1. Introduction and Overview
This manual provides essential information for the safe and efficient operation of your OMTech 60W Fiber Laser Marking Machine. This advanced laser engraver is designed for high-precision marking and etching on a wide range of materials, including metals, gemstones, and silicon, with the capability for colorful designs.
Key features include a 60W JPT MOPA fiber laser source, a 175x175mm work area, and compatibility with EzCad2 and LightBurn software. The machine offers superfast speeds of up to 10000 mm/s and high accuracy for intricate designs.
Figure 1: OMTech 60W Fiber Laser Marking Machine.
Figure 2: Overview of key specifications including 60W rated power, 0.1mm max marking depth, 100,000 hr service life, 1064NM laser wavelength, 10000 MM/S max marking speed, 6.9"x6.9" processing area, EzCad2 included, and LightBurn compatibility.
2. Safety Information
WARNING: This product is a Class 2 laser device with 0.874 mW output power. Always wear the provided protective eyewear when operating the machine. Never look directly into the laser beam. Ensure proper ventilation in your workspace to avoid inhaling fumes from engraved materials.
- Read and understand all instructions before operating the machine.
- Keep the work area clean and free of flammable materials.
- Do not operate the machine if any components are damaged.
- Ensure the machine is properly grounded.
- Keep children and unauthorized personnel away from the operating machine.
3. What's in the Box
Your OMTech 60W Fiber Laser Marking Machine package includes the following components:
- 60W JPT M7 Laser Source for Colorful Marking
- 175x175mm F-Theta Lens
- High Speed (up to 7m/s) Galvo Scanner
- Ezcad2 Fiber Marking Software
- Protective Eyewear
- All Necessary Accessories (Hex Wrenches, Attaching Bolts, Height Lock, USB Flash Drive, Power Cable, Foot Switch, USB Cable, Positioning Bars, Laser Keys, Tape Measure, Tool Box, Monitor Mount)
Figure 3: Visual representation of the items included in the package, such as the laser unit, protective eyewear, hex wrenches, attaching bolts, height lock, USB flash drive, power cable, foot switch, USB cable, positioning bars, laser keys, tape measure, tool box, and monitor mount.
4. Setup
- Unpacking and Placement: Carefully remove all components from the packaging. Place the laser marking machine on a stable, level surface in a well-ventilated area.
- Software Installation: Install the EzCad2 software from the provided USB flash drive onto your Windows PC (compatible with Windows XP, Vista, 7, 8, or 10). For LightBurn compatibility, ensure you have the correct drivers and configuration files.
- Connections:
- Connect the power cable to the machine and a grounded power outlet.
- Connect the USB cable from the machine to your computer.
- If using, connect the footpad trigger to the designated port.
- For engraving curved surfaces, connect an optional rotary axis (not included) to the 4-pin port.
- Focusing and Calibration: Use the laser locator and positioning bars on the workbed for fast and exact calibration and focusing. Refer to the EzCad2 software manual for detailed focusing procedures.
Figure 4: The OMTech laser engraver is widely compatible with EzCad2 and LightBurn software, supporting Windows XP, Vista, 7, 8, and 10 for easy creation of stunning patterns and images.
5. Operating Instructions
The OMTech 60W Fiber Laser Marking Machine is designed for efficient and precise engraving. Follow these general steps for operation:
- Design Preparation: Create or import your design using EzCad2 or LightBurn software. Ensure your design is optimized for laser engraving (e.g., vector graphics for cutting, raster images for engraving).
- Material Placement: Place your material securely on the workbed. Use the built-in grid and positioning bars for accurate alignment.
- Parameter Settings: Adjust laser parameters (power, speed, frequency, pulse width) in the software according to your material and desired effect. The adjustable pulse frequency and width are crucial for achieving colorful designs on metals.
- Focus Adjustment: Fine-tune the laser focus for optimal engraving quality. The red dot guide assists in precise focusing.
- Start Engraving: Ensure all safety precautions are met, including wearing protective eyewear. Initiate the engraving process via the software or by using the footpad trigger for batch work.
Figure 5: The OMTech 60W MOPA fiber laser allows for the creation of colorful designs on stainless steel by adjusting pulse frequency and width.
Video 1: An official product video from OMTech Direct demonstrating the laser engraver in action, showcasing its capabilities for various applications and materials.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your laser marking machine:
- Lens Cleaning: Regularly inspect and clean the F-Theta lens using specialized lens cleaning solutions and wipes to prevent dust and debris buildup, which can affect laser performance.
- Work Area Cleaning: Keep the workbed and surrounding area clean from engraved material residue.
- Component Inspection: Periodically check all cables, connections, and moving parts for wear or damage.
- Software Updates: Keep your EzCad2 or LightBurn software updated to the latest version for improved features and bug fixes.
7. Troubleshooting
If you encounter issues with your OMTech 60W Fiber Laser Marking Machine, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Weak Laser Output / Poor Engraving Quality | Incorrect focus, dirty lens, incorrect power/speed settings, material not suitable. | Re-focus the laser. Clean the F-Theta lens. Adjust power and speed settings in software. Ensure material is compatible with fiber laser. |
| Software Connection Issues | USB cable disconnected, driver issues, software not recognizing machine. | Check USB cable connection. Reinstall or update USB drivers. Restart software and machine. |
| Machine Not Responding | Power supply issue, emergency stop engaged, loose connections. | Check power connection. Release emergency stop button. Verify all cables are securely connected. |
For further assistance, please contact OMTech customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Output Power | 60W |
| Marking Area | 6.9x6.9 in. (175x175 mm) |
| Max. Marking Speed | 275.6 ips (7000 mm/s) |
| Expected Service Life (MTTF) | 100,000 hr. |
| Laser Wavelength | 1064 nm |
| Laser Frequency | 1–4000 kHz |
| Pulse Width | 2–500 ns |
| Beam Diameter | 7±0.5 mm |
| Min. Beam Quality (Max. M²) | 1.4 |
| Max. Pulse Energy | 1.5 mJ |
| Provided Operating Software | EzCad2 |
| Compatible Operating Systems | Windows XP, Vista, 7, 8, or 10 |
| Product Dimensions | 22 x 22 x 28 inches |
| Item Weight | 73 pounds |
Figure 6: Detailed specifications for the OMTech 60W MOPA Fiber Laser, including output power, marking area, max marking speed, expected service life, laser wavelength, laser frequency, pulse width, beam diameter, min. beam quality, max. pulse energy, provided operating software, and compatible operating systems.
9. Warranty and Support
OMTech provides customer support for your laser marking machine. For any inquiries, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official OMTech website.
You can also find helpful resources and frequently asked questions on the OMTech Store on Amazon.
