1. Introduction
Thank you for choosing the Yitong Angel King Bed Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image 1.1: The Yitong Angel King Bed Frame, showcasing its sturdy metal construction.
2. Safety Information
WARNING: Do not exceed the maximum weight capacity of 3500 lbs. Ensure all parts are securely assembled according to the instructions to prevent instability or collapse. Failure to follow these instructions may result in injury or product damage.
- Keep all small parts and packaging materials away from children.
- Assemble the bed frame on a soft, clean surface to prevent scratches.
- Periodically check all connections and tighten as necessary to maintain stability.
- Do not stand or jump on the bed frame.
3. Package Contents
Before assembly, verify that all components are present and undamaged. All necessary assembly tools are included in the package.
- Headboard/Footboard sections (if applicable)
- Side rails
- Steel slats
- Support legs
- Anti-slip gaskets (4 pieces)
- Thickened rubber pads for feet
- Assembly hardware (bolts, washers, nuts)
- Assembly tools (e.g., Allen wrench, mini ratchet)
- Instruction manual

Image 3.1: Key structural components and anti-slip features.
4. Setup and Assembly Instructions
Assembly typically takes approximately 15 minutes. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage.
- Assemble Frame Sections: Connect the main frame sections using the provided bolts and tools. Ensure all connections are finger-tight initially.
- Attach Support Legs: Securely attach all support legs to the frame. The thickened rubber pads should be at the bottom of each leg to protect your floor and prevent sliding.
- Install Steel Slats: Place the steel slats into the designated U-shaped grooves on the frame. The unique U-shaped slot design helps prevent slats from slipping.
- Secure Anti-Slip Gaskets: Position the four anti-slip gaskets on the steel slats where the mattress will rest. These help reduce mattress movement.
- Final Tightening: Once all components are in place, systematically tighten all bolts with the provided tools until secure. Do not overtighten.

Image 4.1: Visual representation of the bed frame's assembly benefits.

Image 4.2: Detail of the U-shaped groove for slat stability.
5. Operating Instructions
This bed frame is designed for use with various mattress types without the need for a box spring.
- Mattress Placement: Place your latex, memory foam, or innerspring mattress directly onto the steel slats. The slats provide ample support, extending the life of your mattress.
- Noise Reduction: The robust alloy steel construction and secure slat design contribute to a noise-free experience.
- Under-bed Storage: The 14-inch high frame provides approximately 12 inches of clearance underneath, offering convenient storage space for items such as seasonal clothing, shoes, or storage bins.

Image 5.1: Demonstrating the ample under-bed storage space.
6. Maintenance
To ensure the longevity and optimal performance of your Yitong Angel bed frame, follow these maintenance guidelines:
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Regular Inspection: Periodically (e.g., every 3-6 months) inspect all bolts and connections to ensure they remain tight. Re-tighten any loose hardware to maintain the frame's stability and prevent noise.
- Floor Protection: Ensure the rubber pads on the bottom of the legs are intact to protect your flooring from scratches and prevent the bed frame from sliding. Replace if worn.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is noisy or squeaks. | Loose bolts or connections. | Check and tighten all bolts and connections securely. Ensure all slats are properly seated in their grooves. |
| Mattress slides on the frame. | Anti-slip tape or gaskets are not properly installed or are worn. | Ensure the four strips of tape on the steel slats are intact. Verify that the anti-slip gaskets are correctly positioned and not dislodged. Re-position or replace if necessary. |
| Frame feels unstable. | Incomplete assembly or uneven floor. | Review assembly steps to ensure all parts are correctly installed and tightened. If the floor is uneven, consider using shims under the legs. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MT05-JD-14K |
| Size | King |
| Product Dimensions (L x W x H) | 80" x 75.5" x 14" |
| Compatible Mattress Size | 80" x 76" |
| Material | Alloy Steel |
| Color | Black |
| Finish Type | Matte |
| Maximum Weight Capacity | 3500 lbs |
| Under-bed Clearance | 12 Inches |
| Assembly Required | Yes |
| Item Weight | 40 pounds |
| UPC | 794261899014 |

Image 8.1: Key dimensions and capacity of the King size bed frame.

Image 8.2: Available bed frame sizes and height options.
9. Warranty and Support
For any questions, concerns, or assistance with your Yitong Angel King Bed Frame, please contact Yitong Angel customer support. While specific warranty details are not provided in this manual, please refer to your purchase documentation or contact the seller for warranty information.
Manufacturer: Yitong Angel
Contact: Please refer to your purchase platform or the Yitong Angel brand store for customer service contact information.