Introduction
The Brondell SMB-15 is a side-mounted manual bidet attachment designed for toilet seats. It features solid brass construction with a durable chrome finish, offering a plastic-free design. This bidet provides an adjustable wash with precise water pressure control and a manual swing-action nozzle arm for targeted rinsing. It operates without electricity or batteries.
Image: The Brondell SMB-15 bidet attachment shown installed on the side of a toilet, highlighting its compact and integrated design.
Package Contents
Verify that all components are present before beginning installation:
- Bidet Attachment (SMB-15)
- Metal Nut
- Metal Washer
- Mounting Guide Bolt
- Small Rubber Washer
- Stainless Steel T-Valve
- Metal Braided Cold-Water Supply Hose
Setup and Installation
The Brondell SMB-15 is designed for easy, DIY installation. It is compatible with a wide range of toilets, including French-curved, skirted, and one-piece models. No special tools are typically required beyond standard household items.
- Preparation: Turn off the water supply to your toilet and flush the toilet to empty the tank.
- Remove Toilet Seat: Detach your existing toilet seat from the toilet bowl.
- Attach Bidet: Position the bidet attachment under your toilet seat. The ultra-thin frame is designed to fit without creating a gap. Use the provided mounting guide bolt, metal nut, and washers to secure the bidet attachment to the toilet bowl. Ensure the rubber pads guard against scratches.
- Connect Water Supply:
- Disconnect the existing water supply hose from the toilet tank fill valve.
- Install the stainless steel T-Valve at the toilet tank fill valve.
- Connect the metal braided cold-water supply hose from the T-Valve to the bidet attachment's water inlet.
- Reconnect the original toilet supply hose to the T-Valve.
- Restore Water: Slowly turn the water supply back on and check for any leaks. Tighten connections as needed.
- Test Functionality: Test the bidet's spray function and water pressure control.
Video: A detailed product overview demonstrating the components and installation process of the Brondell SMB-15 bidet attachment.
Image: The Brondell SMB-15 bidet attachment showcasing its ultra-thin profile, designed to fit seamlessly under a toilet seat without adding bulk.
Operating Instructions
The Brondell SMB-15 offers a simple and intuitive manual operation.
- Nozzle Positioning: Use the manual swing-action arm lever to position the nozzle for your desired rinse. The nozzle can be adjusted to achieve a perfectly aimed spray.
- Water Pressure Control: Turn the easy-twist knob to control the water flow and pressure. Rotate the knob gradually to find your preferred intensity.
- Rinsing: The bidet delivers an ambient temperature rinse with a full-coverage spray pattern.
- Nozzle Retraction: After use, the nozzle tucks away for hygienic storage by moving the arm lever back to its original position.
Image: A close-up view of the Brondell SMB-15 bidet attachment, showing the manual swing-action arm lever for nozzle positioning and the easy-twist knob for water pressure control.
Image: An illustration of water spraying from the Brondell SMB-15 bidet nozzle, demonstrating its full-coverage spray pattern for effective cleaning.
Maintenance
Regular cleaning will ensure optimal performance and hygiene for your Brondell SMB-15 bidet attachment.
- General Cleaning: Clean the exterior of the bidet attachment with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the chrome finish.
- Nozzle Cleaning: While the nozzle retracts for hygienic storage, it can be manually cleaned. Gently extend the nozzle and wipe it with a soft cloth and a mild disinfectant. You can also briefly turn on the water at low pressure to rinse the nozzle.
- Inspection: Periodically check all connections for tightness to prevent leaks.
Troubleshooting
If you encounter issues with your Brondell SMB-15, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose connections, improperly installed washers. | Ensure all connections (T-Valve, hoses, bidet attachment) are securely tightened. Check that all washers are correctly seated. |
| No Water Spray | Water supply turned off, control knob not open, clogged nozzle. | Verify the toilet's water supply valve is fully open. Ensure the bidet's control knob is turned to an open position. Check the nozzle for any obstructions and clean if necessary. |
| Insufficient Water Pressure | Partially closed water supply, control knob not fully open. | Confirm the toilet's water supply valve is completely open. Rotate the bidet's control knob further to increase pressure. |
| Nozzle Misalignment | Bidet attachment not securely fastened. | Ensure the bidet attachment is firmly secured to the toilet bowl using the mounting hardware. Adjust the swing-action arm lever for precise positioning. |
Specifications
- Model Number: SMB-15
- Brand: Brondell
- Color: Chrome
- Material: Brass
- Operation Mode: Manual
- Item Weight: 1.9 pounds
- Unit Count: 1 Count
- UPC: 819911014934
- Included Components: Bidet Attachment, Metal Nut, Metal Washer, Mounting Guide Bolt, Small Rubber Washer, Stainless Steel T-Valve, Metal Braided Cold-Water Supply Hose
Image: A technical diagram illustrating the dimensions and key components of the Brondell SMB-15 bidet attachment, including the attachment bracket, control valve body, and spray wand.
Warranty Information
The Brondell SMB-15 Side Mounted Manual Bidet Attachment comes with a 1-Year Limited Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Brondell website or contact customer support.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Brondell customer service. You can find contact information on the official Brondell website: www.brondell.com.
