Quick QNC CHC Chain Counter

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Quick QNC CHC Chain Counter. Please read this manual thoroughly before using the device to ensure proper function and safety. The Quick QNC CHC Chain Counter is designed to accurately measure and display the length of anchor chain deployed or retrieved, enhancing control and safety during anchoring operations.

Setup and Installation

Proper installation is crucial for the accurate and reliable operation of your QNC CHC Chain Counter. It is recommended that installation be performed by qualified personnel.

Package Contents

• Quick QNC CHC Chain Counter Unit
• Mounting Hardware
• Connection Cables
• User Manual (this document)

Mounting the Unit

Select a suitable location on your vessel's dashboard or control panel that is easily visible and accessible. Ensure the mounting surface is flat and stable. Use the provided mounting hardware to secure the unit. Refer to the included mounting template for precise drilling locations.

Electrical Connections

Connect the chain counter to your vessel's 12V or 24V DC power supply, ensuring correct polarity. Connect the sensor cable from the anchor windlass to the designated input on the chain counter unit. Consult the wiring diagram provided with the product packaging for detailed connection instructions. Ensure all connections are secure and waterproof.

This image displays the Quick QNC CHC Chain Counter's main screen. It shows the current chain status as 'CHAIN UP' with a speed of '15.0 m/min'. The large central number indicates '10.5 m' of chain deployed, and below it, 'REMAINING CHAIN: 05.0 m'. The screen also features a power button, a red downward arrow button, and a green upward arrow button.

Operating Instructions

Powering On/Off

Press and hold the Power Button (circular icon) located on the front panel to turn the unit on or off. The display will illuminate upon power-on.

Chain Deployment and Retrieval

• To deploy chain: Press the Red Downward Arrow Button. The display will show the increasing length of deployed chain.
• To retrieve chain: Press the Green Upward Arrow Button. The display will show the decreasing length of deployed chain.
• The display will indicate "CHAIN UP" or "CHAIN DOWN" along with the speed of chain movement (e.g., "SPEED: 15.0 m/min").

Display Information

The main display shows the current length of chain deployed in meters (e.g., "10.5 m"). Below this, it may show "REMAINING CHAIN" if a target length has been set or if the system is configured to track total chain length.

Setting Chain Length (if applicable)

Refer to the detailed programming section in the full product manual for instructions on setting alarms for specific chain lengths or configuring the total chain length for accurate remaining chain calculations.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your chain counter.

Cleaning

Wipe the display and unit casing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the display or plastic components. Ensure the unit is powered off before cleaning.

Inspection

Periodically inspect all cables and connections for signs of wear, corrosion, or damage. Ensure all connections remain secure. Check the sensor unit at the windlass for any debris or obstructions that might affect its operation.

Storage

If the vessel is to be stored for an extended period, ensure the chain counter is powered off. For long-term storage in harsh environments, consider covering the unit or removing it if possible, to protect it from extreme temperatures and moisture.

Troubleshooting

This section addresses common issues you might encounter with your QNC CHC Chain Counter.

Unit Does Not Power On

• Check the power supply connection to ensure it is secure and receiving adequate voltage (12V/24V DC).
• Verify that the vessel's battery is charged and the circuit breaker or fuse for the chain counter is not tripped or blown.
• Ensure the power button is pressed and held sufficiently long to activate the unit.

Inaccurate Chain Length Reading

• Inspect the sensor unit at the windlass for any debris, fouling, or damage that might impede its operation.
• Ensure the sensor cable is securely connected to both the sensor and the chain counter unit.
• Verify that the chain counter has been calibrated correctly for your specific chain and windlass setup. Refer to the full manual for calibration procedures.

Buttons Are Unresponsive

• Ensure the unit is powered on.
• Check for any physical obstructions or damage to the buttons.
• If the issue persists, try cycling the power to the unit.

If you encounter issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Quick Products customer support.

Specifications

Warranty Information

The Quick QNC CHC Chain Counter comes with a manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty documentation included with your product packaging or visit the official Quick Products website. Keep your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact Quick Products customer support. You can find contact information on the manufacturer's official website or through your authorized dealer. When contacting support, please have your product model number (181253) and ASIN (B09ZJ1P9P3) ready.

For more information, visit the Quick Products Store on Amazon.