Yitong Angel MT08-JD-18Q

Download PDF
Contents

Yitong Angel 18 Inch Queen Bed Frame Instruction Manual

Model: MT08-JD-18Q

1. Product Overview

The Yitong Angel 18 Inch Queen Bed Frame is a heavy-duty metal platform designed for durability and stability. It features steel slat support, eliminating the need for a box spring, and incorporates noise-free and non-slip elements for a comfortable sleep experience. The frame also includes rounded corner edges for safety.

Assembled Yitong Angel 18 Inch Queen Bed Frame

Image 1.1: Fully assembled Yitong Angel 18 Inch Queen Bed Frame, showcasing its robust design.

Bed frame with 3500 lbs weight capacity indicated

Image 1.2: Illustration highlighting the 3500 lbs weight capacity of the bed frame.

2. Safety Information

  • Always follow assembly instructions carefully.
  • Ensure all bolts and screws are securely tightened before use.
  • Do not exceed the maximum weight capacity of 3500 lbs.
  • Keep small children and pets away from the assembly area to prevent injury.
  • The rounded corner design is intended to minimize injury, but caution should still be exercised around the frame.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

ComponentQuantity
Bed Frame SectionsVarious
Steel SlatsIncluded
Assembly Hardware (Screws, Bolts)Included
L-Wrench1
Non-slip Tape Strips4
Plastic Plugs for FeetIncluded
Instruction Manual1

4. Setup and Assembly

Assembly of the Yitong Angel bed frame is designed to be straightforward and typically takes approximately 15 minutes with two people. All necessary tools are included.

  • Included L-Wrench
  • Optional: Hex screwing kit or small power drill with appropriate bit for faster assembly.

4.2 Assembly Steps

  1. Unpack all components and lay them out on a clean, flat surface. Verify against the package contents list.
  2. Identify the main frame sections and connect them according to the provided diagram in the separate instruction sheet. Ensure the U-shaped grooves align correctly for easy assembly.
  3. Insert and hand-tighten all screws and bolts initially.
  4. Once all connections are made, progressively tighten all screws and bolts using the L-wrench. For optimal stability and to prevent noise, tighten each screw on a post, then move to the other screw on the same post, and repeat until both are fully secure and cannot be tightened further.
  5. Place the steel slats onto the frame.
  6. Apply the four non-slip tape strips to the metal slats to help secure the mattress.
  7. Ensure the plastic plugs are securely fitted to the bottom of each bed foot to prevent sliding and protect floors.
Close-up of bed frame features: thickened rubber pad, rounded corner, and U-shaped groove for assembly

Image 4.1: Detailed view of the thickened rubber pads on the feet, the rounded corner design, and the U-shaped groove for simplified assembly.

Close-up of bed frame features: silent foam strip, double-sided tape, and reinforced thick metal

Image 4.2: Close-up showing the silent foam strip, double-sided tape for mattress stability, and the reinforced thick metal construction.

5. Operating Instructions

The Yitong Angel bed frame is designed for immediate use after proper assembly.

  • Mattress Placement: Place your mattress directly onto the steel slats. A box spring is not required.
  • Weight Distribution: Distribute weight evenly across the bed frame. The maximum weight capacity is 3500 lbs.
  • Under-bed Storage: The 18-inch height provides approximately 15.6 inches of clearance for under-bed storage. Utilize this space for bins, boxes, or other items.
Bed frame with mattress and under-bed storage space

Image 5.1: The bed frame with a mattress, illustrating the ample 15.6-inch under-bed storage clearance.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your bed frame.

  • Tighten Connections: Periodically check and re-tighten all screws and bolts to maintain stability and prevent creaking.
  • Clean Frame: Wipe the metal frame with a damp cloth and mild detergent as needed. Avoid abrasive cleaners.
  • Inspect Non-slip Features: Check the non-slip tape on the slats and the plastic plugs on the feet for wear. Replace if necessary to prevent mattress slippage and floor damage.
  • Silent Foam Strips: Ensure the silent foam strips are intact and properly positioned to minimize noise.

7. Troubleshooting

Refer to the following common issues and their solutions.

  • Noise/Creaking:
    • Ensure all assembly screws and bolts are fully tightened. Refer to Section 4.2, Step 4 for detailed tightening instructions.
    • Check that the silent foam strips are correctly installed and not damaged.
  • Mattress Slippage:
    • Verify that the non-slip tape strips are applied to the metal slats. Replace if worn.
  • Frame Sliding on Floor:
    • Confirm that the plastic plugs are securely attached to the bottom of each leg.
  • Missing or Damaged Parts:
    • If you encounter missing or damaged components upon unboxing, do not proceed with assembly. Contact Yitong Angel customer support immediately for assistance.

8. Specifications

FeatureDetail
Model NumberMT08-JD-18Q
SizeQueen
Product Dimensions (L x W x H)79.5" x 59.5" x 18"
Compatible Mattress Size80"L x 60"W
Ground to Item Distance18 Inches (approx. 15.6" under-bed clearance)
Maximum Weight Capacity3500 lbs
MaterialAlloy Steel
ColorBlack
Finish TypeMatte
Special FeaturesRounded Corners, Easy Assembly, Heavy Duty, Steel Slat Support, No Box Spring Needed, Squeak Resistant
Assembly RequiredYes (approx. 15 minutes with two people)
Item Weight46.5 pounds
UPC794261899083
Diagram showing Queen bed frame dimensions and 3500 lbs capacity

Image 8.1: Visual representation of the Queen bed frame dimensions and weight capacity.

9. Warranty Information

Specific warranty details for the Yitong Angel 18 Inch Queen Bed Frame are not provided in the product information. For warranty inquiries, please contact Yitong Angel customer support directly.

10. Customer Support

For any questions, concerns, or assistance with your Yitong Angel bed frame, please contact our customer support team.

  • Manufacturer: Yitong Angel
  • Online Store: Visit the Yitong Angel Store on Amazon
  • Please refer to your purchase documentation or the Yitong Angel store page for the most current contact information.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.