1. Introduction
Thank you for choosing the HOMCOM Lift Recliner Armchair. This electric armchair is designed to provide comfort and assistance, featuring both reclining and lifting functions controlled by a wired remote. The lift function aids users in standing up from a seated position, while the recline function allows for relaxation. Please read this manual thoroughly before assembly and operation to ensure safe and correct usage.

2. Safety Information
- General Safety: This product is not a toy and should be kept out of reach of children. Ensure children and pets are clear of the chair's moving parts during operation.
- Weight Limit: Do not exceed the maximum weight capacity of 150 kg (330 lbs). Overloading can cause damage to the chair and potential injury.
- Power Supply: Only use the provided power adapter. Ensure the power cord is not pinched, tangled, or placed under the chair. Disconnect power before cleaning or maintenance.
- Placement: Place the armchair on a level, stable surface. Ensure there is adequate clearance around the chair for reclining and lifting movements. Avoid placing near heat sources or in damp environments.
- Operation: Do not attempt to stop the chair's movement manually during operation. Ensure no objects obstruct the recline or lift mechanisms.
- Medical Conditions: Individuals with certain medical conditions should consult a physician before using a lift recliner.
3. Package Contents
Before beginning assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Backrest Section
- Seat Base Section with Armrests
- Power Adapter and Cable
- Wired Remote Control
- Assembly Hardware (screws, bolts, etc., if applicable)
- Instruction Manual
4. Assembly Instructions
Assembly typically requires two adults due to the weight and size of the components. The chair weighs approximately 38 kg.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Attach Backrest: Align the metal brackets on the backrest section with the corresponding slots on the seat base. Slide the backrest down firmly until it clicks into place. Ensure it is securely locked.
- Connect Wiring: Locate the electrical cables extending from the backrest and the seat base. Connect them securely. Ensure all connections are tight.
- Connect Power: Plug the power adapter into the chair's power input port, then plug the adapter into a wall outlet.
- Test Functions: Use the remote control to test the recline and lift functions to ensure proper operation before use.
5. Operating Instructions
The HOMCOM Lift Recliner Armchair is operated using the wired remote control. Ensure the chair is connected to a power source before use.

5.1 Remote Control Functions

- 'Extended' Button: Press and hold this button to recline the backrest and extend the footrest. The backrest can recline up to 145 degrees. Release the button to stop at your desired position.
- 'Retracted' Button: Press and hold this button to return the chair to an upright position, retract the footrest, and then initiate the lift function. The chair will tilt forward up to 45 degrees to assist you in standing. Release the button to stop at your desired position.
5.2 Remote Storage
The remote control can be conveniently stored in the side pocket located on the armchair when not in use.


6. Maintenance
6.1 Cleaning
- PU Leather: Wipe the PU leather surface with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners or solvents, as these can damage the material.
- Frame: Dust the metal frame and base with a dry cloth.
6.2 General Care
- Regularly check all connections and fasteners to ensure they are tight.
- Inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support for a replacement.
- Avoid exposing the chair to direct sunlight or extreme temperatures, which can cause the PU leather to fade or crack.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not move. | No power supply. | Ensure the power adapter is securely plugged into the chair and a working wall outlet. Check if the outlet has power. |
| Remote control is unresponsive. | Loose connection. | Check the connection of the remote control cable to the chair. Ensure it is fully inserted. |
| Chair makes unusual noises. | Loose hardware or obstruction. | Inspect the chair for any loose screws or bolts and tighten them. Check for any objects obstructing the mechanism. |
| Recline/Lift function is jerky or incomplete. | Overload or obstruction. | Ensure the user's weight does not exceed 150 kg. Check for any obstructions in the mechanism. |
If you encounter any issues not listed here or if the suggested solutions do not resolve the problem, please contact HOMCOM customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model | IT713-066V90WT0631 |
| Color | Cream |
| Material | Polyurethane (PU Leather) |
| Overall Dimensions (Upright) | 67L x 95D x 105H cm |
| Reclined Dimensions | 161L x 66D x 84H cm |
| Lifted Dimensions | 84L x 66D x 138H cm |
| Seat Dimensions | 48L x 50D x 48H cm |
| Maximum Load Capacity | 150 kg (330 lbs) |
| Maximum Recline Angle | 145° |
| Maximum Lift Angle | 45° |
| Item Weight | 38 kg |
| Special Features | Lift function, Reclining backrest, Footrest, Wired remote control, Side pocket, Thick padding, Robust metal base |



9. Warranty and Customer Support
For warranty information, product support, or to report any issues, please contact HOMCOM customer service. Refer to your purchase documentation for specific warranty terms and contact details. Keep your proof of purchase for any warranty claims.
Online Support: Visit the official HOMCOM website for FAQs and support resources.
Contact Information: Please refer to the contact details provided with your product packaging or on the retailer's website where the product was purchased.