Setup Instructions
- 1. Unpack Components: Carefully remove all panels and accessories from the packaging.
Image: All 18 playpen panels, including the game panel and gate panel, along with connectors and suction cups, are laid out on a rug.
- 2. Connect Panels: Align the connecting nuts on the sides of two panels. Push down firmly to secure the connection. Ensure the buckle is completely stuck in the slot for stability.
Image: A hand demonstrates how to connect two playpen panels by aligning the top connectors and pushing them together. The connection point is highlighted.
Image: A visual guide illustrating the correct method of connecting panels with tight fitting and no gaps, contrasted with an incorrect, loose connection.
- 3. Form Desired Shape: Connect all 18 panels to form your desired shape (e.g., square, rectangle, octagon). You can add or remove panels to adjust the size.
Image: The 18-panel playpen is fully assembled into a spacious square, ready for use.
Image: A collage showing the playpen configured in different shapes like a square, rectangle, and octagon, demonstrating its versatility.
- 4. Install Suction Cups: For hard floor surfaces, attach the provided suction cups to the bottom of each panel to prevent sliding and enhance stability.
Image: A detailed view of the bottom connectors of the playpen, showing where the suction cups are attached for added stability on smooth surfaces.
- 5. Secure Gate: Ensure the gate panel's lock is functioning correctly and is securely closed when the child is inside. The gear lock is designed for adult-only operation.
Image: A close-up of the playpen's gate, highlighting the safety lock mechanism designed to prevent children from opening it.
