1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Savoy House Kameron 10-Light Chandelier, Model 1-1805-10-109. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1.1: Savoy House Kameron 10-Light Chandelier, Polished Nickel finish, featuring ten candelabra-style lights and crystal accents.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:
- Read all instructions: Ensure you understand all installation and operation procedures before proceeding.
- Disconnect power: Always turn off the electrical supply at the main fuse box or circuit breaker before installing, servicing, or cleaning the fixture.
- Qualified electrician: Installation should be performed by a qualified electrician or a certified professional to ensure proper wiring and safety.
- Grounding: The fixture must be properly grounded to prevent potential electrical shock.
- Bulb specifications: Use only bulbs of the specified type and wattage (E12 base, Incandescent or LED, Max 60W per bulb). Exceeding the maximum wattage can cause overheating and fire.
- UL/CUL Safety Rating: This product is UL/CUL rated, indicating compliance with safety standards.
- Fixture weight: Ensure the mounting surface can support the weight of the chandelier (approximately 45.3 pounds).
- Legal Disclaimer: Please check your local laws before purchasing and installing this product.
3. Package Contents
Carefully unpack your new fixture and lay out all parts on a clear area. Ensure all components listed below are present before discarding packaging materials.
- Chandelier Fixture Body
- Mounting Hardware Kit (Canopy, Mounting Plate, Screws, Wire Nuts)
- Downrods/Chain (if applicable)
- Crystal Elements (pre-attached or separate for assembly)
- Instruction Manual
4. Setup and Installation
4.1. Before You Begin
- Tools Required: Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses.
- Power Off: Turn off electricity at the main fuse box or circuit breaker.
4.2. Mounting the Fixture
- Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Determine the desired hanging height and assemble the downrods or chain accordingly.
- Thread the fixture wires through the downrods/chain and canopy.
4.3. Wiring Instructions
Always consult a qualified electrician if you are unsure about wiring procedures.
- Connect the fixture's bare copper ground wire to the house's ground wire (usually bare copper or green) using a wire nut.
- Connect the fixture's white wire to the house's white (neutral) wire using a wire nut.
- Connect the fixture's black wire to the house's black (hot) wire using a wire nut.
- Carefully tuck all wires into the junction box.
4.4. Attaching Decorative Elements
The Kameron Chandelier features crystal embellishments. These may be pre-attached or require individual hanging.
- If crystals are separate, carefully attach each crystal element to the designated loops on the fixture body. Refer to the product diagram for correct placement.
- Ensure all crystals are securely fastened to prevent them from falling.
Image 4.1: Close-up view of the chandelier's crystal accents and E12 bulb sockets.
4.5. Final Assembly
- Secure the canopy to the mounting plate with the provided screws.
- Install 10 E12 base bulbs (max 60W each) into the sockets.
- Restore power at the main fuse box or circuit breaker.
- Test the fixture to ensure proper operation.
5. Operating Instructions
The Savoy House Kameron Chandelier operates via a standard wall switch (not included). Once installed and wired correctly, simply toggle the wall switch to turn the light fixture on or off.
- Bulb Type: E12 Candelabra base, Incandescent or LED.
- Maximum Wattage: 60 Watts per bulb. Do not exceed this limit.
- Light Color: White (dependent on bulb choice).
6. Care and Maintenance
6.1. Cleaning
- Always disconnect power: Before cleaning, ensure the power supply to the fixture is turned off at the circuit breaker.
- Dusting: Use a soft, dry cloth to dust the metal finish and crystal elements regularly.
- Spot cleaning: For more stubborn marks, lightly dampen a soft cloth with plain water. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or crystals.
- Crystal care: Crystals can be gently wiped with a lint-free cloth. For a deeper clean, some crystals can be carefully removed and washed in mild soapy water, then rinsed and dried thoroughly before reattaching.
6.2. Bulb Replacement
- Disconnect power: Turn off the power to the fixture at the circuit breaker.
- Allow to cool: Let the bulbs cool completely before attempting to remove them.
- Remove old bulb: Carefully unscrew the old bulb counter-clockwise.
- Install new bulb: Screw in a new E12 base bulb (max 60W) clockwise until snug. Do not overtighten.
- Restore power: Turn the power back on at the circuit breaker.
7. Troubleshooting Guide
If you experience issues with your chandelier, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty bulb; Faulty wall switch. | Check circuit breaker; Verify all wire connections; Replace bulb; Test wall switch. |
| Flickering lights | Loose bulb; Incorrect bulb type; Loose wiring connection. | Tighten bulbs; Ensure correct bulb type and wattage; Check wiring connections. |
| Buzzing sound | Loose wiring; Incompatible dimmer switch (if applicable); Faulty bulb. | Check wiring connections; Ensure dimmer switch is compatible with LED/Incandescent bulbs; Replace bulb. |
| Fixture is unstable | Improper mounting; Loose mounting hardware. | Ensure mounting plate is securely fastened to the junction box and ceiling structure. |
8. Product Specifications
Below are the technical specifications for the Savoy House Kameron 10-Light Chandelier (Model 1-1805-10-109).
| Feature | Specification |
|---|---|
| Brand | Savoy House |
| Model Number | 1-1805-10-109 |
| Color | Polished Nickel |
| Material | Metal, Glass (Shade Material) |
| Style | Standard, Vintage |
| Light Fixture Form | Chandelier |
| Room Type | Living Area |
| Indoor/Outdoor Usage | Indoor |
| Power Source | AC |
| Light Source | Incandescent, LED |
| Number of Light Sources | 10 |
| Voltage | 110 Volts (AC) |
| Light Color | White (dependent on bulb) |
| Embellishment Feature | Crystal |
| Lighting Method | Up/Down Light |
| Wattage (per bulb) | 60 watts (Max) |
| Bulb Base | E12 |
| Water Resistance Level | Not Water Resistant |
| Brightness (Total) | 8000 Lumens (with appropriate bulbs) |
| Efficiency | 133.33 lumens/watt (with appropriate bulbs) |
| Mounting Type | Protruding, Semi Flush Mount |
| Required Assembly | Yes |
| Item Dimensions (L x W x H) | 60"L x 60"W x 32"H |
| Item Weight | 45.3 Pounds |
| UPC | 822920296413 |
9. Warranty Information
This Savoy House Kameron Chandelier (Model 1-1805-10-109) includes a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
Please retain your proof of purchase for warranty claims.
10. Customer Support
If you have any questions regarding the installation, operation, or maintenance of your Savoy House Kameron Chandelier, or if you require technical assistance, please contact Savoy House customer support.
For the most current contact information, please visit the official Savoy House website or refer to your purchase documentation.
