1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your SIGNALPLUS Wide-Band Outdoor Omni-Directional Cellular Antenna. This antenna is designed to enhance 2G, 3G, 4G LTE, and 5G signals for various devices, including routers and cell phone signal boosters, across a broad frequency range of 698-2700MHz.
Please read this manual thoroughly before installation and retain it for future reference.
2. Product Overview
The SIGNALPLUS Omni-Directional Cellular Antenna is engineered for outdoor use, offering 360-degree signal reception and transmission. Its robust design ensures reliable performance in various environmental conditions.
Image: Diagram illustrating the antenna's functions and typical application areas, including compatibility with 2G/3G/4G/LTE/WiFi, working with routers/signal boosters, and supporting various carriers. It also highlights application areas like M2M, poor data signal reception, slow data transmission, and mobile offices.
Image: Visual representation of various compatible 4G/5G devices with external antenna ports, including routers and signal boosters from brands like Netgear, MoFi, Huawei, TP-Link, Pepwave, Cradlepoint, Cel-Fi, SureCall, WeBoost, and HiBoost. It also lists supported carriers such as Verizon, AT&T, T-Mobile, Telus, Bell Canada, Rogers, and DigiCel.
3. Package Contents
Verify that all items listed below are present and in good condition upon opening the package. If any items are missing or damaged, please contact customer support.
- 1 x Antenna
- 1 set hardware (mounting bracket, U-bolts, nuts, washers, expansion bolts)
- 1 x 10-meter RG58 cable
- 1 x TS-9 adapter
- 1 x N male adapter
Image: A clear layout of all components included in the package, featuring the main antenna unit, a 10-meter RG58 cable with N male and SMA male connectors, a TS-9 adapter, an N male adapter, and the complete set of mounting hardware including U-bolts and brackets.
4. Specifications
| Feature | Specification |
|---|---|
| Frequency Range | 698-960 MHz / 1710-2700 MHz |
| Gain | 11 dBi / 12 dBi |
| Bandwidth | 154 MHz / 990 MHz |
| Half-power Beam Width | H: 360° V: 25° |
| VSWR | ≤ 1.5 |
| Input Impedance | 50 Ohm |
| Polarization | Vertical |
| Maximum Input Power | 100 W |
| Lightning Protection | DC Ground |
| Input Connector Type | N Female |
| Dimensions (mm) | 60 x 750 |
| Antenna Weight | 1.50 kg (3.3 lbs) |
| Operating Temperature | -40 to 60 °C |
| Rated Wind Velocity | 60 m/s |
| Radome Material | ABS |
| Mounting Hardware (mm) | 40-60 |
5. Setup Instructions
Proper installation is crucial for optimal performance. Follow these steps carefully.
5.1 Choose an Installation Location
Select an outdoor location that is as high as possible and free from obstructions (e.g., buildings, trees) to ensure a clear line of sight to cellular towers. The antenna is omni-directional, meaning it receives signals from all directions, but height and clear surroundings are still beneficial.
Image: An example of the antenna installed outdoors on a pole, surrounded by trees and a building in the background, demonstrating a typical mounting scenario.
5.2 Assemble the Antenna and Mounting Hardware
- Attach the provided mounting bracket to the base of the antenna using the small bolts and nuts.
- Secure the U-bolts to the mounting bracket.
- Mount the assembled antenna onto a pole (40-60mm diameter recommended) using the U-bolts, washers, and nuts. Ensure it is tightened securely to withstand wind.
Image: A person holding the antenna vertically, with an arrow indicating its length of 29.5 inches (75 cm), providing a sense of its physical dimensions.
5.3 Connect the Cables
- Connect one end of the 10-meter RG58 cable to the N Female connector at the base of the antenna.
- Route the cable to your router or signal booster, ensuring it is protected from damage and moisture.
- Depending on your device's input, use the appropriate adapter (TS-9 or N male) to connect the other end of the RG58 cable to your router or signal booster. Ensure all connections are finger-tight.
5.4 Installation Video Guide
For a visual guide on the installation process, please refer to the video below:
Video: A step-by-step demonstration of how to assemble and connect the SIGNALPLUS omni-directional antenna to a router or signal booster. The video shows attaching the mounting bracket, securing the antenna to a pole, and connecting the N-Female cable to the antenna and then to the device using appropriate adapters.
6. Operating Instructions
Once the antenna is installed and connected, ensure your router or signal booster is powered on. The antenna will automatically begin receiving and transmitting signals. No specific configuration is required for the antenna itself.
- Signal Strength Monitoring: Check the signal strength indicator on your connected device (router, signal booster, or phone) to verify improved reception.
- Optimal Placement: While omni-directional, slight adjustments to the antenna's height or immediate surroundings might further optimize signal quality in some challenging environments.
7. Maintenance
The SIGNALPLUS antenna is designed for durability and requires minimal maintenance.
- Periodic Inspection: Annually inspect the antenna and mounting hardware for any signs of wear, corrosion, or loosening. Ensure all connections remain tight.
- Cleaning: If necessary, gently clean the antenna's radome with a soft, damp cloth to remove dirt or debris that might accumulate over time. Avoid harsh chemicals or abrasive materials.
- Cable Integrity: Check the coaxial cable for any kinks, cuts, or damage. Damaged cables can degrade signal performance.
8. Troubleshooting
If you experience issues with your antenna, consider the following troubleshooting steps:
- No Signal Improvement:
- Ensure all cable connections are secure and correctly attached to both the antenna and your device.
- Verify that your router or signal booster is powered on and configured correctly according to its own manual.
- Check for any new obstructions that might be blocking the signal path.
- Confirm that the antenna is mounted at a sufficient height.
- Intermittent Signal:
- Inspect the coaxial cable for damage or loose connections.
- Ensure the mounting hardware is firmly secured and the antenna is not swaying in the wind.
- Physical Damage:
- If the antenna or cables are visibly damaged, they may need replacement.
If problems persist after following these steps, please contact SIGNALPLUS customer support.
9. Warranty and Support
This product is covered by a standard return policy allowing for a refund or replacement within 30 days of purchase. For specific warranty details and to initiate a return or replacement, please refer to your purchase documentation or contact the seller directly.
For additional support or inquiries, you may visit the official SIGNALPLUS store: SIGNALPLUS Store on Amazon.