Yitong Angel MT09-JD-14K

Download PDF
Contents

Yitong Angel King Bed Frame Instruction Manual

Model: MT09-JD-14K

Brand: Yitong Angel

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yitong Angel King Bed Frame. Please read all instructions carefully before assembly and use to ensure safe and proper setup.

Key Features:

  • Heavy Duty Construction: Made from high-quality alloy steel, supporting up to 3500 lbs.
  • Steel Slat Support: Strong and durable steel slats eliminate the need for a box spring and extend mattress life.
  • Noise-Free Design: Engineered to prevent squeaking for a quiet sleep environment.
  • Ample Under-Bed Storage: Features 12.4 inches of vertical clearance for convenient storage.
  • Easy Assembly: Simple composition structure allows for quick installation by one person in approximately 20 minutes.
  • Mattress Slide Stoppers: Includes anti-slip rubber pads and fixtures to prevent mattress movement.
  • Headboard Ready: Reserved holes for optional headboard attachment.
Assembled Yitong Angel King Bed Frame with mattress and bedding in a bedroom setting.

Figure 1: Assembled Yitong Angel King Bed Frame.

2. Important Safety Information

  • Do not exceed the weight limit of 3500 lbs.
  • Be cautious of sharp edges during assembly and use.
  • Ensure all bolts are securely tightened before placing a mattress on the frame.
  • Regularly check all connections to ensure they remain tight.
  • Keep small parts away from children during assembly.

3. Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Diagram showing all bed frame components and hardware included in the package.

Figure 2: All components and hardware included in the package.

Components:

  • Side Rails (various lengths)
  • Corner Legs
  • Center Support Bars
  • Steel Slats
  • Mattress Gaskets/Stoppers
  • Anti-slip Rubber Pads for legs

Hardware Kit:

  • Bolts (various sizes)
  • Washers
  • Allen Key / Hex Wrench
  • Ratchet Tool (may be included)

4. Assembly Instructions

Follow these steps carefully for quick and easy assembly. It is recommended to assemble the bed frame in the room where it will be used.

Step 1: Unfold and Connect Main Frame Sections

Unfold the main frame sections (typically two halves for King size). Connect them using the provided bolts and the Allen key/ratchet tool. Ensure the rounded corner legs are correctly oriented.

Video 1: Detailed assembly process for the Yitong Angel bed frame, demonstrating how to connect the main frame sections and secure them with bolts. This video is provided by the seller, Yitong-Angel.

Close-up of the bed frame's triangular structure and U-shaped groove for slat placement.

Figure 3: Illustrates the triangular structure for stability and U-shaped grooves for slats.

Step 2: Install Center Support Bars

Attach the center support bars to the main frame. These bars provide additional stability and weight distribution.

Step 3: Place Steel Slats

Lay the steel slats across the frame, fitting them into the designated U-shaped grooves. Ensure all slats are evenly spaced and securely seated.

Close-up image showing a hand placing a steel slat into a U-shaped groove on the bed frame.

Figure 4: Proper placement of a steel slat into the U-shaped groove.

Step 4: Attach Mattress Slide Stoppers

Install the plastic mattress slide stoppers onto the frame. These fixtures prevent your mattress from shifting during use.

Video 2: Demonstrates the correct way to install the mattress stoppers on the bed frame. This video is provided by the seller, Yitong-Angel.

Close-up of a plastic anti-slip baffle installed on the bed frame to prevent mattress movement.

Figure 5: Mattress anti-slip baffle in place.

Step 5: Final Tightening

Once all components are in place, go back and fully tighten all bolts using the provided tools. Ensure the frame is stable and level.

5. Operating Instructions

Mattress Placement:

Place your mattress directly onto the steel slats. No box spring is needed. The mattress slide stoppers will help keep your mattress securely in place.

Yitong Angel King Bed Frame with a mattress and bedding, showcasing the under-bed storage space.

Figure 6: Bed frame with mattress, highlighting the 12.4-inch under-bed storage.

Utilizing Under-Bed Storage:

The 12.4-inch clearance beneath the frame provides ample space for storage bins, suitcases, or other items. Organize your belongings to maximize bedroom space.

6. Maintenance

  • Cleaning: Wipe the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners.
  • Regular Checks: Periodically inspect all bolts and connections to ensure they are tight. Re-tighten if necessary to maintain stability and prevent noise.
  • Moving the Frame: When moving the bed frame, lift it rather than dragging it to prevent damage to the frame or your flooring.

7. Troubleshooting

Squeaking Noise:

  • Ensure all bolts are fully tightened. Loose connections are a common cause of squeaking.
  • Check that all slats are properly seated in their U-shaped grooves.
  • Verify that the anti-slip rubber pads are correctly installed on the legs to prevent friction with the floor.

Mattress Sliding:

  • Confirm that the mattress slide stoppers are correctly installed on all sides of the frame.
  • If sliding persists, consider placing a non-slip mat between the mattress and the slats.

8. Specifications

Model NumberMT09-JD-14K
SizeKing
Product Dimensions80"L x 75.5"W x 14"H
MaterialMetal (Alloy Steel)
ColorBlack
Finish TypeMatte
Weight Capacity3500 lbs
Under-Bed Clearance12.4 inches
Assembly TimeApprox. 20 minutes (one person)
UPC794261899137

9. Warranty and Support

For any questions, missing parts, or warranty claims, please contact Yitong Angel customer support directly. Refer to your purchase documentation for specific warranty terms and contact information.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.