1. Introduction
The GE LED+ Linkable Motion light bulbs are designed to transform any standard fixture into a motion-detecting security light. These PAR38 outdoor floodlights provide automatic, hands-free illumination, enhancing safety and convenience around your home. They feature a unique linking capability, allowing multiple bulbs or fixtures to create an expanded motion sensor system for larger areas. The bulbs are engineered for energy efficiency and long-lasting performance.
2. Important Safety Information
- WARNING: Risk of Electric Shock. Turn off power to the fixture before inspection, installation, or removal.
- Suitable for outdoor use in wet locations when installed in a suitable fixture.
- Not for use with dimmer switches. This product is non-dimmable.
- Do not use with emergency exit fixtures or emergency lights.
- Ensure the bulb is securely screwed into the socket.
- Operating temperature range: -20°C to +40°C (-4°F to +104°F).
3. Package Contents
Your package should contain the following items:
- Three (3) GE LED+ Outdoor Motion Sensor Floodlight Bulbs (PAR38)
Image: Three GE LED+ Motion Sensor PAR38 light bulbs in their retail packaging, highlighting the 'Linkable Motion System'.
4. Setup and Installation
These GE LED+ motion sensor light bulbs are designed to easily replace existing PAR38 halogen floodlight bulbs, providing immediate motion-detecting benefits.
- Turn off Power: Before installation, ensure the power to the light fixture is turned off at the circuit breaker.
- Remove Old Bulb: Carefully unscrew and remove the existing bulb from the fixture.
- Install New Bulb: Screw the GE LED+ Motion Sensor PAR38 bulb into the standard E26 medium base socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker. The bulb will perform a brief self-test.
Linking Multiple Bulbs (Optional)
The GE LED+ Linkable Motion system allows you to connect up to four outdoor light zones to control larger areas. When one linked floodlight is triggered, all linked motion sensor outdoor lights will activate.
- Ensure all bulbs you wish to link are installed in fixtures within range of each other.
- The linking process is automatic once bulbs are powered on and within range. No manual pairing is typically required.
- For optimal performance, ensure clear line of sight between bulbs if possible, though they are designed to communicate wirelessly.
Image: An aerial view of a house and driveway illuminated by multiple linked GE LED+ motion sensor lights, demonstrating the ability to brighten large spaces instantly.
5. Operating Instructions
The GE LED+ Motion Sensor bulbs operate automatically based on ambient light and motion detection.
Dusk-to-Dawn Operation
- The outdoor light automatically turns on at a 50% brightness level from dusk until dawn.
- This provides a continuous, low-level ambient light during nighttime hours.
Image: A GE LED+ motion sensor light bulb illuminating a porch at a lower brightness level, demonstrating its always-on mode for ambient lighting.
Motion Detection
- When motion is detected within the sensor's range, the light automatically switches to 100% illumination.
- The light will remain at 100% brightness for approximately 3 minutes after motion is no longer detected, then return to the 50% dusk-to-dawn level (if it's still dark) or turn off (if it's daytime).
- The motion sensor eliminates the need to manually find a light switch, providing convenient and automatic security lighting.
Image: A person walking towards a house, and a GE LED+ motion sensor light bulb automatically illuminates the area, demonstrating motion detection.
6. Care and Maintenance
The GE LED+ Motion Sensor light bulbs require minimal maintenance.
- Cleaning: Ensure the power is off before cleaning. Wipe the bulb and sensor area with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: These LED bulbs have a long lifespan (rated for 15,000 hours). When replacement is eventually needed, follow the installation steps in Section 4.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; Bulb not screwed in properly; Sensor obstructed. | Check circuit breaker; Ensure bulb is securely installed; Clear any obstructions from the sensor. |
| Light stays on at 50% brightness constantly. | This is normal operation for dusk-to-dawn feature. | This is the intended functionality. The light will brighten to 100% upon motion detection. |
| Motion detection is inconsistent or range is limited. | Sensor obstructed; Environmental factors (e.g., extreme heat/cold, direct sunlight); Sensor angle. | Ensure sensor is clear; Consider repositioning the fixture if possible; Verify the bulb's orientation. |
| Linked bulbs do not all turn on. | Bulbs out of range; Obstructions between bulbs; Power issue to one of the bulbs. | Ensure all linked bulbs are within effective communication range; Check power to all bulbs; Minimize physical obstructions. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | GE Lighting |
| Model Name | LED+ Linkable Motion |
| Item Model Number | 10043168502259 |
| Light Fixture Form | Floodlight |
| Shape | PAR38 |
| Color | Warm White |
| Light Color Temperature | 3000K |
| Brightness | 1200 Lumens |
| Wattage | 15 watts |
| Voltage | 120 Volts |
| Bulb Base | E26 Medium |
| Light Source Type | LED |
| Dimmable | No |
| Rated Life | 15,000 hours |
| Indoor/Outdoor Usage | Outdoor |
| Special Feature | Motion Sensor, Security Light, Linkable |
| Material | Plastic |
| Item Weight | 14.4 ounces (per 3-pack) |
| Product Dimensions | 6 x 3.8 x 3.8 inches (per bulb) |
Image: Diagram illustrating the dimensions of a standard medium base (E26) light bulb, which is the most common base size.
9. Warranty and Support
This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the official GE Lighting website or contact their customer service directly.
Online Support: Visit the official GE Lighting website for FAQs, product registration, and contact information.
