1. Product Overview
The Spigen Air Skin Glitter case is designed to provide protection for your Samsung Galaxy Z Flip4 while maintaining its original aesthetic. Crafted from clear, sturdy polycarbonate (PC) material, this ultra-thin and lightweight case allows the device's beauty to shine through. It features a slim fit and precise cutouts for full functionality.
Key Features:
- Slim and Lightweight Design: At 0.8mm extra slim, it adds minimal bulk to your device.
- Durable PC Material: Made from high-quality polycarbonate with anti-fingerprint, smudge-resistant, and scratch-resistant properties.
- Perfect Fit: Exact fit with precise cutouts ensures easy access to all connections and buttons.
- Wireless Charging Compatible: Designed to support wireless charging without removing the case.
- Designed for Samsung: Licensed under the Samsung Mobile Partnership Program (SMAPP).
Figure 1: Spigen Air Skin Glitter Case on a Samsung Galaxy Z Flip4, showcasing its transparent design and glitter finish.
2. Installation
Follow these steps to properly install the Spigen Air Skin Glitter case on your Samsung Galaxy Z Flip4:
- Clean Your Device: Before installation, ensure your Samsung Galaxy Z Flip4 is clean and free of dust or debris. Use a soft, lint-free cloth to wipe down the front and back surfaces.
- Identify Case Sections: The Spigen Air Skin Glitter case consists of two separate pieces: one for the top half of the phone and one for the bottom half.
- Install Top Section: Gently align the top case piece with the top half of your Galaxy Z Flip4. Ensure the camera cutouts and button alignments match perfectly. Press firmly but gently around the edges until the case snaps securely into place.
- Install Bottom Section: Repeat the process for the bottom case piece. Align it with the bottom half of your phone, ensuring the charging port and speaker cutouts are correctly positioned. Press firmly until it snaps securely.
- Verify Fit: Once both pieces are installed, gently check all edges and corners to ensure the case is fully seated and there are no gaps. The case should fit snugly without excessive force.
Figure 2: The Spigen Air Skin Glitter case precisely designed for the Samsung Galaxy Z Flip4, showing a secure fit.
3. Operating and Usage
The Spigen Air Skin Glitter case is designed for seamless integration with your Samsung Galaxy Z Flip4, providing protection without hindering functionality.
- Protection: The sturdy polycarbonate material protects your device from daily scratches, minor bumps, and impacts. Internal raised edges and external casing help maintain the phone's pristine condition.
- Accessibility: Precision cutouts ensure full access to all ports, speakers, and the charging port. Buttons are easily reachable and responsive.
- Wireless Charging: The slim design of the case allows for full compatibility with wireless charging. You do not need to remove the case to charge your device wirelessly.
- Folding Mechanism: The two-piece design ensures the phone's folding mechanism operates smoothly and without obstruction.
Figure 3: The case provides protection for the Samsung Galaxy Z Flip4, including internal raised edges and external casing.
Figure 4: The Spigen Air Skin Glitter case supports wireless charging, PowerShare, and USB-C connections.
4. Maintenance
To keep your Spigen Air Skin Glitter case clean and maintain its appearance, follow these simple guidelines:
- Regular Cleaning: Wipe the case regularly with a soft, damp cloth to remove dust, fingerprints, and smudges.
- Stubborn Stains: For more stubborn dirt, use a small amount of mild soap diluted in water. Apply with a soft cloth, then wipe clean with a separate damp cloth and dry thoroughly.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate material and its finish.
- Drying: Ensure the case is completely dry before re-installing it on your phone.
Figure 5: The case is designed for long-lasting clarity, preserving the originality of the device.
5. Troubleshooting
If you encounter any issues with your Spigen Air Skin Glitter case, consider the following:
- Case Not Fitting Properly:
- Ensure you have the correct model case for your Samsung Galaxy Z Flip4.
- Remove the case and re-install, making sure both top and bottom pieces are aligned correctly and snapped into place firmly.
- Check for any foreign objects or debris between the phone and the case that might prevent a proper fit.
- Scratches or Discoloration:
- While the case is scratch-resistant, extreme conditions or abrasive materials can cause damage. Avoid contact with sharp objects.
- Polycarbonate cases can show signs of wear over time. Follow maintenance instructions to prolong its appearance.
- Wireless Charging Issues:
- Ensure your phone is correctly centered on the wireless charging pad.
- Verify that your wireless charger is functioning correctly with other devices (if available).
6. Specifications
| Brand | Spigen |
| Model Name | Air Skin Glitter |
| Model Number | ACS05113 |
| Compatible Phone Models | Samsung Galaxy Z Flip4 |
| Colour | Air Skin Glitter (Crystal Quartz) |
| Material | Polycarbonate |
| Product Features | Air-cushion technology, Lightweight, Shock-Absorbent, Slim Fit, Wireless Charging Compatible |
| Item Dimensions (L x W x H) | 7.6 x 1 x 15.2 Centimeters |
| Item Weight | 18.79 Grams |
| Country of Origin | Korea, Republic of |
7. Warranty and Support
Warranty Information:
This Spigen product comes with a 1 Year Warranty against manufacturing defects only. Please retain your proof of purchase for warranty claims.
Customer Support:
For any inquiries, technical assistance, or warranty claims, please contact Spigen customer support:
- Email: spigen.support@spigen.com
- Manufacturer: Spigen Korea Co., Ltd. / SpigenHQ, 446, Bongeunsa-ro, Gangnam-gu, Seoul, Rep. of Korea
- Importer (India): Spigen India Pvt. Ltd., No.295-296, Ecotech-1, Extension, Greater Noida, UP