1. Introduction
The XPOWER FM-88W Misting Fan is designed to provide ultimate cooling solutions by lowering ambient temperatures. This powerful and effective unit produces high capacity airflow and features adjustable speeds and oscillation for broad coverage. It is convenient, portable, and suitable for both outdoor misting and indoor air circulation.
Product Overview
Key Features
- Ultimate Misting Solution: Effectively lowers ambient temperatures for enhanced comfort.
- Powerful & Effective: Delivers 1000 CFM airflow with 3 adjustable speeds.
- Wide Coverage: Features 145° rotation angle positions with auto oscillation.
- Convenient & Portable: Lightweight, durable design with a sealed motor.
- Versatile Water Source: Can draw water from a WT-90 reservoir (sold separately) or a 5-gallon utility bucket (not included), eliminating the need for a direct water line.
- Multipurpose Use: Suitable for outdoor misting and indoor air circulation/cooling.
- Safety Certified: ETL / CETL safety certified.
2. Setup
Unpacking
Carefully remove the XPOWER FM-88W Misting Fan from its packaging. Inspect the unit for any signs of damage during transit. Ensure all components listed in the packing list are present before proceeding.
Water Connection
The FM-88W is designed for flexible water sourcing. It can be connected to an XPOWER WT-90 wheeled reservoir or a standard 5-gallon utility bucket.
- Using WT-90 Reservoir: Place the FM-88W securely on top of the WT-90 reservoir. Connect the water pump hose from the fan to the reservoir's water outlet.
- Using 5-Gallon Utility Bucket: Place the FM-88W on a stable surface next to or above a 5-gallon utility bucket filled with water. Insert the water pump hose into the bucket, ensuring it reaches the bottom for continuous water supply.
Power Connection
Plug the fan's power cord into a standard 115V AC electrical outlet. Ensure the outlet is properly grounded and rated for the fan's power requirements (88 watts, 1 Amp or less).
3. Operating Instructions
Control Panel
The FM-88W features an intuitive control panel located on the unit's base.
- Power Button: Press to turn the unit ON or OFF.
- Fan Speed Settings: Select from 3 adjustable fan speeds (1, 2, 3) to control airflow intensity.
- Mist Settings: Choose from 3 mist settings to adjust the mist output.
- Timer Function: Set the operation timer for 0.5 hours, 1 hour, or 2 hours. The unit will automatically shut off after the set time.
Oscillation and Tilt
The FM-88W offers both oscillation and manual tilt adjustments to direct airflow and mist precisely where needed.
- Oscillation: Activate the auto oscillation feature for broader coverage, distributing air and mist across a wider area.
- Tilt Adjustment: Manually adjust the fan head's tilt up to 145 degrees to direct airflow and mist vertically.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your XPOWER FM-88W Misting Fan.
Cleaning
- Mister Nozzles: After each use, it is recommended to remove and dry the mister nozzles to prevent mineral buildup and clogging. Periodically wash them with clean water. Consider using a calcium inhibiting filter if your water supply is hard.
- Fan Blades and Grille: Use a soft, damp cloth to wipe down the fan blades and protective grille. Ensure the unit is unplugged before cleaning.
- Exterior: Wipe the exterior surfaces with a clean, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
Storage
When not in use for extended periods, store the fan in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the water reservoir/bucket is empty and dry before storage. Wrap the hose and cord neatly around the designated handle for easy packing.
5. Troubleshooting
This section addresses common issues you might encounter with your FM-88W Misting Fan.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; Power cord not fully plugged in; Outlet malfunction. | Check power connection; Try a different outlet; Ensure power button is pressed. |
| No mist or low mist output. | Water reservoir empty; Clogged mister nozzles; Kinked water hose; Pump malfunction. | Refill water reservoir/bucket; Clean mister nozzles; Straighten water hose; Contact customer support if pump issue persists. |
| Water leaks from the unit. | Loose connections; Damaged hose or nozzle piece. | Check all hose connections and tighten if loose; Inspect hose and nozzle for damage and replace if necessary. |
| Fan is noisy. | Obstruction in fan blades; Unit not on a stable surface. | Unplug and check for debris in fan blades; Place unit on a flat, stable surface. |
6. Specifications
| Specification | Detail |
|---|---|
| Brand | XPOWER |
| Model Name | FM-88W |
| Power Source | AC Electric |
| Voltage | 115 Volts |
| Wattage | 88 watts |
| Air Flow Capacity | 1000 CFM (Cubic Feet Per Minute) |
| Number of Power Levels | 3 (Fan Speeds) |
| Special Features | Portable, High Velocity, Lightweight, Oscillating, Built-in Water Pump |
| Indoor/Outdoor Usage | Outdoor, Indoor |
| Product Dimensions | 9.6 x 17.1 x 23.5 inches |
| Item Weight | 21.7 pounds |
| Material | Plastic |
| Safety Certification | ETL / CETL |
7. Warranty & Support
Warranty Information
The XPOWER FM-88W Misting Fan comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty inquiries, please contact XPOWER's California-based customer service team. They are dedicated to providing comprehensive support and ensuring a first-class customer experience.
You can also refer to the official User Manual PDF for more detailed information:
