mm EchoBlast™ drivers. The 40ms low latency ensures synchronized audio, especially beneficial for gaming and video playback.

Diagram showing CrossBeats EchoBlast 13mm driver

Image: A visual representation of the CrossBeats EchoBlast 13mm driver, highlighting its audio capabilities.

CrossBeats earbuds illustrating low latency and ENC

Image: CrossBeats earbuds with visual cues for low latency and Environmental Noise Cancellation (ENC).

Maintenance

Cleaning

  • Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents.
  • Gently clean the charging contacts on both the earbuds and the case to ensure proper connection.

Water Resistance

The CrossBeats Slide earbuds feature IPX4 water resistance, making them resistant to splashes and sweat. This means they can withstand light rain or intense workouts, but they are not designed for submersion in water.

CrossBeats Slide earbuds with water splashes

Image: CrossBeats Slide earbuds shown with water splashes, illustrating their water-resistant design.

Storage

When not in use, store the earbuds in their charging case to protect them from dust, damage, and to keep them charged.

Troubleshooting

If you encounter any issues with your CrossBeats Slide earbuds, please refer to the following common solutions:

  • Earbuds not pairing: Ensure both earbuds are charged. Place them back in the case, close it, then open it again to re-enter pairing mode. Make sure Bluetooth is enabled on your device and try re-pairing.
  • Only one earbud working: Try placing both earbuds back in the charging case, closing the lid, and then opening it again. Ensure both earbuds are properly charged. If the issue persists, try resetting the earbuds (refer to the full user manual for specific reset instructions if available).
  • Charging issues: Check if the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
  • Low audio quality or connectivity drops: Ensure your device is within the effective Bluetooth range (typically 10 meters/33 feet) and there are no significant obstructions. Try disconnecting and re-connecting the earbuds to your device.
  • Voice Assistant not responding: Ensure the earbuds are properly connected to your device and that your device's voice assistant is enabled and configured.

Specifications

FeatureDetail
Model NameCB_SLIDE
Connectivity TechnologyWireless (Bluetooth 5.1v)
Wireless Communication TechnologyBluetooth
Drivers13mm EchoBlast™ Neodymium Drivers
MicrophoneQuad Microphones with Clearcomm™ ENC
Low Latency40ms
PlaytimeUp to 75 hours (with charging case)
Control TypeTouch Control (Multi-Function)
Water Resistance LevelIPX4 (Water Resistant)
Charging PortUSB Type-C (Snap Charge™)
Voice AssistantSiri, Ok Google
Item Weight15 Grams
Product Dimensions5 x 2 x 2 cm
MaterialPlastic
UPC850025215541

Warranty Information

The CrossBeats Slide earbuds come with a 12-month warranty. Please refer to the warranty card included in your product packaging for detailed terms and conditions, including coverage and claim procedures.

Support

For further assistance, technical support, or inquiries regarding your CrossBeats Slide earbuds, please visit the official CrossBeats website or contact their customer service. Contact details can typically be found on the brand's official website or on the product packaging.

Manufacturer: Crossbeats, sellbrite digital-Ground floor, brigade tower, brigade road, bangalore-560025

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.